![](https://forum.imgburn.com/uploads/set_resources_1/84c1e40ea0e759e3f1505eb1788ddf3c_pattern.png)
wanghiking
-
Posts
7 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by wanghiking
-
-
Is there a possibility that a drive can burn CD DVD, but DVD DL burning mal-function? I would also like to know that it's just the media's problem rather than the hardware problem, as the burner never gave me problem before. And I love ImgBurn.
-
Yes, seriously, over a year, Ritek works fine for me.
I am just afraid that the burner might have some problem...judging from the log, is it appearing to having some problem?
But I tested with CDR and DVD-R, both OK.
-
Yes, the firmware is a possible solution, but it's not working. Wasted another disc.
Just all of a sudden. Can no longer burn DVD DL
-
thank you for your kind reply. But for the media itself, I had been using this kinda DL discs for almost a year, never brings me any problem.
Only recently I reinstalled my XP.
-
The log as follows:
I 05:52:30 Found 1 DVD-ROM/CD-RW and 1 DVD±RW!
I 05:52:53 Operation Started!
I 05:52:53 Source File: F:\Mass_Effect_USA_XBOX360-PROTOCOL\ptc-me.dvd
I 05:52:53 Source File Sectors: 3,825,924 (MODE1/2048)
I 05:52:53 Source File Size: 7,835,492,352 bytes
I 05:52:53 Source File Volume Identifier: XGD2DVD_NTSC
I 05:52:53 Source File Implementation Identifier: Sonic Scenarist 3.1
I 05:52:53 Source File File System(s): ISO9660, UDF (1.02)
I 05:52:53 Destination Device: [0:0:0] BENQ DVD DD EW162I 47N9 (K:) (USB)
I 05:52:53 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 2.4x)
I 05:52:53 Destination Media Sectors: 4,173,824
I 05:52:53 Write Mode: DVD
I 05:52:53 Write Type: DAO
I 05:52:53 Write Speed: MAX
I 05:52:53 Link Size: Auto
I 05:52:53 Test Mode: No
I 05:52:53 BURN-Proof: Enabled
I 05:52:53 Optimal L0 Data Zone Capacity: 1,913,760
I 05:52:53 Optimal L0 Data Zone Method: Copied From Original Disc
I 05:52:54 Filling Buffer... (40 MB)
I 05:52:56 Writing LeadIn...
W 05:53:10 Failed to Write Sectors 0 - 31 - Session Fixation Error Writing Lead In
W 05:53:10 Retrying (1 of 20)...
W 05:57:42 Retry Failed - Power Calibration Area Is Full
E 05:57:55 Failed to Write Sectors 0 - 31 - Session Fixation Error Writing Lead In
I 05:57:55 Synchronising Cache...
I 05:57:56 Closing Track...
I 05:57:57 Finalising Disc...
E 05:57:59 Finalise Disc Failed! - Reason: Invalid Field in CDB
I 05:57:59 Finalising Disc (Last Attempt!)...
E 05:57:59 Finalise Disc Failed! - Reason: Invalid Field in CDB
E 05:57:59 Failed to Write Image!
E 05:57:59 Operation Failed! - Duration: 00:05:05
I 05:57:59 Average Write Rate: N/A - Maximum Write Rate: N/A
I 05:58:10 Close Request Acknowledged
I 05:58:10 Closing Down...
I 05:58:10 Shutting down SPTI...
I 05:58:10 ImgBurn closed!
-
I have a Benq dual layer DVD burner, and I use the newest edition of Imgburn to burn XBOX360's D9 rom.
But starting from yesterday, I already wasted 10 dual layer blank disks, as each time I was using Imgburn, in writing lead in, always failed as "Session Fixation Error Writing Lead In", no disk can be burned any more. While if I use the same burner for D5 or CD, it's working.
I need to indenty where the problem is. Whether it's my system problem? Software problem or my Dvd burner problem?
Can anyone give me a hand?
Thank you.
Help!!!XBOX360 Rom Burning Problem
in ImgBurn Support
Posted
you guys might be right. I tried another 5 discs, one of them can write lead-in, but when it's 50%, it failed.
I already put order of Verbatims DLs...hope it works.
Thank you.