Burn errors all of sudden

mek87 · September 15, 2010

Hey guys,

First post at the forums here but have been a huge imgburn fan for years. Here's my issue: I went away for two weeks and came back to find that my burner, an old LG GSA-4163B, no longer wants to burn DVD+R DL's. It was working fine a week ago with the exact same media. While I was gone, there were a few power outages during which the PC was on but it has a surge protector and has been through such events before.

I'm really baffled as to why this just started happening, in particular with an image that I had previously successfully burned a few short weeks ago.

Before I post the error and the log, here are some things I tried, etc.

1) I am using Fujifilm DVD+R DLs. Yes, I know they are Riteks, and i know that Verbatim's are the best. However, I tried Verbatim's and my XBox 360 drive didn't seem to like them - games were choppy and freezing. It has, however, loved the countless number of backups I have made on the Fuji's.

2) I updated my firmware to A106 and still no joy

3) I uninstalled my ATA controller and had let it reinstall, no joy. Also checked the bios, drive is set to DMA mode 2

Now for the errors/log:

I click burn and immediately, before the drive even does anything get:

"Failed to set L0 Data Zone Capacity! Reason: Invalid Field in Parameter List"

Never seen that before today but for the sake of science, I click continue.

"I/O Error!

Device: [1:0:0] HL-DT-ST DVDRAM GSA-4163B A106 (E:) (ATA)

ScsiStatus: 0x02

Interpretation: Check Condition

CDB: 2A 00 00 00 00 20 00 00 20 00

Interpretation: Write (10) - Sectors: 32 - 63

Sense Area: 70 00 05 00 00 00 00 10 2A 00 00 0E 21 00 00 00 00 00 00 00 00 00 00

Interpretation: Invalid Address for Write"

I click cancel.

Log:

I 22:59:38 ImgBurn Version 2.4.0.0 started!

I 22:59:38 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3)

I 22:59:38 Total Physical Memory: 1,048,020 KB - Available: 465,268 KB

I 22:59:39 Initialising SPTI...

I 22:59:39 Searching for SCSI / ATAPI devices...

I 22:59:39 Found 1 CD-RW and 1 DVD±RW/RAM!

I 23:00:33 Operation Started!

I 23:00:33 Source File: S:\Xbox360\MaddenNFL11.dvd

I 23:00:33 Source File Sectors: 3,827,488 (MODE1/2048)

I 23:00:33 Source File Size: 7,838,695,424 bytes

I 23:00:33 Source File Volume Identifier: DVD_ROM

I 23:00:33 Source File Volume Set Identifier: 356fc000MS UDFBridge

I 23:00:33 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 23:00:33 Source File Implementation Identifier: Microsoft CDIMAGE UDF

I 23:00:33 Source File File System(s): ISO9660, UDF (1.50)

I 23:00:33 Destination Device: [1:0:0] HL-DT-ST DVDRAM GSA-4163B A106 (E:) (ATA)

I 23:00:33 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 2.4x)

I 23:00:33 Destination Media Sectors: 3,827,520

I 23:00:33 Write Mode: DVD

I 23:00:33 Write Type: DAO

I 23:00:33 Write Speed: 2.4x

I 23:00:33 Link Size: Auto

I 23:00:33 Test Mode: No

I 23:00:33 OPC: Yes

I 23:00:33 BURN-Proof: Enabled

I 23:00:33 Book Type Setting: DVD-ROM

I 23:00:33 Optimal L0 Data Zone Capacity: 1,913,760

I 23:00:33 Optimal L0 Data Zone Method: Copied From Original Disc

W 23:01:48 Failed to set L0 Data Zone Capacity!

W 23:01:48 Reason: Invalid Field in Parameter List

I 23:01:48 Filling Buffer... (40 MB)

I 23:01:49 Writing LeadIn...

W 23:01:49 Potential 'ReadBufferCapacity' Deferred Error - Write Error

W 23:01:49 Failed to Write Sectors 32 - 63 - Invalid Address For Write

W 23:01:49 Retrying (1 of 20)...