dovedescent7 Posted September 11, 2010 Share Posted September 11, 2010 Well this topic was origanlly posted in The multiavchd forums,but this is decidedly more appropriate for this website...By the way i am new,thank you for having me.. win7 64 Ult been able to burn dual layers before,and now i cant.DOnt think its my media as ive tried first with these cheap kodak dual layers (one actually worked!) and then of course went and got some verbatim 8.5 dl's and still didnt work Looks by this log that its not burning layer #2 ? Im using the newest version of imgburn. Ive got these beautiful 8gb iso avchd files (ABOUT TEN),that are making coasters out of my expensive discs. First tried just opening the usual way,mds, and did a burn. 1 out of ten worked on this kodak media.Keep in mind this was over a 3 day period,and i have installed many things over this time,including daemon tools (hate it),and virtualdiscdrive for obvious reasons.BTW while i was downloading one of those, i was asked to install some sort of win7 patch or windows patch or dll for campatibility for 2.5 or udf i forget what it was... Either way,these things werent buirning right before and after the installs,only now i dont know if its the pc or the media,because of the variables involved now..anyways,i got like poweriso and extracted the files,and ran the m2ts through multiavchd then it opened imgburn and i burned another one and still its showing up as unsopprted on my blu ray... By the way,ive burnt about 200 of these on the regular dvd's SINGLE LAYER no problem.they work fine.but im thinking something happened recently that made it so i cannot burn these... Here is the IMGBURN LOG..... Please help me..this has been going on for days... im so frustrated Looks to me like its not burning layer #2? I 12:47:21 ImgBurn Version 2.5.1.0 started! I 12:47:21 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7600) I 12:47:21 Total Physical Memory: 3,145,272 KB - Available: 1,648,928 KB W 12:47:21 Duplex Secure's SPTD driver can have a detrimental effect on drive performance. I 12:47:21 Initialising SPTI... I 12:47:21 Searching for SCSI / ATAPI devices... I 12:47:21 -> Drive 1 - Info: ATAPI DVD A DH16A1S HA11 (D:) (ATA) I 12:47:22 -> Drive 2 - Info: Slimtype DVD A DS8A3S HP53 (K:) (USB) I 12:47:22 Found 2 DVD±RW/RAMs! I 12:48:25 Operation Started! I 12:48:25 Source File: H:\ALL UTORRENT DOWNLOADS\My uncopyrighted movie. BR.1080P.Menus.and.Extras.AC3.5.1.AVCHD-JVS\My_uncopyrighted_movie.MDS I 12:48:25 Source File Sectors: 3,936,096 (MODE1/2048) I 12:48:25 Source File Size: 8,061,124,608 bytes I 12:48:25 Source File Volume Identifier: My_uncopyrighted_movie I 12:48:25 Source File Volume Set Identifier: 3C378C02003C0858 I 12:48:25 Source File Application Identifier: ImgBurn v2.5.0.0 I 12:48:25 Source File Implementation Identifier: ImgBurn I 12:48:25 Source File File System(s): UDF (2.50) I 12:48:25 Destination Device: [0:0:0] Slimtype DVD A DS8A3S HP53 (K:) (USB) I 12:48:25 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 3x, 4x, 6x) I 12:48:25 Destination Media Sectors: 4,173,824 I 12:48:25 Write Mode: DVD I 12:48:25 Write Type: DAO I 12:48:25 Write Speed: 2.4x I 12:48:25 Link Size: Auto I 12:48:25 Lock Volume: Yes I 12:48:25 Test Mode: No I 12:48:25 OPC: No I 12:48:25 BURN-Proof: Enabled W 12:48:25 Write Speed Miscompare! - Wanted: 3,324 KB/s (2.4x), Got: 4,155 KB/s (3x) I 12:48:25 Book Type Setting: DVD-ROM I 12:48:25 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes I 12:48:25 Optimal L0 Data Zone Capacity: 1,968,048 I 12:48:25 Optimal L0 Data Zone Method: Copied From Original Disc I 12:48:45 Set L0 Data Zone Capacity Succeeded! I 12:48:45 Filling Buffer... (40 MB) I 12:48:46 Writing LeadIn... I 12:48:47 Writing Session 1 of 1... (1 Track, LBA: 0 - 3936095) I 12:48:47 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3936095) I 12:48:47 Writing Layer 0... (LBA: 0 - 1968047) W 12:51:15 Waiting for buffers to recover... (LBA: 289920) W 12:51:27 Waiting for hard disk activity to reach threshold level... I 12:51:28 Writing Sectors... I 13:05:27 Writing Layer 1... (LBA: 1968048 - 3936095) I 13:21:48 Synchronising Cache... I 13:21:50 Closing Track... I 13:21:51 Finalising Disc... I 13:22:38 Exporting Graph Data... I 13:22:38 Graph Data File: C:\Users\ME\AppData\Roaming\ImgBurn\Graph Data Files\Slimtype_DVD_A_DS8A3S_HP53_SATURDAY-SEPTEMBER-11-2010_12-48_PM_MKM-003-00_2.4x.ibg I 13:22:38 Export Successfully Completed! I 13:22:38 Operation Successfully Completed! - Duration: 00:34:12 I 13:22:38 Average Write Rate: 3,975 KB/s (2.9x) - Maximum Write Rate: 4,192 KB/s (3.0x) Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted September 11, 2010 Share Posted September 11, 2010 If they burn and verify ok (verify your discs!!!), chances are that the disc is fine. You might find it's due to the DVD-ROM booktype that's being applied. Some players don't like playing from discs that appear to be DVD-ROM. Link to comment Share on other sites More sharing options...
dovedescent7 Posted September 11, 2010 Author Share Posted September 11, 2010 If they burn and verify ok (verify your discs!!!), chances are that the disc is fine. You might find it's due to the DVD-ROM booktype that's being applied. Some players don't like playing from discs that appear to be DVD-ROM. i know for a fact though,that is not the player,because it plays the one 8gb avchd that managed to burn What does verify do?i mean ,ive burnt many of these into coasters,so your suggesting doing again only click the verify button?That will make it playable? And yes i agree its not the discs,i went and bought the good ones that are the best for this so,yeah..its not the discs... My other question is,where is the setting that says DVD-ROM booktype? On the log AND in th program??? does it say in the log that i have the dvd rom selected? or is something else selected? Some advice on WHAT to do would be great... thank you folks again for taking my case Link to comment Share on other sites More sharing options...
dovedescent7 Posted September 11, 2010 Author Share Posted September 11, 2010 Couple things i see wrong here FIRST Let me post the log of what comes up BEFORE I BURN like on the actual imgburn itself Slimtype DVD A DS8A3S HP53 (USB) Current Profile: DVD+R DL Disc Information: Status: Empty State of Last Session: Empty Erasable: No Free Sectors: 4,173,824 Free Space: 8,547,991,552 bytes Free Time: 927:32:74 (MM:SS:FF) Next Writable Address: 0 Supported Write Speeds: 3x, 4x, 6x DVD±R DL Boundary Information: L0 Data Zone Capacity: 2,086,912 Changeable: Yes Physical Format Information (ADIP - L0): Disc ID: MBIPG101-R10-65 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 16,580,607 Last Physical Sector in Layer 0: 2,283,519 Physical Format Information (ADIP - L1): Disc ID: MBIPG101-R10-65 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 16,580,607 Last Physical Sector in Layer 0: 2,283,519 Physical Format Information (Last Recorded - L0): Disc ID: MBIPG101-R10-65 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 16,580,607 Last Physical Sector in Layer 0: 2,283,519 Physical Format Information (Last Recorded - L1): Disc ID: MBIPG101-R10-65 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 16,580,607 Last Physical Sector in Layer 0: 2,283,519 Performance (Write Speed): Descriptor 1... -> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00 -> EL: 0 (0x00000000) -> RS: 11,080 KB/s (8x) - WS: 4,155 KB/s (3x) Descriptor 2... -> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00 -> EL: 0 (0x00000000) -> RS: 11,080 KB/s (8x) - WS: 5,540 KB/s (4x) Descriptor 3... -> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00 -> EL: 0 (0x00000000) -> RS: 11,080 KB/s (8x) - WS: 8,310 KB/s (6x) NOW HERES THE LOGFILE FOR AFTER THE BURN-- two things.. 1- it says dvd rom for book type 2.it says only one layer I 12:47:21 ImgBurn Version 2.5.1.0 started! I 12:47:21 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7600) I 12:47:21 Total Physical Memory: 3,145,272 KB - Available: 1,648,928 KB W 12:47:21 Duplex Secure's SPTD driver can have a detrimental effect on drive performance. I 12:47:21 Initialising SPTI... I 12:47:21 Searching for SCSI / ATAPI devices... I 12:47:21 -> Drive 1 - Info: ATAPI DVD A DH16A1S HA11 (D:) (ATA) I 12:47:22 -> Drive 2 - Info: Slimtype DVD A DS8A3S HP53 (K:) (USB) I 12:47:22 Found 2 DVD±RW/RAMs! I 12:48:25 Operation Started! I 12:48:25 Source File: H:\ALL UTORRENT DOWNLOADS\My uncopyrighted movie. BR.1080P.Menus.and.Extras.AC3.5.1.AVCHD-JVS\My_uncopyrighted_movie.MDS I 12:48:25 Source File Sectors: 3,936,096 (MODE1/2048) I 12:48:25 Source File Size: 8,061,124,608 bytes I 12:48:25 Source File Volume Identifier: My_uncopyrighted_movie I 12:48:25 Source File Volume Set Identifier: 3C378C02003C0858 I 12:48:25 Source File Application Identifier: ImgBurn v2.5.0.0 I 12:48:25 Source File Implementation Identifier: ImgBurn I 12:48:25 Source File File System(s): UDF (2.50) I 12:48:25 Destination Device: [0:0:0] Slimtype DVD A DS8A3S HP53 (K:) (USB) I 12:48:25 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 3x, 4x, 6x) I 12:48:25 Destination Media Sectors: 4,173,824 I 12:48:25 Write Mode: DVD I 12:48:25 Write Type: DAO I 12:48:25 Write Speed: 2.4x I 12:48:25 Link Size: Auto I 12:48:25 Lock Volume: Yes I 12:48:25 Test Mode: No I 12:48:25 OPC: No I 12:48:25 BURN-Proof: Enabled W 12:48:25 Write Speed Miscompare! - Wanted: 3,324 KB/s (2.4x), Got: 4,155 KB/s (3x) I 12:48:25 Book Type Setting: DVD-ROM I 12:48:25 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes I 12:48:25 Optimal L0 Data Zone Capacity: 1,968,048 I 12:48:25 Optimal L0 Data Zone Method: Copied From Original Disc I 12:48:45 Set L0 Data Zone Capacity Succeeded! I 12:48:45 Filling Buffer... (40 MB) I 12:48:46 Writing LeadIn... I 12:48:47 Writing Session 1 of 1... (1 Track, LBA: 0 - 3936095) I 12:48:47 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3936095) I 12:48:47 Writing Layer 0... (LBA: 0 - 1968047) W 12:51:15 Waiting for buffers to recover... (LBA: 289920) W 12:51:27 Waiting for hard disk activity to reach threshold level... I 12:51:28 Writing Sectors... I 13:05:27 Writing Layer 1... (LBA: 1968048 - 3936095) I 13:21:48 Synchronising Cache... I 13:21:50 Closing Track... I 13:21:51 Finalising Disc... I 13:22:38 Exporting Graph Data... I 13:22:38 Graph Data File: C:\Users\ME\AppData\Roaming\ImgBurn\Graph Data Files\Slimtype_DVD_A_DS8A3S_HP53_SATURDAY-SEPTEMBER-11-2010_12-48_PM_MKM-003-00_2.4x.ibg I 13:22:38 Export Successfully Completed! I 13:22:38 Operation Successfully Completed! - Duration: 00:34:12 I 13:22:38 Average Write Rate: 3,975 KB/s (2.9x) - Maximum Write Rate: 4,192 KB/s (3.0x) Link to comment Share on other sites More sharing options...
ianymaty Posted September 11, 2010 Share Posted September 11, 2010 Im using the newest version of imgburn. I 12:47:21 ImgBurn Version 2.5.1.0 started! Current version: 2.5.2.0 Released: 1st September 2010 it says only one layer I 12:48:47 Writing Layer 0... (LBA: 0 - 1968047) I 13:05:27 Writing Layer 1... (LBA: 1968048 - 3936095) I see two layers W 12:51:15 Waiting for buffers to recover... (LBA: 289920)W 12:51:27 Waiting for hard disk activity to reach threshold level... That suggest that the hard drive is having hard activity Link to comment Share on other sites More sharing options...
Recommended Posts