Morpheus Posted June 22, 2006 Posted June 22, 2006 i burner cant burn up to 16x dual layered and everything i am burning is only burning at 2.4x can someone help me with this i use img burn and nero to burn all my stuff i dunno what happened that all of a sudden my stuff is only burning at 2.4x any help would be gr8 guys thx
Shamus_McFartfinger Posted June 22, 2006 Posted June 22, 2006 The window on the right hand side shows info about your drive and media. Just copy and paste it here so we can see what's going on. It'll look like this: PIONEER DVD-RW DVR-109 1.58 (ATA) Current Profile: DVD-R Disc Information: Status: Empty Erasable: No Free Sectors: 2,298,496 Free Space: 4,707,319,808 bytes Free Time: 510:48:46 (MM:SS:FF) Supported Write Speeds: 4x, 6x, 8x, 12x Pre-recorded Information: Manufacturer ID: RITEKG05 Recording Management Area Information: PIONEER DVD-RW DVR-109 Physical Format Information (Last Recorded): Book Type: DVD-R Part Version: 5 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 1 Track Path: Parallel Track Path (PTP) Linear Density: 0.267 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 0 Last Physical Sector in Layer 0: 0
Morpheus Posted June 23, 2006 Author Posted June 23, 2006 LITE-ON DVDRW SOHW-832S VTS3 (ATA) Current Profile: DVD+R Disc Information: Status: Empty Erasable: No Free Sectors: 2,295,104 Free Space: 4,700,372,992 bytes Free Time: 510:03:29 (MM:SS:FF) Supported Write Speeds: 2.4x Physical Format Information (ADIP): Disc ID: MCC-004-00 Book Type: DVD+R Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 1 Track Path: Parallel Track Path (PTP) Linear Density: 0.267 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 2,491,711 Last Physical Sector in Layer 0: 0
Morpheus Posted June 23, 2006 Author Posted June 23, 2006 and i know my burner burns up to 16x and its dual layered burner but i dont know what going on that i can only burn at 2.4 x speed
cornholio7 Posted June 23, 2006 Posted June 23, 2006 where did you get that firmware? it looks nothing like the ones for your burner. check here http://forum.rpc1.org/dl_firmware.php?download_id=1818 when i had an 832 lite-on it was only rated as 8x check your firmware- see if it helps
cornholio7 Posted June 23, 2006 Posted June 23, 2006 where did you find that firmware and how long have you had it installed?
Morpheus Posted June 23, 2006 Author Posted June 23, 2006 i dunno just recently my burner started burning at this speed the last week id say can you tell me whats wrong with it
cornholio7 Posted June 23, 2006 Posted June 23, 2006 well if it has been burning fast with that firmware on it then you must have dma problems. look at this and be sure to delete your controller and re-boot
cornholio7 Posted June 23, 2006 Posted June 23, 2006 did you delete and re-boot? windows lies about it
Morpheus Posted June 23, 2006 Author Posted June 23, 2006 yes i deleted it and still shows that drive only supports 2.4 burning any suggestions what to do now
Morpheus Posted June 23, 2006 Author Posted June 23, 2006 i was gonna reformatt will that help or no and where do i get vsom and i was wondering if you know how all out of the blue this would just start burning at 2.4 i didnt do anything no downloads or anything thx
cornholio7 Posted June 23, 2006 Posted June 23, 2006 you can get VSOM from the link i posted in post #6. re-formatting is a bit drastic if everything else is ok. is it just these discs that show 2.4x max or is it the same with other discs?
Morpheus Posted June 23, 2006 Author Posted June 23, 2006 all discs tayio yudens verbatims and verbatim dual layerd there all are 2.4x speed even my verbatims that burns at 16x
Morpheus Posted June 23, 2006 Author Posted June 23, 2006 i tried VSOM and its saying error no match drive detected this utility is only for lite on dvdrw sohw-832s drive then it says detected drives 0-0-0-0-E lite on dvdrw sohw-832s VTS3
Grain Posted June 23, 2006 Posted June 23, 2006 i tried VSOM and its saying error no match drive detected this utility is only for lite on dvdrw sohw-832s drive then it says detected drives 0-0-0-0-E lite on dvdrw sohw-832s VTS3 Pretty sure that's saying your drive is OEM. In order to flash it with 832 firmware (which is what your trying to do by the way w/ VSOM) you'll probably need to use FlashFix or something like it to get it to work. In essence you'd be converting it to a stock Liteon 832.
Grain Posted June 23, 2006 Posted June 23, 2006 Here's what you need to check out. http://digi.rpc1.org/flashfix.htm Read it well and then use at your own risk.
Grain Posted June 23, 2006 Posted June 23, 2006 Here's what you need to check out. http://digi.rpc1.org/flashfix.htm Read it well and then use at your own risk.
Recommended Posts