Bad Burn

[Jimbo]

Was almost done when then had this problem:

 

I 18:43:53 Source File Sectors: 2,161,568 (MODE1/2048)

I 18:43:53 Source File Size: 4,426,891,264 bytes

I 18:43:53 Source File Volume Identifier: BD_VOLUME

I 18:43:53 Source File Application Identifier: ImgBurn v2.5.0.0

I 18:43:53 Source File Implementation Identifier: ImgBurn

I 18:43:53 Source File File System(s): UDF (2.50)

I 18:43:53 Destination Device: [1:3:0] TSSTcorp CDDVDW SH-S203N SB02 (F:) (RAID)

I 18:43:53 Destination Media Type: DVD-R (Disc ID: TYG02) (Speeds: 4x, 6x, 8x, 12x)

I 18:43:53 Destination Media Sectors: 2,297,888

I 18:43:53 Write Mode: DVD

I 18:43:53 Write Type: DAO

I 18:43:53 Write Speed: 8x

I 18:43:53 Link Size: Auto

I 18:43:53 Lock Volume: Yes

I 18:43:53 Test Mode: No

I 18:43:53 OPC: No

I 18:43:53 BURN-Proof: Enabled

I 18:43:53 Filling Buffer... (40 MB)

I 18:43:55 Writing LeadIn...

I 18:44:32 Writing Session 1 of 1... (1 Track, LBA: 0 - 2161567)

I 18:44:32 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 2161567)

I 18:51:53 Synchronising Cache...

I 18:52:15 Exporting Graph Data...

I 18:52:15 Graph Data File: C:\Users\durkinjt\AppData\Roaming\ImgBurn\Graph Data Files\TSSTcorp_CDDVDW_SH-S203N_SB02_WEDNESDAY-DECEMBER-23-2009_6-43_PM_TYG02_8x.ibg

I 18:52:15 Export Successfully Completed!

I 18:52:15 Operation Successfully Completed! - Duration: 00:08:22

I 18:52:15 Average Write Rate: 9,825 KB/s (7.1x) - Maximum Write Rate: 11,179 KB/s (8.1x)

I 18:52:15 Cycling Tray before Verify...

W 18:52:22 Waiting for device to become ready...

I 18:52:36 Device Ready!

I 18:52:37 Operation Started!

I 18:52:37 Source Device: [1:3:0] TSSTcorp CDDVDW SH-S203N SB02 (F:) (RAID)

I 18:52:37 Source Media Type: DVD-R (Book Type: DVD-R) (Disc ID: TYG02) (Speeds: 4x, 6x, 8x, 12x)

I 18:52:37 Image File: -==/\/[bUILD IMAGE]\/\==-

I 18:52:37 Image File Sectors: 2,161,568 (MODE1/2048)

I 18:52:37 Image File Size: 4,426,891,264 bytes

I 18:52:37 Image File Volume Identifier: BD_VOLUME

I 18:52:37 Image File Application Identifier: ImgBurn v2.5.0.0

I 18:52:37 Image File Implementation Identifier: ImgBurn

I 18:52:37 Image File File System(s): UDF (2.50)

I 18:52:37 Read Speed (Data/Audio): MAX / MAX

I 18:52:37 Verifying Session 1 of 1... (1 Track, LBA: 0 - 2161567)

I 18:52:37 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 2161567)

W 18:58:53 Failed to Read Sector 2081218 - Reason: Timeout on Logical Unit

W 18:58:53 Sector 2081218 maps to File: \BDMV\STREAM\00001.m2ts

W 18:59:04 Failed to Read Sector 2081218 - Reason: Timeout on Logical Unit

W 18:59:04 Sector 2081218 maps to File: \BDMV\STREAM\00001.m2ts

W 18:59:14 Failed to Read Sector 2081219 - Reason: Timeout on Logical Unit

W 18:59:14 Sector 2081219 maps to File: \BDMV\STREAM\00001.m2ts

W 18:59:18 Retrying (1)...

W 18:59:27 Retry Failed - Reason: Timeout on Logical Unit

E 18:59:30 Failed to Read Sector 2081219 - Reason: Timeout on Logical Unit

E 18:59:30 Sector 2081219 maps to File: \BDMV\STREAM\00001.m2ts

E 18:59:31 Failed to Verify Sectors!

I 18:59:31 Exporting Graph Data...

I 18:59:31 Graph Data File: C:\Users\durkinjt\AppData\Roaming\ImgBurn\Graph Data Files\TSSTcorp_CDDVDW_SH-S203N_SB02_WEDNESDAY-DECEMBER-23-2009_6-43_PM_TYG02_8x.ibg

I 18:59:31 Export Successfully Completed!

E 18:59:31 Operation Failed! - Duration: 00:06:53

I 18:59:31 Average Verify Rate: 10,078 KB/s (7.3x) - Maximum Verify Rate: 21,569 KB/s (15.6x)

[mmalves]

What's the brand of the blanks you're using? You could try cleaning the drive with a cleaning disc but I'm not sure if it'd solve the problem