Jump to content

Error while Writing DVD

joelee

By joelee
in Chat

 Share

Recommended Posts

joelee ISF Newbie

joelee

Posted
Posted

Hi,

 

I have Hp pavilion dv6114tx laptop which is giving the following error and writing only 10% of the file and

ejecting automatically with an error "Writing Failed". The writing log is in this manner.

 

Can anybody help me ...

 

 

 

Windows XP 5.1

IA32

WinAspi: -

 

NT-SPTI used

Nero Version: 8.3.2.1

Internal Version: 8, 3, 2, 1

 

Recorder: <HL-DT-ST DVDRAM GSA-4084N>Version: KQ09 - HA 1 TA 0 - 8.3.2.1

Adapter driver: <IDE> HA 1

Drive buffer : 2048kB

Bus Type : default

CD-ROM: <HL-DT-ST DVDRAM GSA-4084N>Version: KQ09 - HA 1 TA 0 - 8.3.2.1

Adapter driver: <IDE> HA 1

 

=== Scsi-Device-Map ===

CdRomPeripheral : HL-DT-ST DVDRAM GSA-4084N atapi Port 0 ID 0 DMA: On

DiskPeripheral : HTS541080G9SA00 iaStor Port 2 ID 0 DMA: On

 

=== CDRom-Device-Map ===

HL-DT-ST DVDRAM GSA-4084N E: CdRom0

=======================

 

AutoRun : 1

Excluded drive IDs:

WriteBufferSize: 83886080 (0) Byte

BUFE : 0

Physical memory : 1533MB (1570796kB)

Free physical memory: 697MB (714548kB)

Memory in use : 54 %

Uncached PFiles: 0x0

Use Inquiry : 1

Global Bus Type: default (0)

Check supported media : Disabled (0)

 

14.4.2009

CD-ROM (ISO)

20:12:14 #1 Text 0 File SCSIPTICommands.cpp, Line 450

LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

 

20:12:15 #2 Text 0 File Isodoc.cpp, Line 6713

Iso document burn settings

------------------------------------------

Determine maximum speed : TRUE

Simulate : FALSE

Write : TRUE

Finalize CD : TRUE

Multisession : FALSE

Burning mode : DAO

Mode : 1

ISO Level : 1 (Max. of 11 = 8 + 3 char)

Character set : ISO 9660

Joliet : TRUE

Allow pathdepth more than 8 directories : TRUE

Allow more than 255 characters in path : TRUE

Write ISO9660 ;1 file extensions : TRUE

 

20:12:15 #3 Text 0 File Burncd.cpp, Line 3238

HL-DT-ST DVDRAM GSA-4084N

Buffer underrun protection activated

 

20:12:15 #4 ISO9660GEN -11 File Geniso.cpp, Line 3349

First writeable address = 0 (0x00000000)

 

20:12:16 #5 SPTI -1080 File SCSIPassThrough.cpp, Line 196

CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1080)

CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00

Sense Key: 0x02 (KEY_NOT_READY)

Sense Code: 0x3A

Sense Qual: 0x00

Sense Area: 0x70 00 02 00 00 00 00 10 00 00 BB 00 3A

Buffer x07827d40: Len x20

 

20:12:16 #6 SPTI -1080 File SCSIPassThrough.cpp, Line 196

CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1080)

CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00

Sense Key: 0x02 (KEY_NOT_READY)

Sense Code: 0x3A

Sense Qual: 0x00

Sense Area: 0x70 00 02 00 00 00 00 10 00 00 BB 00 3A

Buffer x07827d40: Len x20

 

20:12:16 #7 SPTI -1080 File SCSIPassThrough.cpp, Line 196

CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1080)

CDB Data: 0x52 01 00 00 00 FF 00 00 20 00 00 00

Sense Key: 0x02 (KEY_NOT_READY)

Sense Code: 0x3A

Sense Qual: 0x00

Sense Area: 0x70 00 02 00 00 00 00 10 00 00 BB 00 3A

Buffer x07827d40: Len x20

 

20:12:16 #8 SPTI -1080 File SCSIPassThrough.cpp, Line 196

CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1080)

CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00

Sense Key: 0x02 (KEY_NOT_READY)

Sense Code: 0x3A

Sense Qual: 0x00

Sense Area: 0x70 00 02 00 00 00 00 10 00 00 BB 00 3A

Buffer x07827d40: Len x20

 

20:12:16 #9 SPTI -1080 File SCSIPassThrough.cpp, Line 196

CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1080)

CDB Data: 0x52 01 00 00 00 FF 00 00 20 00 00 00

Sense Key: 0x02 (KEY_NOT_READY)

Sense Code: 0x3A

Sense Qual: 0x00

Sense Area: 0x70 00 02 00 00 00 00 10 00 00 BB 00 3A

Buffer x07827d40: Len x20

 

20:12:16 #10 Text 0 File Burncd.cpp, Line 3568

Turn on Disc-At-Once, using CD-R/RW media

 

20:12:17 #11 SPTI -1080 File SCSIPassThrough.cpp, Line 196

CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1080)

CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00

Sense Key: 0x02 (KEY_NOT_READY)

Sense Code: 0x3A

Sense Qual: 0x00

Sense Area: 0x70 00 02 00 00 00 00 10 00 00 BB 00 3A

Buffer x07827d40: Len x20

 

20:12:17 #12 SPTI -1080 File SCSIPassThrough.cpp, Line 196

CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1080)

CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00

Sense Key: 0x02 (KEY_NOT_READY)

Sense Code: 0x3A

Sense Qual: 0x00

Sense Area: 0x70 00 02 00 00 00 00 10 00 00 BB 00 3A

Buffer x07827d40: Len x20

 

20:12:17 #13 SPTI -1080 File SCSIPassThrough.cpp, Line 196

CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1080)

CDB Data: 0x52 01 00 00 00 FF 00 00 20 00 00 00

Sense Key: 0x02 (KEY_NOT_READY)

Sense Code: 0x3A

Sense Qual: 0x00

Sense Area: 0x70 00 02 00 00 00 00 10 00 00 BB 00 3A

Buffer x07827d40: Len x20

 

20:12:17 #14 SPTI -1080 File SCSIPassThrough.cpp, Line 196

CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1080)

CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00

Sense Key: 0x02 (KEY_NOT_READY)

Sense Code: 0x3A

Sense Qual: 0x00

Sense Area: 0x70 00 02 00 00 00 00 10 00 00 BB 00 3A

Buffer x07827d40: Len x20

 

20:12:17 #15 SPTI -1080 File SCSIPassThrough.cpp, Line 196

CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1080)

CDB Data: 0x52 01 00 00 00 FF 00 00 20 00 00 00

Sense Key: 0x02 (KEY_NOT_READY)

Sense Code: 0x3A

Sense Qual: 0x00

Sense Area: 0x70 00 02 00 00 00 00 10 00 00 BB 00 3A

Buffer x07827d40: Len x20

 

20:13:17 #16 ISO9660GEN -11 File Geniso.cpp, Line 3349

First writeable address = 0 (0x00000000)

 

20:13:17 #17 Text 0 File FilesystemSettingsValidator.cpp, Line 142

FS Settings: using validator 'CUDFSettingsValidatorCD'

ParamMode = 'automatic', changing UDF partition type from 'physical' to 'physical'

Changing UDF revision from '1.02' to '1.02'

 

20:13:19 #18 Text 0 File DlgWaitCD.cpp, Line 311

Last possible write address on media: 359848 ( 79:59.73)

Last address to be written: 297427 ( 66:07.52)

 

20:13:19 #19 Text 0 File DlgWaitCD.cpp, Line 323

Write in overburning mode: NO (enabled: CD)

 

20:13:19 #20 Text 0 File DlgWaitCD.cpp, Line 2932

Recorder: HL-DT-ST DVDRAM GSA-4084N;

CDR code: 00 97 27 18; OSJ entry from: Plasmon Data systems Ltd.

ATIP Data:

Special Info [hex] 1: D0 00 A0, 2: 61 1B 12 (LI 97:27.18), 3: 4F 3B 4A (LO 79:59.74)

Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

 

20:13:19 #21 Text 0 File DlgWaitCD.cpp, Line 497

>>> Protocol of DlgWaitCD activities: <<<

=========================================

Insert empty disc to write to.

(Medium in drive: Unknown. Medium required by compilation: CD-R/RW.)

 

20:13:19 #22 Text 0 File ThreadedTransferInterface.cpp, Line 754

Setup items (after recorder preparation)

0: TRM_DATA_MODE1 ()

2 indices, index0 (150) not provided

original disc pos #0 + 297428 (297428) = #297428/66:5.53

relocatable, disc pos for caching/writing not required/ required

-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 297428 blocks [E: HL-DT-ST DVDRAM GSA-4084N]

--------------------------------------------------------------

 

20:13:19 #23 Text 0 File ThreadedTransferInterface.cpp, Line 956

Prepare [E: HL-DT-ST DVDRAM GSA-4084N] for write in CUE-sheet-DAO

DAO infos:

==========

MCN: ""

TOCType: 0x00; Session Closed, disc fixated

Tracks 1 to 1: Idx 0 Idx 1 Next Trk

1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 609439744, ISRC ""

DAO layout:

===========

___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________

-150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00

-150 | 1 | 0 | 0x41 | 0 | 0 | 0x00

0 | 1 | 1 | 0x41 | 297428 | 0 | 0x00

297428 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

 

20:13:19 #24 Text 0 File SCSIPTICommands.cpp, Line 240

SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

 

20:13:19 #25 Text 0 File Burncd.cpp, Line 4359

Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

 

20:13:19 #26 Phase 24 File dlgbrnst.cpp, Line 1767

Caching of files started

 

20:13:19 #27 Text 0 File Burncd.cpp, Line 4481

Cache writing successful.

 

20:13:19 #28 Phase 25 File dlgbrnst.cpp, Line 1767

Caching of files completed

 

20:13:19 #29 Phase 28 File dlgbrnst.cpp, Line 1767

Speed measurement started

 

20:13:19 #30 Text 0 File ThreadedTransferInterface.cpp, Line 2673

Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

 

20:13:19 #31 Text 0 File ThreadedTransfer.cpp, Line 269

Pipe memory size 590400

 

20:13:48 #32 Text 0 File WriterStatus.cpp, Line 245

<E: HL-DT-ST DVDRAM GSA-4084N> start writing Lead-Out at LBA 297428 (489D4h), length 0 blocks

 

20:13:48 #33 Phase 29 File dlgbrnst.cpp, Line 1716

Speed measurement completed: 141.6x (21,254 KB/s)

 

20:13:48 #34 Phase 36 File dlgbrnst.cpp, Line 1767

Burn process started at 24x (3,600 KB/s)

 

20:13:48 #35 Text 0 File ThreadedTransferInterface.cpp, Line 2673

Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

 

20:13:48 #36 Text 0 File MMC.cpp, Line 17846

StartDAO : CD-Text - Off

 

20:13:48 #37 Text 0 File MMC.cpp, Line 22530

Set BUFE: Buffer underrun protection -> ON

 

20:13:48 #38 Text 0 File MMC.cpp, Line 18074

CueData, Len=32

41 00 00 14 00 00 00 00

41 01 00 10 00 00 00 00

41 01 01 10 00 00 02 00

41 aa 01 14 00 42 07 35

 

20:13:48 #39 Text 0 File ThreadedTransfer.cpp, Line 269

Pipe memory size 83836800

 

20:14:03 #40 Text 0 File Cdrdrv.cpp, Line 1404

20:14:03.078 - E: HL-DT-ST DVDRAM GSA-4084N : Queue again later

 

20:15:29 #41 SPTI -1039 File SCSIPassThrough.cpp, Line 196

CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1039)

CDB Data: 0x2A 00 00 00 BD 80 00 00 20 00 00 00

Sense Key: 0x04 (KEY_HARDWARE_ERROR)

Sense Code: 0x09

Sense Qual: 0x02

Sense Area: 0x70 00 04 00 00 00 00 10 34 14 04 80 09 02

Buffer x0b283bc0: Len x10000

0x66 90 FB 38 27 09 7D B0 45 89 05 C9 D2 E3 47 C6

0x7F 15 AC 45 64 AA 83 12 52 29 D7 0B 2E A8 90 49

0xCA C3 7E B0 FF 95 CA 19 D8 32 B0 91 D0 60 AC 74

 

20:15:29 #42 CDR -1039 File Writer.cpp, Line 306

Focus or tracking error

E: HL-DT-ST DVDRAM GSA-4084N

 

20:15:29 #43 SPTI -1039 File SCSIPassThrough.cpp, Line 196

CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1039)

CDB Data: 0x35 02 00 00 00 00 00 00 00 00 00 00

Sense Key: 0x04 (KEY_HARDWARE_ERROR)

Sense Code: 0x09

Sense Qual: 0x02

Sense Area: 0x71 00 04 00 00 00 00 10 34 14 04 80 09 02

 

20:15:29 #44 CDR -1039 File WriterStatus.cpp, Line 292

Focus or tracking error

E: HL-DT-ST DVDRAM GSA-4084N

 

20:15:29 #45 TRANSFER -24 File WriterStatus.cpp, Line 292

Could not perform end of Disc-at-once

 

20:15:30 #46 Phase 38 File dlgbrnst.cpp, Line 1767

Burn process failed at 24x (3,600 KB/s)

 

20:15:30 #47 Text 0 File SCSIPTICommands.cpp, Line 287

SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

 

20:15:33 #48 Text 0 File Cdrdrv.cpp, Line 11420

DriveLocker: UnLockVolume completed

 

20:15:33 #49 Text 0 File SCSIPTICommands.cpp, Line 450

UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

 

 

Existing drivers:

 

Registry Keys:

HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Link to comment
Share on other sites
Guest
This topic is now closed to further replies.
 Share
Go to topic listing
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

  I accept