Grain Posted June 5, 2006 Posted June 5, 2006 Had a couple stop errors happen so far on my new computer. First was when I was trying out Far Cry, but I had every setting cranked, and I thought at the time it was probably just an unstable setting on the game. But I just had it happen now, and Microsoft has no idea. When it goes, it just goes black, no BSD, fans all speed up like they do when coming out of low power/heat setting. And she restarts. Cock. Error caused by a device driver Thank you for sending an error report to Microsoft. Error report summary Error type : Windows stop error (A message appears on a blue screen with error code information) Solution available? : No (see Next steps) What does this error mean? : Windows has encountered an error from which it cannot recover and needs to restart Cause : Unknown device driver Computer symptoms : A message appears on a blue screen with error code information (for example: e.g. 0x0000001E, KMODE_EXCEPTION_NOT_HANDLED) Additional steps for you to take : Important: Please continue to send error reports so analysts at Microsoft can study and try to correct the problem as quickly as possible Information about this error You received this message because a device driver installed on your computer caused the Windows operating system to stop unexpectedly. This type of error is referred to as a "stop error." A stop error requires you to restart your computer. Next steps We have analyzed your error report and at this time are unable to determine the exact cause of the error. However, Microsoft will continue to analyze this error report to try to determine the specific cause of the error. If we are able to find the cause and correct it, and you encounter the same problem, you will receive an updated response that includes instructions for resolving the problem.
kevdriver Posted June 5, 2006 Posted June 5, 2006 Grain, this is going to sound so lame but what size power supply do you have in her. I'm sure its adequate if you built her yourself but I had the same symptoms a few months back and after much friging around bought a new PSU and everything operated normally again. This is just a stab in the dark to try to help you out. I received the same response from microsoft after sending them the error report, used safe mode to start everything one by one and that did no good. Assumed no device driver conflict, thats when I went the route of PSU. Yours being brand new though................ unless its a faulty power supplu unit.........
Grain Posted June 5, 2006 Author Posted June 5, 2006 It's a 620 watt Enermax, so that should be more than enough. Possibly faulty though. I'll have to find a good fan speed and current output monitor software of some sort. Asus always has a decent PCProb with their MB's, MSI doesn't seem to have it.
kevdriver Posted June 5, 2006 Posted June 5, 2006 It's a 620 watt Enermax, so that should be more than enough. Possibly faulty though. I'll have to find a good fan speed and current output monitor software of some sort. Asus always has a decent PCProb with their MB's, MSI doesn't seem to have it. Grain: http://www.almico.com/speedfan.php http://www.cpuid.com/pcwizard.php Maybe thesae two apps are what you're looking for.
dbminter Posted June 5, 2006 Posted June 5, 2006 Hey, I kid you not! Pain_Man can back me up. I actually received an error dialog window that said: "Error The operation completed successfully."
LIGHTNING UK! Posted June 5, 2006 Posted June 5, 2006 Check and see if you're getting minidump files in c:\windows\minidumps. If you are, you can analyse them with Microsoft's debug utility. You can also try messing with the Dr Watson program (drwtsn32.exe) to get some additional debug info.
Grain Posted June 5, 2006 Author Posted June 5, 2006 Got 3 files in the minidump folder, Doc Watson doesn't give any info on them though. Where can I find Microsofts debug program?
kevdriver Posted June 5, 2006 Posted June 5, 2006 http://thestarman.dan123.com/asm/debug/debug.htm#NT Grain, does this help?
LIGHTNING UK! Posted June 5, 2006 Posted June 5, 2006 This is the one you want: http://www.microsoft.com/whdc/devtools/deb...ng/default.mspx
chewy Posted June 5, 2006 Posted June 5, 2006 grain, post an everest overclock report quick txt http://www.majorgeeks.com/download4181.html --------[ EVEREST Home Edition © 2003-2005 Lavalys, Inc. ]------------------------------------------------------------ Version EVEREST v2.20.405 Homepage http://www.lavalys.com/ Report Type Quick Report Computer HOME-A4BAC1C55B (beast) Generator bob Operating System Microsoft Windows XP Professional 5.1.2600 (WinXP Retail) Date 2006-06-05 Time 15:29 --------[ Overclock ]--------------------------------------------------------------------------------------------------- CPU Properties: CPU Type AMD Athlon 64 CPU Alias Venice S939 CPU Stepping DH-E3 CPUID CPU Name AMD Athlon 64 Processor 3000+ CPUID Revision 00020FF0h CPU Speed: CPU Clock 2519.62 MHz CPU Multiplier 9.0x CPU FSB 279.96 MHz (original: 200 MHz, overclock: 40%) Memory Bus 251.96 MHz CPU Cache: L1 Code Cache 64 KB (Parity) L1 Data Cache 64 KB (ECC) L2 Cache 512 KB (On-Die, ECC, Full-Speed) Motherboard Properties: Motherboard ID 63-1408-000001-00101111-063005-K8T800P$A0036001_BIOS DATE: 06/30/05 17:34:14 VER: 08.00.09 Motherboard Name Asus A8V Deluxe (5 PCI, 1 AGP, 4 DDR DIMM, Audio, Gigabit LAN, IEEE-1394) Chipset Properties: Motherboard Chipset VIA K8T800Pro, AMD Hammer Memory Timings 2.5-4-4-10 (CL-RCD-RP-RAS) Command Rate (CR) 1T SPD Memory Modules: DIMM1: Micron Tech. 256 MB PC4000 DDR SDRAM (2.5-4-4-10 @ 250 MHz) (2.0-3-3-8 @ 200 MHz) DIMM2: Micron Tech. 256 MB PC4000 DDR SDRAM (2.5-4-4-10 @ 250 MHz) (2.0-3-3-8 @ 200 MHz) BIOS Properties: System BIOS Date 06/30/05 Video BIOS Date 04/08/11 DMI BIOS Version 1014.008 Graphics Processor Properties: Video Adapter ATI Radeon 9600 XT (RV360) GPU Code Name RV360 (AGP 8x 1002 / 4152, Rev 00) GPU Clock 500 MHz (original: 500 MHz) Memory Clock 297 MHz (original: 300 MHz)
Grain Posted June 6, 2006 Author Posted June 6, 2006 Installed the latest video driver and found a utility at MSI's site that monitors the fans and psu output, the generic ones could give me any info for some reason. One could give the HDD temp and that was it. Kind of neat, but not crucial. Downloading the Windows DeBug Utility now, OH! Goody! A dual core processsor and it still takes 1.5 hours to download a 12MB file "Your only as fast as your slowest component". Fuck.
kevdriver Posted June 6, 2006 Posted June 6, 2006 Are you still on dial up mate ?? tryed to phone Grain, just keep getting a busy signal, must be downloading something big...............
lfcrule1972 Posted June 6, 2006 Posted June 6, 2006 I installed a PC for my wife's friend last week - they only have dialup so it pissed on me d/l a prog from Zonelabs - reckoned it was gonna take 2.5 hours !!! I came back to ours, grabbed it via Broadband, burnt it to a CD-RW and went back to theirs, installed it and got it set up in 30 mins !!!
Grain Posted June 6, 2006 Author Posted June 6, 2006 Can get hi-speed now, but need to buy $500 worth of hardware first. Will likely do it sooner rather than later though.
lfcrule1972 Posted June 6, 2006 Posted June 6, 2006 Christ !! Our hardware required for Broadband is all free here.........
Shamus_McFartfinger Posted June 6, 2006 Posted June 6, 2006 Can get hi-speed now, but need to buy $500 worth of hardware first. Will likely do it sooner rather than later though. $500? Unless you're getting some whizzbang new fangled connection with state of the art hardware that's bundled with other services like cable tv, mobile phone or landline deals, I think they're pullin' yer puddin'. An ADSL modem/4-port router is only worth 50 bucks these days, less in US dollars. What sort of hardware are you looking at?
kevdriver Posted June 6, 2006 Posted June 6, 2006 500 bills, christ Grain. 25$ for a ethernet card, modem should be free or else just a small charge on your phone/cable bill, router 50$. All filters for phones usually come with modem. I'm on Bell Sympatico Ultra High Speed 65$ a month/ approx. WoW do they ever soak you down in your neck of Canada.
Grain Posted June 7, 2006 Author Posted June 7, 2006 I'm on an farm, and DSL, cable etc is not available yet, apparently putting in fibre optic cable, but that's years off IMO. I live less than an hour from a city of a million people, yet no broadband available, WTF? My only options so far are satellite or what I mentioned earlier. That's from a tower nearby that broadcast's the stream through the airwaves within a certain distance. You need to use a specific 900, 2.4 or 5.8MHZ receiver/broadcaster to get it (depending how far from the tower you are), which is where the 500 bills comes from. This tower was stricktly for the local booming oil business, but now have apparently aquired enough bandwidth to less to the local folk. They have the usual claim, "up to" 400mbps for the regular, 800 for the business package. One is 50 per month, the other 90ish, very rich.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now