thethreedwarves Posted July 28, 2010 Share Posted July 28, 2010 (edited) Hi, I am trying to burn an .iso onto a dual layer dvd. Whenever I attempt to do this the write speed is constantly at about 4x no matter what I set it to. I need to reduce the burn speed since bits of the move are laggy and around the change over 2 whole scenes (out of 14) won't play at all. The most relevant line from the log (as far as i can tell) is: Write Speed Miscompare! - Wanted 1,385 KB/s (1x), Got: 5540 KB/s (4x) this is after setting it to 1x. Any help would be greatly appreciated. here is the log: I 16:15:37 ImgBurn Version 2.5.1.0 started! I 16:15:37 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7600) I 16:15:37 Total Physical Memory: 4,192,760 KB - Available: 2,916,824 KB I 16:15:37 Initialising SPTI... I 16:15:37 Searching for SCSI / ATAPI devices... I 16:15:37 -> Drive 1 - Info: TSSTcorp CDDVDW SH-S203N SB00 (K:) (ATA) I 16:15:37 Found 1 DVD±RW/RAM! I 16:31:24 Operation Started! I 16:31:24 Source File: J:\My Videos\DVD\The Hurt Locker.MDS I 16:31:24 Source File Sectors: 3,844,253 (MODE1/2048) I 16:31:24 Source File Size: 7,873,030,144 bytes I 16:31:24 Source File Volume Identifier: HURT_LOCKER I 16:31:24 Source File Volume Set Identifier: 3b6b63d2 I 16:31:24 Source File Implementation Identifier: Sonic Scenarist 3.1 I 16:31:24 Source File File System(s): ISO9660, UDF (1.02) I 16:31:24 Destination Device: [3:0:0] TSSTcorp CDDVDW SH-S203N SB00 (K:) (ATA) I 16:31:24 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 4x, 6x, 8x) I 16:31:24 Destination Media Sectors: 4,173,824 I 16:31:24 Write Mode: DVD I 16:31:24 Write Type: DAO I 16:31:24 Write Speed: 1x I 16:31:24 Link Size: Auto I 16:31:24 Lock Volume: Yes I 16:31:24 Test Mode: No I 16:31:24 OPC: No I 16:31:24 BURN-Proof: Enabled W 16:31:25 Write Speed Miscompare! - Wanted: 1,385 KB/s (1x), Got: 5,540 KB/s (4x) I 16:31:25 Book Type Setting: DVD-ROM I 16:31:25 Optimal L0 Data Zone Capacity: 1,952,992 I 16:31:25 Optimal L0 Data Zone Method: Copied From Original Disc I 16:32:09 Set L0 Data Zone Capacity Succeeded! I 16:32:09 Filling Buffer... (40 MB) I 16:32:10 Writing LeadIn... I 16:32:12 Writing Session 1 of 1... (1 Track, LBA: 0 - 3844252) I 16:32:12 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3844252) I 16:32:12 Writing Layer 0... (LBA: 0 - 1952991) I 16:44:19 Writing Layer 1... (LBA: 1952992 - 3844252) (will post the last bit in a min - trying a second time) Edited July 28, 2010 by thethreedwarves Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted July 28, 2010 Share Posted July 28, 2010 I 16:31:24 Destination Device: [3:0:0] TSSTcorp CDDVDW SH-S203N SB00 (K:) (ATA)I 16:31:24 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 4x, 6x, 8x) The bits in bold are the speeds your drive/firmware support the 'RICOHJPN-D01-67' dye at. Supported write speeds are always shown in the disc info panel on the right when there's a disc in the drive. 2.4x is the lowest speed the DVD+ (plus) format ever supported so 1x wouldn't really be an option on *any* drive. You should update the firmware on your drive to SB02. http://www.firmwarehq.com/Samsung/SH-S203N/files.html Link to comment Share on other sites More sharing options...
thethreedwarves Posted July 28, 2010 Author Share Posted July 28, 2010 Thanks for the reply. I have updated the firmware and am trying again, however it still will not burn at any lower than 4x, guess I will just have to live with that. I don't expect it will burn properly this time either, however will post the results. Thanks for trying! Link to comment Share on other sites More sharing options...
grullone Posted January 26, 2012 Share Posted January 26, 2012 I 16:31:24 Destination Device: [3:0:0] TSSTcorp CDDVDW SH-S203N SB00 (K:) (ATA)I 16:31:24 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 4x, 6x, 8x) The bits in bold are the speeds your drive/firmware support the 'RICOHJPN-D01-67' dye at. Supported write speeds are always shown in the disc info panel on the right when there's a disc in the drive. 2.4x is the lowest speed the DVD+ (plus) format ever supported so 1x wouldn't really be an option on *any* drive. You should update the firmware on your drive to SB02. http://www.firmwarehq.com/Samsung/SH-S203N/files.html I am having the same trouble with ASUS DRW-22B2L and I wasted a lot od DVD+R DL cause I can't write them with speed less than 4 do you think it will be possible write slowly. Here my log Thank you in advance log-for-nav.txt Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted January 26, 2012 Share Posted January 26, 2012 We don't do thread hijacking here. Make your own new thread please - as per the instructions in the pink box up the top. Link to comment Share on other sites More sharing options...
Recommended Posts