nedkamar Posted August 4, 2009 Share Posted August 4, 2009 Need to write an image to a DVD +R DL, but write button is greyed out. Works fine with a DVD-RW disk. DVD burner specs support DVD +R DL disks. Here is the screen info and portion of the log file showing the SENSE error. Is it a disk problem or the DVD burner? Thank you TSSTcorp CD/DVDW TS-L532U GA03 (USB) Current Profile: DVD+R DL Disc Information: Status: Complete Erasable: No Sessions: 1 Supported Write Speeds: 2.4x, 4x, 6x, 8x DVD Link to comment Share on other sites More sharing options...
Cynthia Posted August 4, 2009 Share Posted August 4, 2009 Hi and welcome to the forum, nedkamar! Status: Complete Your burner thinks the disc has already been used. It should state this if the disc is empty. Status: Empty Link to comment Share on other sites More sharing options...
nedkamar Posted August 4, 2009 Author Share Posted August 4, 2009 Thank you for your quick response. These are new discs, so who is at fault, the discs or the dvd burner (firmware?) I checked the firmwarehq.com website and there is no firmware for this burner. Thanks Link to comment Share on other sites More sharing options...
mmalves Posted August 4, 2009 Share Posted August 4, 2009 Your drive doesn't seem to support those blanks. Try with Verbatim 2.4x blanks and it should work. If it still doesn't work, try a lens cleaning disc on that drive or you should be looking for a new (external) burner. Link to comment Share on other sites More sharing options...
Recommended Posts