DL Burnproblems

[midimaster]

I'm trying to find out if my burner, media or .iso is bad. I cannot trace the error's because they appear without reason.

Sometimes I can write a DL-Disc without a problem, the next time I got an error.

 

Here's my log, i use a LG GH22 burner (but already tried it with a Lite-on and NEC also) and I use Verbatim DL+R.

In this case I'm trying to burn a xbox360 game.

 

I 12:16:59 ImgBurn Version 2.4.4.0 started!

I 12:16:59 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 3)

I 12:16:59 Total Physical Memory: 2.095.180 KB - Available: 896.212 KB

I 12:16:59 Initialising SPTI...

I 12:16:59 Searching for SCSI / ATAPI devices...

I 12:16:59 Found 1 DVD-ROM, 1 DVD-ROM/CD-RW, 1 DVD

[LIGHTNING UK!]

2.4x is not a valid speed on that drive.

 

The media you're using is rated for 8x, so try burning at that speed... your drive might do a better job.

[midimaster]

2.4x is not a valid speed on that drive.

 

The media you're using is rated for 8x, so try burning at that speed... your drive might do a better job.

 

Tried to burn a DVD9 movie at 4x speed with NERO, got this (don't want to lose any more DVD DL's):

 

Windows XP 5.1

IA32

WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 17-7-2002 11:03:20

ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2-11-2004 13:54:32

 

NT-SPTI used

Nero Version: 6.6.1.15

Internal Version: 6, 6, 1, 15

 

Recorder: <HL-DT-ST DVD-RAM GH22NP20>Version: 1.03 - HA 1 TA 4 - 6.6.1.15

Adapter driver: <IDE> HA 1

Drive buffer : 2048kB

Bus Type : via Inquiry data (1) -> ATAPI, detected: ?

Connected to MMC as unknown drive with class-nr : 1

Drive is autodetected - recorder class: Std. MMC recorder

CD-ROM: <WV3501A QXR349R >Version: 1.0 - HA 1 TA 2 - 6.6.1.15

Adapter driver: <SCSI> HA 1

 

=== Scsi-Device-Map ===

CdRomPeripheral : TSSTcorp CDRW/DVD TSH492B atapi Port 0 ID 0 DMA: On

CdRomPeripheral : HL-DT-ST DVD-RAM GH22NP20 atapi Port 0 ID 1 DMA: On

DiskPeripheral : WDC WD800JD-75JNA0 atapi Port 1 ID 0 DMA: On

DiskPeripheral : Hitachi HDT725032VLA360 atapi Port 1 ID 1 DMA: On

CdRomPeripheral : WV3501A QXR349R 1.0 ajbiv0ry Port 2 ID 0 DMA: Off

 

=== CDRom-Device-Map ===

HL-DT-ST DVD-RAM GH22NP20 E: CDRom4

TSSTcorp CDRW/DVD TSH492B F: CDRom0

WV3501A QXR349R H: CDRom2

SanDisk Cruzer K: CDRom6

=======================

 

AutoRun : 0

Excluded drive IDs:

WriteBufferSize: 83886080 (0) Byte

ShowDrvBufStat : 0

BUFE : 0

Physical memory : 2046MB (2095180kB)

Free physical memory: 1046MB (1071264kB)

Memory in use : 48 %

Uncached PFiles: 0x0

Use Inquiry : 1

Global Bus Type: default (0)

Check supported media : Disabled (0)

 

21.5.2009

DVD-image branden

17:21:21 #1 Text 0 File SCSIPTICommands.cpp, Line 403

LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

 

17:21:22 #2 Text 0 File Burncd.cpp, Line 3316

Turn on Disc-At-Once, using DVD media

 

17:21:22 #3 Text 0 File DlgWaitCD.cpp, Line 281

Last possible write address on media: 4173823 (927:30.73, 8151MB)

Last address to be written: 3716143 (825:48.43, 7258MB)

 

17:21:22 #4 Text 0 File DlgWaitCD.cpp, Line 293

Write in overburning mode: NO (enabled: CD)

 

17:21:22 #5 Text 0 File DlgWaitCD.cpp, Line 2616

Recorder: HL-DT-ST DVD-RAM GH22NP20, Media type: DVD+R9 Double Layer

Disc Manufacturer ID: MKM, Media Type ID: 003, Product revision number: 0

Disc Application Code: 0, Extended Information Indicators: 3

 

17:21:22 #6 Text 0 File DlgWaitCD.cpp, Line 459

>>> Protocol of DlgWaitCD activities: <<<

=========================================

 

17:21:22 #7 Text 0 File ThreadedTransferInterface.cpp, Line 814

Setup items (after recorder preparation)

0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)

2 indices, index0 (150) not provided

original disc pos #0 + 3716144 (3716144) = #3716144/825:48.44

not relocatable, disc pos for caching/writing not required/not required

-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 3716144 blocks [HL-DT-ST DVD-RAM GH22NP20]

--------------------------------------------------------------

 

17:21:22 #8 Text 0 File ThreadedTransferInterface.cpp, Line 1013

Prepare recorder [HL-DT-ST DVD-RAM GH22NP20] for write in CUE-sheet-DAO

DAO infos:

==========

MCN: ""

TOCType: 0x00; Session Closed, disc fixated

Tracks 1 to 1:

1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 7610662912, ISRC ""

DAO layout:

===========

__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________

0 | lead-in | 0 | 0x41 | 0x00

0 | 1 | 0 | 0x41 | 0x00

0 | 1 | 1 | 0x41 | 0x00

3716144 | lead-out | 1 | 0x41 | 0x00

 

17:21:22 #9 Text 0 File SCSIPTICommands.cpp, Line 208

SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

 

17:21:22 #10 Phase 24 File dlgbrnst.cpp, Line 1685

Caching of files started

 

17:21:22 #11 Text 0 File Burncd.cpp, Line 4158

Cache writing successful.

 

17:21:22 #12 Phase 25 File dlgbrnst.cpp, Line 1685

Caching of files completed

 

17:21:22 #13 Phase 36 File dlgbrnst.cpp, Line 1685

Burn process started at 4x (5.540 kB/sec)

 

17:21:22 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2717

Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

 

17:21:22 #15 SPTI -1066 File SCSIPassThrough.cpp, Line 178

CdRom4: SCSIStatus(x02) WinError(0) NeroError(-1066)

Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)

Sense Code: 0x24

Sense Qual: 0x00

CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00

Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24

Buffer x06010180: Len x648

 

17:21:22 #16 Text 0 File DVDPlusDualLayer.cpp, Line 466

Disc finalized, LBA total Image size: 3716144 (7258MB), Last LBA L0: 1858079 (3629MB)

 

17:21:22 #17 Text 0 File DVDPlusDualLayer.cpp, Line 631

L0 Data Zone Capacity set to 1858080 (1C5A20h, 3629MB) -> OK, confirmed setting

 

17:21:22 #18 CDR -1205 File DVDPlusDualLayer.cpp, Line 658

Burning Layer 1

 

17:21:22 #19 Text 0 File DVDPlusDualLayer.cpp, Line 668

Start writing layer 1 at address 0 (0h)

Recording mode: unknown Recording Mode

 

17:21:22 #20 Text 0 File Cdrdrv.cpp, Line 8737

---- DVD Structure: Physical Format Information (00h) ----

Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050

Book Type: DVD+R DL (14), Part Version: 1.0x (1)

Disc Size: 120 mm, Maximum Rate: <not specified> (F h)

Number of Layers: 2, Track Path: Opposite Track Path (OTP), Layer Type: recordable

Linear Density: 0,293 um/bit, Track Density: 0,74 um/track

Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)

End Physical Sector Number of Data Area: FCFFFF h

End Sector Number in Layer 0: 22D7FF h (LBN: 1FD7FF h, 4075 MB)

Data in Burst Cutting Area (BCA) does not exist

Disc Application Code: 0 / 0 h

Extended Information indicators: 3 h

Disc Manufacturer ID: MKM.....

Media type ID: 003

Product revision number: 0

Number of Physical format information bytes in use in ADIP up to byte 63: 64

Media Specific [16..63]:

00 00 03 4D 4B 4D 00 00 - 00 00 00 30 30 33 00 40 ...MKM.....003.@

25 25 37 0C 02 2D 66 02 - 2D 66 21 23 0D 0E 14 14 %%7..-f.-f!#....

02 01 01 10 00 21 23 0D - 0E 14 14 02 01 01 10 00 .....!#.........

 

17:21:22 #21 Text 0 File DVDR.cpp, Line 5715

Drive: HL-DT-ST DVD-RAM GH22NP20

Book Type request [LG]: DVD-ROM

Changing the Book Type was finished successfully, return code 0

 

17:21:22 #22 CDR -1207 File DVDR.cpp, Line 5645

Book Type automatically set to: DVD-ROM

 

17:21:22 #23 SPTI -1066 File SCSIPassThrough.cpp, Line 178

CdRom4: SCSIStatus(x02) WinError(0) NeroError(-1066)

Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)

Sense Code: 0x24

Sense Qual: 0x00

CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00

Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24

Buffer x06011080: Len x648

 

17:21:22 #24 Text 0 File DVDPlusRW.cpp, Line 666

Start write address at LBA 0

DVD high compatibility mode: Yes

 

17:31:21 #25 SPTI -1135 File SCSIPassThrough.cpp, Line 178

CdRom4: SCSIStatus(x02) WinError(0) NeroError(-1135)

Sense Key: 0x03 (KEY_MEDIUM_ERROR)

Sense Code: 0x0C

Sense Qual: 0x00

CDB Data: 0x2A 00 00 17 8F 20 00 00 20 00 00 00

Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 0C

Buffer x0adef100: Len x10000

0x00 00 01 BA 44 EA C4 ED B6 03 01 89 C3 F8 00 00

0x01 BD 07 EC 81 80 05 21 3A B1 55 B5 81 01 04 25

0xBA 08 A8 96 05 88 EB 99 86 4E 46 F4 BB 14 25 95

 

17:31:21 #26 CDR -1135 File Writer.cpp, Line 281

Write error

E: HL-DT-ST DVD-RAM GH22NP20

 

17:31:27 #27 Phase 38 File dlgbrnst.cpp, Line 1685

Burn process failed at 4x (5.540 kB/sec)

 

17:31:28 #28 Text 0 File SCSIPTICommands.cpp, Line 253

SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

 

17:31:33 #29 Text 0 File Cdrdrv.cpp, Line 9945

DriveLocker: UnLockVolume completed

 

17:31:34 #30 Text 0 File SCSIPTICommands.cpp, Line 403

UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

 

 

Existing drivers:

File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=9464 bytes, created 8-3-2007 1:51:00

File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 17-7-2002 10:05:10

File 'Drivers\PXHELP20.SYS': Ver=3.00.67a, size=43872 bytes, created 23-2-2008 4:38:33 (Prassi/Veritas driver for win 2K)

File 'Drivers\scsiport.sys': Ver=5.1.2600.5512 (xpsp.080413-2108), size=96384 bytes, created 13-4-2008 20:40:30 (Adapter driver for src)

 

Registry Keys:

HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[mmalves]

Even though this isn't a Ner0 forum, it confirms that the problem isn't with ImgBurn

 

Try burning (with ImgBurn this time ) at 6x or 8x to see if it works. Anyway, you'd have better chances with the 2.4x Verbatim blanks (MKM-001-00 dye)

[midimaster]

Even though this isn't a Ner0 forum, it confirms that the problem isn't with ImgBurn

 

Try burning (with ImgBurn this time ) at 6x or 8x to see if it works. Anyway, you'd have better chances with the 2.4x Verbatim blanks (MKM-001-00 dye)

 

Ok, at 6x speed the DVD DL 's burn fine.. (although they won't work at my xbox360).. so you suspect I use the wrong DVD+R DL?

 

Tnx anyway for answering (although it was a Ner0 question, i was simply filtering things..).

 

[mmalves]

The Verbatim 2.4x blanks have been around longer than the 8x ones and they're better supported by burners. Seeing as x360 drives are quite picky about the media I guess you should try with a few Verbatim 2.4x blanks to see how it turns out

[midimaster]

The Verbatim 2.4x blanks have been around longer than the 8x ones and they're better supported by burners. Seeing as x360 drives are quite picky about the media I guess you should try with a few Verbatim 2.4x blanks to see how it turns out

 

Still waiting for 2.4x DVD+R DL's to be delivered, I was simply trying to burn at 6x speed again..

Now to my surprise it went wrong at 6x also!

 

This error occured:

 

I 16:17:38 ImgBurn Version 2.4.4.0 started!

I 16:17:38 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 3)

I 16:17:38 Total Physical Memory: 2.095.180 KB - Available: 844.344 KB

I 16:17:38 Initialising SPTI...

I 16:17:38 Searching for SCSI / ATAPI devices...

I 16:17:57 Found 1 DVD-ROM, 1 DVD-ROM/CD-RW, 1 DVD

[mmalves]

You may want to try a lens cleaning disc on that drive