noone Posted July 24, 2010 Share Posted July 24, 2010 My first time here, hello to everyone. I have a SONY DRU-V200A DVD Burner. I've used Image Burner in the past successfully, but now I'm getting this error after upgrading to Ver 2.5.1.0. The DVD blanks are Phillips CD-R 52X media. I also tried some TDK 48X, I've had stored in a cabinet for a number of years, same issue. Funny thing, my Nero 9 has no issues with burning on either media. Anyone have any ideas? Thank-you Link to comment Share on other sites More sharing options...
Cynthia Posted July 24, 2010 Share Posted July 24, 2010 Can you switch to read mode and insert a blanc disc and then post the disc info in the right window panel? Link to comment Share on other sites More sharing options...
noone Posted July 25, 2010 Author Share Posted July 25, 2010 Can you switch to read mode and insert a blanc disc and then post the disc info in the right window panel? SONY DVD RW DRU-V200A 1.60 (ATA) Current Profile: CD-R Disc Information: Status: Unknown State of Last Session: Unknown Erasable: Unknown Formatted: Unknown Sessions: Unknown ATIP Information: Disc ID: 97m26s66f Manufacturer: CMC Magnetics Corp. Start Time of LeadIn: 97m26s66f Last Possible Start Time of LeadOut: 79m59s71f Link to comment Share on other sites More sharing options...
noone Posted July 25, 2010 Author Share Posted July 25, 2010 Can you switch to read mode and insert a blanc disc and then post the disc info in the right window panel? Here's from a DVD SONY DVD RW DRU-V200A 1.60 (ATA) Current Profile: DVD-R Disc Information: Status: Unknown State of Last Session: Unknown Erasable: Unknown Formatted: Unknown Sessions: Unknown Pre-recorded Information: Manufacturer ID: CMC MAG. AM3 Physical Format Information (Last Recorded): Disc ID: 0@P-!-00 Book Type: DVD-R Part Version: 5 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 1 Track Path: Parallel Track Path (PTP) Linear Density: 0.267 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 2,495,103 Last Physical Sector in Layer 0: 0 Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted July 25, 2010 Share Posted July 25, 2010 Load the program with no disc in the drive, go into Read mode, press the F8 key, insert a problem disc. When the status bar says the disc isn't empty, press F8 again and click 'File' -> 'Save As' from within the Log window. Save it to a file and upload that file here on the forum. Basically, all that 'unknown' info is what's causing the problem - and there must be a reason for it all being 'unknown' (i.e. something isn't right with your drive/machine). Link to comment Share on other sites More sharing options...
noone Posted July 25, 2010 Author Share Posted July 25, 2010 Here are two logs. Each one was done after a reboot. Curiously, if I select "Read" mode it says the "Disc is Empty". Selecting "Write" mode, it says "The disc is not Empty". I may have a spare CD/DVD drive somewhere, I'll go look for it. Thanks, Louis ImgBurn 7-25-2010-01.log ImgBurn 7-25-2010-02.log Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted July 25, 2010 Share Posted July 25, 2010 I 15:04:12 CDB Interpretation: Read Disc InformationE 15:04:12 SENSE: 00 00 00 05 00 00 00 00 00 00 00 00 FF FF E 15:04:12 SENSE Interpretation: Access is denied. I 15:04:12 [0:1:0] SONY DVD RW DRU-V200A 1.60 (D:) (ATA) I 15:04:12 CDB: 52 01 00 00 00 01 00 00 30 00 I 15:04:12 CDB Interpretation: Read Track Information E 15:04:12 SENSE: 00 00 00 05 00 00 00 00 00 00 00 00 FF FF E 15:04:12 SENSE Interpretation: Access is denied. Wow, never seen that before! The OS (or some filter driver) is rejecting the commands. What do you have in your filter drivers list? (Copy + paste via the feature in the Tools menu) Link to comment Share on other sites More sharing options...
noone Posted July 26, 2010 Author Share Posted July 26, 2010 I 15:04:12 CDB Interpretation: Read Disc InformationE 15:04:12 SENSE: 00 00 00 05 00 00 00 00 00 00 00 00 FF FF E 15:04:12 SENSE Interpretation: Access is denied. I 15:04:12 [0:1:0] SONY DVD RW DRU-V200A 1.60 (D:) (ATA) I 15:04:12 CDB: 52 01 00 00 00 01 00 00 30 00 I 15:04:12 CDB Interpretation: Read Track Information E 15:04:12 SENSE: 00 00 00 05 00 00 00 00 00 00 00 00 FF FF E 15:04:12 SENSE Interpretation: Access is denied. Wow, never seen that before! The OS (or some filter driver) is rejecting the commands. What do you have in your filter drivers list? (Copy + paste via the feature in the Tools menu) Link to comment Share on other sites More sharing options...
noone Posted July 26, 2010 Author Share Posted July 26, 2010 =============================================== Filter Driver Load Order - ImgBurn v2.5.1.0 =============================================== Upper Device Filter: redbook Upper Class Filter: [None Found] Device: CD/DVD-ROM Device Lower Class Filter: PxHelp20 Lower Device Filter: imapi Filter Name: redbook File Name: C:\WINDOWS\System32\DRIVERS\redbook.sys File Version: 5.1.2600.5512 (xpsp.080413-2108) File Description: Redbook Audio Filter Driver Product Name: Microsoft® Windows® Operating System Product Version: 5.1.2600.5512 Company Name: Microsoft Corporation Copyright: © Microsoft Corporation. All rights reserved. Filter Name: PxHelp20 File Name: C:\WINDOWS\System32\Drivers\PxHelp20.sys File Version: 3.00.83a [3.0.83.0] File Description: Px Engine Device Driver for Windows 2000/XP Product Name: PxHelp20 Product Version: [2.0.0.0] Company Name: Sonic Solutions Copyright: Copyright © Sonic Solutions Filter Name: imapi File Name: C:\WINDOWS\system32\DRIVERS\imapi.sys File Version: 5.1.2600.5512 (xpsp.080413-2108) File Description: IMAPI Kernel Driver Product Name: Microsoft® Windows® Operating System Product Version: 5.1.2600.5512 Company Name: Microsoft Corporation Copyright: © Microsoft Corporation. All rights reserved. Link to comment Share on other sites More sharing options...
Recommended Posts