dj_clubber Posted February 13, 2010 Posted February 13, 2010 I 19:26:47 ImgBurn Version 2.5.0.0 started! I 19:26:47 Microsoft Windows 7 Ultimate Edition (6.1, Build 7600) I 19:26:47 Total Physical Memory: 3,144,184 KB - Available: 2,177,592 KB W 19:26:47 SPTD can have a detrimental effect on drive performance. I 19:26:47 Initialising SPTI... I 19:26:47 Searching for SCSI / ATAPI devices... I 19:26:48 Found 2 DVD±RW/RAMs, 1 BD-ROM/HD DVD-ROM and 1 BD-RE! I 19:32:35 Operation Started! I 19:32:35 Building Image Tree... I 19:32:36 Calculating Totals... I 19:32:36 Preparing Image... I 19:32:36 Contents: 1,744 Files, 22 Folders I 19:32:36 Content Type: Data I 19:32:36 Data Type: MODE1/2048 I 19:32:36 File System(s): UDF (1.02) I 19:32:36 Volume Label: [Not Configured] I 19:32:36 Size: 39,260,025,919 bytes I 19:32:36 Sectors: 19,170,922 I 19:32:36 Image Size: 39,266,353,152 bytes I 19:32:36 Image Sectors: 19,173,024 I 19:32:36 Operation Successfully Completed! - Duration: 00:00:00 I 19:32:39 Operation Started! I 19:32:39 Building Image Tree... I 19:32:40 Calculating Totals... I 19:32:40 Preparing Image... I 19:32:41 Contents: 1,744 Files, 22 Folders I 19:32:41 Content Type: Data I 19:32:41 Data Type: MODE1/2048 I 19:32:41 File System(s): UDF (1.02) I 19:32:41 Volume Label: Snatch_(2000) I 19:32:41 Size: 39,260,025,919 bytes I 19:32:41 Sectors: 19,170,922 I 19:32:41 Image Size: 39,266,353,152 bytes I 19:32:41 Image Sectors: 19,173,024 I 19:32:42 Operation Successfully Completed! - Duration: 00:00:03 I 19:32:42 Operation Started! I 19:32:42 Source File: -==/\/[bUILD IMAGE]\/\==- I 19:32:42 Source File Sectors: 19,173,024 (MODE1/2048) I 19:32:42 Source File Size: 39,266,353,152 bytes I 19:32:42 Source File Volume Identifier: Snatch_(2000) I 19:32:42 Source File Application Identifier: ImgBurn v2.5.0.0 I 19:32:42 Source File Implementation Identifier: ImgBurn I 19:32:42 Source File File System(s): UDF (1.02) I 19:32:42 Destination Device: [1:0:0] HL-DT-ST BD-RE BH08LS20 1.00 (I:) (ATA) I 19:32:42 Destination Media Type: BD-R (Disc ID: VERBAT-IMb-00) (Speeds: 2x, 4x) I 19:32:42 Destination Media Sectors: 24,438,784 I 19:32:42 Write Mode: BD I 19:32:42 Write Type: DAO I 19:32:42 Write Speed: MAX I 19:32:42 BD-R Verify Not Required: Yes I 19:32:42 Link Size: Auto I 19:32:42 Lock Volume: Yes I 19:32:42 Test Mode: No I 19:32:42 OPC: No I 19:32:42 BURN-Proof: Enabled I 19:33:04 Filling Buffer... (40 MB) I 19:33:15 Writing LeadIn... W 19:33:29 Failed to Write Sectors 0 - 31 - Reason: Power Calibration Area Error W 19:33:29 Retrying (1 of 20)... W 19:33:44 Retry Failed - Reason: Power Calibration Area Error W 19:33:44 Retrying (2 of 20)... Im trying to burn a disc but it keeps timing out and saying something about power calibration. Any ideas. I tried 2 brands of disc and same problem.
mmalves Posted February 13, 2010 Posted February 13, 2010 I 19:32:42 Destination Device: [1:0:0] HL-DT-ST BD-RE BH08LS20 1.00 (I:) (ATA) Update your burner's firmware then try burning again.
Cynthia Posted February 13, 2010 Posted February 13, 2010 Tried the 2x write speed also? http://www.megaleecher.net/Fix_Power_Calibration_Error
dj_clubber Posted February 13, 2010 Author Posted February 13, 2010 I 20:35:38 ImgBurn Version 2.5.0.0 started! I 20:35:38 Microsoft Windows 7 Ultimate Edition (6.1, Build 7600) I 20:35:38 Total Physical Memory: 3,144,184 KB - Available: 2,207,856 KB W 20:35:38 SPTD can have a detrimental effect on drive performance. I 20:35:38 Initialising SPTI... I 20:35:38 Searching for SCSI / ATAPI devices... I 20:35:39 Found 2 DVD±RW/RAMs, 1 BD-ROM/HD DVD-ROM and 1 BD-RE! I 20:35:48 Operation Started! I 20:35:48 Building Image Tree... I 20:35:49 Calculating Totals... I 20:35:49 Preparing Image... I 20:35:49 Contents: 1,744 Files, 22 Folders I 20:35:49 Content Type: Data I 20:35:49 Data Type: MODE1/2048 I 20:35:49 File System(s): UDF (1.02) I 20:35:49 Volume Label: [Not Configured] I 20:35:49 Size: 39,260,025,919 bytes I 20:35:49 Sectors: 19,170,922 I 20:35:49 Image Size: 39,266,353,152 bytes I 20:35:49 Image Sectors: 19,173,024 I 20:35:49 Operation Successfully Completed! - Duration: 00:00:00 I 20:36:24 Operation Started! I 20:36:24 Building Image Tree... I 20:36:26 Calculating Totals... I 20:36:26 Preparing Image... I 20:36:26 Contents: 1,744 Files, 22 Folders I 20:36:26 Content Type: Data I 20:36:26 Data Type: MODE1/2048 I 20:36:26 File System(s): UDF (1.02) I 20:36:26 Volume Label: Snatch_(2000) I 20:36:26 Size: 39,260,025,919 bytes I 20:36:26 Sectors: 19,170,922 I 20:36:26 Image Size: 39,266,353,152 bytes I 20:36:26 Image Sectors: 19,173,024 I 20:36:30 Operation Successfully Completed! - Duration: 00:00:05 I 20:36:30 Operation Started! I 20:36:30 Source File: -==/\/[bUILD IMAGE]\/\==- I 20:36:30 Source File Sectors: 19,173,024 (MODE1/2048) I 20:36:30 Source File Size: 39,266,353,152 bytes I 20:36:30 Source File Volume Identifier: Snatch_(2000) I 20:36:30 Source File Application Identifier: ImgBurn v2.5.0.0 I 20:36:30 Source File Implementation Identifier: ImgBurn I 20:36:30 Source File File System(s): UDF (1.02) I 20:36:30 Destination Device: [1:0:0] HL-DT-ST BD-RE BH08LS20 2.00 (I:) (ATA) I 20:36:30 Destination Media Type: BD-R (Disc ID: VERBAT-IMb-00) (Speeds: 2x, 4x) I 20:36:30 Destination Media Sectors: 24,438,784 I 20:36:30 Write Mode: BD I 20:36:30 Write Type: DAO I 20:36:30 Write Speed: MAX I 20:36:30 BD-R Verify Not Required: Yes I 20:36:30 Link Size: Auto I 20:36:30 Lock Volume: Yes I 20:36:30 Test Mode: No I 20:36:30 OPC: No I 20:36:30 BURN-Proof: Enabled I 20:36:52 Filling Buffer... (40 MB) I 20:36:53 Writing LeadIn... W 20:37:07 Failed to Write Sectors 0 - 31 - Reason: Power Calibration Area Error W 20:37:07 Retrying (1 of 20)... W 20:37:22 Retry Failed - Reason: Power Calibration Area Error W 20:37:22 Retrying (2 of 20)... W 20:37:36 Retry Failed - Reason: Power Calibration Area Error W 20:37:36 Retrying (3 of 20)... W 20:37:50 Retry Failed - Reason: Power Calibration Area Error W 20:37:50 Retrying (4 of 20)... Tried upgrading firmware done, tried writing at 2x but cant find IMAPI in win 7? Any ideas?
Cynthia Posted February 13, 2010 Posted February 13, 2010 Have you been able to burn Blu-ray with this burner before? You are using quality media so there might be something defective with you burner.
eSkRo Posted February 13, 2010 Posted February 13, 2010 (edited) i think theres no IMAPI for Win 7.... thats probably why u didnt find it... Try a lens cleaner on your burner then burn again... If the above fails, the laser might have died.... sorry Edited February 13, 2010 by eSkRo
dj_clubber Posted February 14, 2010 Author Posted February 14, 2010 Hi Yeah i think the laser died. I tried burning a bluray with another programme and a error code came up and it never burnt. What i dont get is that i can read a bluray with it but it not writing. Its under warranty think so will see if i can get a replacement. I got it off ebay from korea so wish me luck lol. Andrew.
Recommended Posts