Octopus-Prime Posted February 25, 2010 Share Posted February 25, 2010 What do you think of the Dexterix changer? Where can I find more to read about the changer settings? The Guide just says :"not included in guide". I searched the forums but nothing real. The Dexterix guy wrote me this:" Unfortunately I think you would need Imgburn's support for intergrating Dexterix with their software. Their Guide does not provide info on this topic (see "4.3 Changer") at this time. If you can get them having a look on our http://www.dextimus.com/customize.html, they could probably do it quite easily. Bin management would be under Dexterix control for your application, so Imgburn should only issue simple "load" and "unload" commands. To avoid collisions, the trays should open one at a time (don't allow a new drive to open its tray while an other tray is open). The PC/tower case should be under 20cm wide (19cm better). You could probably use a slightly wider case, but it will be difficult to position the robot in order to have access to the bins on both sides. Please keep me informed with your progress and good luck." I want to burn multiple image files in a queue...and i'm used to blowing things up...in mines :pirate: so please help the helpless #39;( Link to comment Share on other sites More sharing options...
Cynthia Posted February 25, 2010 Share Posted February 25, 2010 $890.00 The reason that I've not included it in the guide is that I don't have one of those machines. Link to comment Share on other sites More sharing options...
Octopus-Prime Posted February 25, 2010 Author Share Posted February 25, 2010 $890.00 The reason that I've not included it in the guide is that I don't have one of those machines. Link to comment Share on other sites More sharing options...
Octopus-Prime Posted February 25, 2010 Author Share Posted February 25, 2010 Hello. Do you think it will work? Compared to other changes $890 seems reasonable... I haven't bought it cause if Imgburn can't manage it I'm back to square 1. So I can't see if Image burn will "pick it up" and then let it manage the bin? Do you recommend some other changer? Thank you! Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted February 25, 2010 Share Posted February 25, 2010 Acronova Nimbie unit Supported as of v2.5.1.0. Link to comment Share on other sites More sharing options...
Octopus-Prime Posted February 25, 2010 Author Share Posted February 25, 2010 hie! #39;( do you see the tears in my eyes? its my nuts your squeezing! I thought my screen name was funny, but the joke's on me This Nimbie, it looks like an octopus...its 580% more expensive... I will have to rent extra space just to warehouse the contraption I love Imgburn, how much can I contrabute for you to even consider to include the Dexterix in v2.5.1.0? Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted February 25, 2010 Share Posted February 25, 2010 The NB11 unit is just a small box. I have mine sitting on top of my PC. http://www.acronova.com/duplicator_nimbie_usb.htm It retails for $599 I believe. No I wouldn't support the Dexterix... and to be honest, it looks sh*t! Link to comment Share on other sites More sharing options...
Octopus-Prime Posted February 26, 2010 Author Share Posted February 26, 2010 LIGHTNING UK! I'm sorry to hear you don't want support it. The Nimbie is a turtle compared to the Dexterix. Well you've got a nice program but without the hardware its useless, to me. Thank you for giving me some advice. Link to comment Share on other sites More sharing options...
eSkRo Posted February 26, 2010 Share Posted February 26, 2010 you've got a nice program but without the hardware its useless, to me. you must be joking here Link to comment Share on other sites More sharing options...
Octopus-Prime Posted February 26, 2010 Author Share Posted February 26, 2010 I want to burn 700 different images at a time The little Nimbie will take 4ever! To go to 700 I will need to spend +$5000 compared to $890! The Nimbie (for my application) is slow and expensive. This program is called IMGBURN, duplication towers don't need PCs nor IMGBURN. Here I am offering a real challange and I'm told IMGBURN is for small little Nimbies! I can use PowerIso to burn multiple images too and automate the tray...what's the difference between IMGBURN and PowerISO then? I need help, but what I'm getting is resistance and a "no we only support Nimbies" Its not a joke, its a disaster! Link to comment Share on other sites More sharing options...
Octopus-Prime Posted February 26, 2010 Author Share Posted February 26, 2010 (edited) Hey, I have a new name for Imgburn NIMBIEBURN! Edited February 26, 2010 by Octopus-Prime Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted February 26, 2010 Share Posted February 26, 2010 What on earth are you going on about?! Get them to send me one and I'll support it. Otherwise I really can't be bothered when you're the only person with one and so far you've come across as a bit of a twat. No offence. EDIT: Actually, forget that. You have to talk to the unit over a serial port. When they come out with a DLL to do the job and possibly a USB interface I might consider it. Link to comment Share on other sites More sharing options...
Octopus-Prime Posted February 26, 2010 Author Share Posted February 26, 2010 Appologies for my rude comments. I understand my request is unique and I am very thankfull you are still willing to help under the right circumstances. Again, appologies to You and Nimbie and Dexterix. Thank you. Link to comment Share on other sites More sharing options...
Octopus-Prime Posted March 9, 2010 Author Share Posted March 9, 2010 Hello guys, I've recently had a attitude adjutment and feel great! so refreshed! And! I've fallen in love! with Nimbie I never would have thought I will be getting excited and wait for any software's new release, but I'm waiting for v2.5.1.0 May I please ask how long before? wow I even sound like a child Link to comment Share on other sites More sharing options...
Recommended Posts