roller Posted April 10, 2010 Share Posted April 10, 2010 The following happened during a verify: After the burn: I 19:11:58 Cycling Tray before Verify... W 19:13:30 Waiting for device to become ready... W 19:13:31 Device Not Ready - Tracking Servo Failure W 19:13:31 Retrying (1 of 3)... I 19:13:31 Cycling Tray before Verify... W 19:15:38 Waiting for device to become ready... W 19:15:39 Retry Failed - Reason: Tracking Servo Failure W 19:15:39 Retrying (2 of 3)... I 19:15:39 Cycling Tray before Verify... I 19:16:22 Device Ready! Ok.. but after a little while... W 19:18:48 Failed to Read Sector 0 - Reason: Logical Block Address out of Range W 19:19:20 Retrying (1)... W 19:19:21 Retry Failed - Reason: Logical Block Address out of Range W 19:19:28 Retrying (2)... W 19:19:29 Retry Failed - Reason: Logical Block Address out of Range E 19:19:31 Failed to Read Sector 0 - Reason: Logical Block Address out of Range E 19:19:31 Failed to Verify Sectors! --- Also my drive has been having trouble reading certain disks lately. Link to comment Share on other sites More sharing options...
mmalves Posted April 10, 2010 Share Posted April 10, 2010 Post the whole log of that burning session. Link to comment Share on other sites More sharing options...
eSkRo Posted April 10, 2010 Share Posted April 10, 2010 Make sure you include a copy of the program's log in your post. No log = Link to comment Share on other sites More sharing options...
roller Posted April 10, 2010 Author Share Posted April 10, 2010 OK here is the entire log: ; //****************************************\\ ; ImgBurn Version 2.5.1.0 - Log ; Friday, 09 April 2010, 19:56:40 ; \\****************************************// ; ; I 18:51:22 ImgBurn Version 2.5.1.0 started! I 18:51:22 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7600) I 18:51:22 Total Physical Memory: 4,192,808 KB - Available: 2,694,440 KB I 18:51:22 Initialising SPTI... I 18:51:22 Searching for SCSI / ATAPI devices... I 18:51:22 -> Drive 1 - Info: ELBY CLONEDRIVE 1.4 (K:) (SCSI) I 18:51:22 -> Drive 2 - Info: PLEXTOR DVDR PX-755A 1.08 (E:) (ATA) I 18:51:22 Found 1 DVD±RW and 1 BD-ROM/HD DVD-ROM! I 18:53:37 Operation Started! I 18:53:37 Source File: D:\source.dvd I 18:53:37 Source File Sectors: 3,827,488 (MODE1/2048) I 18:53:37 Source File Size: 7,838,695,424 bytes I 18:53:37 Source File Volume Identifier: DVD_ROM I 18:53:37 Source File Volume Set Identifier: ec67c000MS UDFBridge I 18:53:37 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 18:53:37 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 18:53:37 Source File File System(s): ISO9660, UDF (1.50) I 18:53:37 Destination Device: [6:0:0] PLEXTOR DVDR PX-755A 1.08 (E:) (ATA) I 18:53:37 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x, 6x) I 18:53:37 Destination Media Sectors: 4,173,824 I 18:53:37 Write Mode: DVD I 18:53:37 Write Type: DAO I 18:53:37 Write Speed: MAX I 18:53:37 Link Size: Auto I 18:53:37 Lock Volume: Yes I 18:53:37 Test Mode: No I 18:53:37 OPC: Yes I 18:53:37 BURN-Proof: Enabled I 18:53:37 Write Speed Successfully Set! - Effective: 8,310 KB/s (6x) I 18:53:37 Book Type Setting: DVD-ROM I 18:53:37 Advanced Settings - AutoStrategy: Auto, PowerRec: Yes I 18:54:29 Optimal L0 Data Zone Capacity: 1,913,760 I 18:54:29 Optimal L0 Data Zone Method: Copied From Original Disc I 18:54:29 Set L0 Data Zone Capacity Succeeded! I 18:54:30 Filling Buffer... (40 MB) I 18:54:31 Writing LeadIn... I 18:54:47 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 18:54:47 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 18:54:47 Writing Layer 0... (LBA: 0 - 1913759) I 19:03:09 Writing Layer 1... (LBA: 1913760 - 3827487) I 19:11:10 Synchronising Cache... I 19:11:13 Closing Track... I 19:11:15 Finalising Disc... I 19:11:58 Exporting Graph Data... I 19:11:58 Graph Data File: C:\Users\Roller\AppData\Roaming\ImgBurn\Graph Data Files\PLEXTOR_DVDR_PX-755A_1.08_FRIDAY-APRIL-09-2010_6-53_PM_MKM-001-00_MAX.ibg I 19:11:58 Export Successfully Completed! I 19:11:58 Operation Successfully Completed! - Duration: 00:18:19 I 19:11:58 Average Write Rate: 7,795 KB/s (5.6x) - Maximum Write Rate: 8,394 KB/s (6.1x) I 19:11:58 Cycling Tray before Verify... W 19:13:30 Waiting for device to become ready... W 19:13:31 Device Not Ready - Tracking Servo Failure W 19:13:31 Retrying (1 of 3)... I 19:13:31 Cycling Tray before Verify... W 19:15:38 Waiting for device to become ready... W 19:15:39 Retry Failed - Reason: Tracking Servo Failure W 19:15:39 Retrying (2 of 3)... I 19:15:39 Cycling Tray before Verify... I 19:16:22 Device Ready! I 19:18:34 Operation Started! I 19:18:34 Source Device: [6:0:0] PLEXTOR DVDR PX-755A 1.08 (E:) (ATA) I 19:18:34 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x, 6x) I 19:18:34 Image File: D:\s-scc.dvd I 19:18:34 Image File Sectors: 3,827,488 (MODE1/2048) I 19:18:34 Image File Size: 7,838,695,424 bytes I 19:18:34 Image File Volume Identifier: DVD_ROM I 19:18:34 Image File Volume Set Identifier: ec67c000MS UDFBridge I 19:18:34 Image File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 19:18:34 Image File Implementation Identifier: Microsoft CDIMAGE UDF I 19:18:34 Image File File System(s): ISO9660, UDF (1.50) I 19:18:34 Read Speed (Data/Audio): MAX / MAX I 19:18:34 Verifying Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 19:18:34 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 19:18:34 Verifying Layer 0... (LBA: 0 - 1913759) W 19:18:48 Failed to Read Sector 0 - Reason: Logical Block Address out of Range W 19:19:20 Retrying (1)... W 19:19:21 Retry Failed - Reason: Logical Block Address out of Range W 19:19:28 Retrying (2)... W 19:19:29 Retry Failed - Reason: Logical Block Address out of Range E 19:19:31 Failed to Read Sector 0 - Reason: Logical Block Address out of Range E 19:19:31 Failed to Verify Sectors! I 19:19:31 Exporting Graph Data... I 19:19:31 Graph Data File: C:\Users\Roller\AppData\Roaming\ImgBurn\Graph Data Files\PLEXTOR_DVDR_PX-755A_1.08_FRIDAY-APRIL-09-2010_6-53_PM_MKM-001-00_MAX.ibg I 19:19:31 Export Successfully Completed! E 19:19:31 Operation Failed! - Duration: 00:00:57 I 19:19:31 Average Verify Rate: N/A - Maximum Verify Rate: N/A I 19:56:39 Close Request Acknowledged I 19:56:39 Closing Down... I 19:56:40 Shutting down SPTI... I 19:56:40 ImgBurn closed! Link to comment Share on other sites More sharing options...
mmalves Posted April 10, 2010 Share Posted April 10, 2010 I 18:53:37 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x, 6x)I 18:53:37 Write Speed: MAX Try a lens cleaning disc on your burner. Try the other available write speeds. Link to comment Share on other sites More sharing options...
dontasciime Posted April 10, 2010 Share Posted April 10, 2010 Also try changing IDE cable as last resort use an 80 wire one Link to comment Share on other sites More sharing options...
roller Posted April 11, 2010 Author Share Posted April 11, 2010 I 18:53:37 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x, 6x)I 18:53:37 Write Speed: MAX Try a lens cleaning disc on your burner. Try the other available write speeds. I will try a lens cleaner.. but the burn was fine. The failure was during verify. Also try changing IDE cable as last resort use an 80 wire one It is a SATA drive. Link to comment Share on other sites More sharing options...
dontasciime Posted April 11, 2010 Share Posted April 11, 2010 I thought it was but when I searched on Google it said it was IDE As I was going to tell you to change the SATA cable but figured after typing it you would tell me you drive was an IDE one :lol Anyways change the sata cable after cleaning lens Link to comment Share on other sites More sharing options...
Recommended Posts