ironmanDD Posted May 4, 2010 Share Posted May 4, 2010 I've burned thousands of movies, and now all of a sudden I cant burn any iso's... Buffer and Device Buffer stay at 100%, but the write rate goes up to 2.4x for a few seconds, then down to zero... then up to 2.4x, then back to zero again... it repeats this throughout the entire burn, and finally after about an hour it "successfully" completes the burn, but the dvd will not work in any player... I've tried reinstalling imgburn, various write speeds, and increasing the buffer size... nothing works.. however it works perfectly fine when I run in test mode. My computer is brand new, and never had a problem like this before, any ideas? Thanks in advance Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted May 4, 2010 Share Posted May 4, 2010 Upload the IBG file from such a burn - or open it yourself in one of the supported programs and post a screenshot. If the buffers are full and test mode is ok, it would suggest it's an issue between your drive and the media you're using. Post a log next time please - as per the pink box up the top Link to comment Share on other sites More sharing options...
ironmanDD Posted May 5, 2010 Author Share Posted May 5, 2010 (edited) Upload the IBG file from such a burn - or open it yourself in one of the supported programs and post a screenshot. If the buffers are full and test mode is ok, it would suggest it's an issue between your drive and the media you're using. Post a log next time please - as per the pink box up the top I 17:17:37 ImgBurn Version 2.5.1.0 started! I 17:17:37 Microsoft Windows 7 Home Premium x64 Edition (6.1, Build 7600) I 17:17:37 Total Physical Memory: 3,931,312 KB - Available: 2,797,444 KB I 17:17:37 Initialising SPTI... I 17:17:37 Searching for SCSI / ATAPI devices... I 17:17:37 -> Drive 1 - Info: hp CDDVDW TS-T633L 1D00 (E:) (ATA) I 17:17:37 Found 1 DVD±RW/RAM! I 17:32:57 Operation Started! I 17:32:57 Source File: G:\Movies\rep-avatar.iso I 17:32:57 Source File Sectors: 2,292,735 (MODE1/2048) I 17:32:57 Source File Size: 4,695,521,280 bytes I 17:32:57 Source File Volume Identifier: AVATAR I 17:32:57 Source File Volume Set Identifier: 4BC542F10000000F I 17:32:57 Source File Application Identifier: MKISOFS ISO 9660/HFS FILESYSTEM BUILDER & CDRECORD CD-R/DVD CREATOR © 1993 E.YOUNGDALE © 1997 J.PEARSON/J.SCHILLING I 17:32:57 Source File Implementation Identifier: mkisofs I 17:32:57 Source File File System(s): ISO9660, UDF (1.02) I 17:32:57 Destination Device: [0:2:0] hp CDDVDW TS-T633L 1D00 (E:) (ATA) I 17:32:57 Destination Media Type: DVD-R (Disc ID: RITEKF1) (Speeds: 3x, 4x, 6x, 8x) I 17:32:57 Destination Media Sectors: 2,298,496 I 17:32:57 Write Mode: DVD I 17:32:57 Write Type: DAO I 17:32:57 Write Speed: 4x I 17:32:58 Link Size: Auto I 17:32:58 Lock Volume: Yes I 17:32:58 Test Mode: No I 17:32:58 OPC: No I 17:32:58 BURN-Proof: Enabled I 17:32:58 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x) I 17:32:58 Filling Buffer... (40 MB) I 17:32:59 Writing LeadIn... I 17:33:39 Writing Session 1 of 1... (1 Track, LBA: 0 - 2292734) I 17:33:39 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 2292734) I 18:50:25 Synchronising Cache... I 18:50:50 Exporting Graph Data... I 18:50:50 Graph Data File: C:\Users\Amanda\AppData\Roaming\ImgBurn\Graph Data Files\hp_CDDVDW_TS-T633L_1D00_MAY-04-10_5-32_PM_RITEKF1_4x.ibg I 18:50:50 Export Successfully Completed! I 18:50:50 Operation Successfully Completed! - Duration: 01:17:52 I 18:50:50 Average Write Rate: 995 KB/s (0.7x) - Maximum Write Rate: 5,600 KB/s (4.0x) Edited May 5, 2010 by ironmanDD Link to comment Share on other sites More sharing options...
ironmanDD Posted May 20, 2010 Author Share Posted May 20, 2010 Any ideas? I can burn with other software with no problems so I dont think its the media or the drive... Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted May 20, 2010 Share Posted May 20, 2010 It burnt ok but you didn't verify so there's no way of knowing if the drive did an ok job of burning the disc. Link to comment Share on other sites More sharing options...
ironmanDD Posted May 20, 2010 Author Share Posted May 20, 2010 Well I cant burn with imgburn, but I can with other software and completes perfectly fine and works in my dvd player.. thats good enough for me... Also, I can still burn DL dvds, but still cant burn iso to dvdr.. this is something that just started for some reason.. I use to burn the exact same media in the exact same drive and never had a problem.. I dont get it.. Link to comment Share on other sites More sharing options...
Recommended Posts