Jump to content


  • Posts

  • Joined

  • Last visited

Microcosmo's Achievements

ISF Newbie

ISF Newbie (1/5)

  1. Hello! Thanks for pointing that out. Actually I did press cancel but it was because the device never become ready again(No reference position found) as shown in the status bar. I can't verify the disc against the image because the drive just outright won't recognize the disc, which I thought is strange because I have had coasters (not DL) before. They won't work properly but at least drive can detect it. I am just curious as to what "No reference position found" means and what could be the cause of it. Thanks for the reply.
  2. Thanks for the reply! Here is the log i found: ; //****************************************\\ ; ImgBurn Version - Log ; 土曜日, 27 10月 2007, 12:58:27 ; \\****************************************// ; ; I 12:05:01 ImgBurn Version started! I 12:05:01 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 12:05:01 Total Physical Memory: 1,048,048 KB - Available: 774,724 KB I 12:05:02 Initialising SPTI... I 12:05:02 Searching for SCSI / ATAPI devices... I 12:05:02 Found 2 DVD-ROMs and 1 DVD±RW/RAM! I 12:06:51 Operation Started! I 12:06:51 Source File: C:\game\SK-CD.mds I 12:06:51 Source File Sectors: 3,592,784 (MODE1/2048) I 12:06:51 Source File Size: 7,358,021,632 bytes I 12:06:51 Source File Volume Identifier: SK-CD I 12:06:51 Source File Application Identifier: DDXAM05B6M064746MN I 12:06:51 Source File Implementation Identifier: Settec I 12:06:51 Source File File System(s): ISO9660, Joliet, UDF (1.02) I 12:06:51 Destination Device: [1:0:0] LITE-ON DVDRW LH-20A1P KL0N (F:) (ATA) I 12:06:51 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x) I 12:06:51 Destination Media Sectors: 4,173,824 I 12:06:51 Write Mode: DVD I 12:06:51 Write Type: DAO I 12:06:51 Write Speed: 2.4x I 12:06:51 Link Size: Auto I 12:06:51 Test Mode: No I 12:06:51 BURN-Proof: Enabled I 12:06:51 Optimal L0 Data Zone Capacity: 2,084,960 I 12:06:51 Optimal L0 Data Zone Method: Copied From Original Disc I 12:07:55 Filling Buffer... (20 MB) I 12:07:59 Writing LeadIn... I 12:08:02 Writing Image... (LBA: 0 - 3592783) I 12:08:02 Writing Layer 0... (LBA: 0 - 2084959) I 12:29:39 Writing Layer 1... (LBA: 2084960 - 3592783) I 12:45:17 Synchronising Cache... I 12:45:22 Closing Track... I 12:45:23 Finalising Disc... I 12:52:21 Image MD5: 98c591db911d430adbbb80b91a0c6fa0 I 12:52:21 Operation Successfully Completed! - Duration: 00:45:30 I 12:52:21 Average Write Rate: 3,216 KB/s (2.3x) - Maximum Write Rate: 3,334 KB/s (2.4x) I 12:52:21 Cycling Tray before Verify... W 12:52:27 Waiting for device to become ready... I 12:58:15 Abort Request Acknowledged E 12:58:15 Device Not Ready - No Reference Position Found E 12:58:15 Operation Aborted! I 12:58:27 Close Request Acknowledged I 12:58:27 Closing Down... I 12:58:27 Shutting down SPTI... I 12:58:27 ImgBurn closed!
  3. Hello forum! First-time poster here. First I want to thank LUK for making such a wonderful program. It is far better than other programs I came across. However I had a little trouble last night when I burnt a DVD+R DL for the first time. I was trying to burn a computer game from an image. Everything works fine until the last verifying step, where the status bar say "No reference position found". Afterward the drive wont even read the disc! But it can still detect a blank media from the same spindle. And strangely it works, though sluggishly, on my laptop. I tried it 3 times and I got the same results. If there was anything unusual, I did notice that it spent a long time in the "finalising" step (~7 mins) after writing completed. I just have no idea what went wrong. Any helps and suggestions would be appreciated. Thank you! Drive(Desktop): Lite-on LH-20A1P Firmware: KL0N Media: Verbatim DVD+R DL MKM001 (MII) Drive(Laptop): Nec ND-6500A Firmware: 203D
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.