Jump to content

BAD SCANS PART 3


the olde

Recommended Posts

Wot on earth am I doing wrong?

 

On LUK advice upgraded to Taiyo Yuden G02 discs & a Benq drive.

 

Its not working well, please look at scan, this is about the 10th Burn, I even knocked down the write speed to 4x.

 

Would using the computer when burning cause problems? only surfing at the same time.

 

Help. :pirate:

post-1595-1143824190_thumb.png

Link to comment
Share on other sites

Ignore the POF's, they're bogus!

 

Scan it again and they'll be gone. My BenQ does that too sometimes - or perhaps it's DVDInfoPro... who knows!

 

That'll bring the quality rating right up.

 

If your scans don't match up with (or better) those ones in the 'drives and media' forum, maybe you just got a slightly worse batch of discs.

 

You can't really compare scans from different drives... that's why I've done all mine with the 1640 and not moved up to the 1655. Even 2 of the same model can give different results. So long as you can scan discs burnt with your drives and compare the two, that's all that matters ;)

 

Oh and btw, the scans are all green.... that's good ;) Orange is worrying... Red is bad.

Link to comment
Share on other sites

Ignore the POF's, they're bogus!

 

Scan it again and they'll be gone. My BenQ does that too sometimes - or perhaps it's DVDInfoPro... who knows!

 

That'll bring the quality rating right up.

 

If your scans don't match up with (or better) those ones in the 'drives and media' forum, maybe you just got a slightly worse batch of discs.

 

You can't really compare scans from different drives... that's why I've done all mine with the 1640 and not moved up to the 1655. Even 2 of the same model can give different results. So long as you can scan discs burnt with your drives and compare the two, that's all that matters ;)

 

Oh and btw, the scans are all green.... that's good ;) Orange is worrying... Red is bad.

 

thankyou, put my mind at rest :P

Link to comment
Share on other sites

Ignore the POF's, they're bogus!

 

Scan it again and they'll be gone. My BenQ does that too sometimes - or perhaps it's DVDInfoPro... who knows!

 

That'll bring the quality rating right up.

 

If your scans don't match up with (or better) those ones in the 'drives and media' forum, maybe you just got a slightly worse batch of discs.

 

You can't really compare scans from different drives... that's why I've done all mine with the 1640 and not moved up to the 1655. Even 2 of the same model can give different results. So long as you can scan discs burnt with your drives and compare the two, that's all that matters ;)

 

Oh and btw, the scans are all green.... that's good ;) Orange is worrying... Red is bad.

 

second scan, same disc!!!

post-1595-1143832613_thumb.png

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.