Rincewind Posted September 30, 2010 Posted September 30, 2010 (edited) Hello, newbie here! And of course before I start: IMGBURN is EXCELLENT! Well space on my external HD was getting tight, I copied a lot of DVDs (especially dual layers), and I had no choice but to burn them. Since I was hard pressed for DVDs I gave in and bought TDK +R DLs. Yes yes I know, bad bad VERY bad, but I had no choice. I see this as a temporary solution until I can get Verbatims and copy them over to the Verbatims. Interestingly enough I haven't had any issues WRITING and READING these discs on my LG super-multi drive (HL-DT-ST DVD-RAM GH22NP20 2.00). Just as an example: I 17:53:54 ImgBurn Version 2.5.2.0 started! I 17:53:54 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3) I 17:53:54 Total Physical Memory: 523,764 KB - Available: 151,196 KB W 17:53:54 Duplex Secure's SPTD driver can have a detrimental effect on drive performance. I 17:53:54 Initialising ASPI... I 17:53:54 WNASPI32.DLL - Adaptec's ASPI Layer - ASPI for Win32 (95/NT) DLL - Version 4.6.0.1021 I 17:53:55 Searching for SCSI / ATAPI devices... I 17:53:55 -> Drive 1 - Info: HL-DT-ST DVD-RAM GH22NP20 2.00 (F:) (ATA) I 17:53:55 -> Drive 2 - Info: RET BSLYN4LQZK 1.03 (D:) (SCSI) I 17:53:55 Found 1 DVD±RW/RAM and 1 BD-ROM/HD DVD-ROM! I 17:58:09 Operation Started! I 17:58:09 Source File: E:\Double Layer\Stripes\STRIPES.MDS I 17:58:09 Source File Sectors: 3,354,560 (MODE1/2048) I 17:58:09 Source File Size: 6,870,138,880 bytes I 17:58:09 Source File Volume Identifier: STRIPES I 17:58:09 Source File Volume Set Identifier: 3D2E496800332FB5 I 17:58:09 Source File Application Identifier: IMGBURN V2.5.1.0 - THE ULTIMATE IMAGE BURNER! I 17:58:09 Source File Implementation Identifier: ImgBurn I 17:58:09 Source File File System(s): ISO9660, UDF (1.02) I 17:58:09 Destination Device: [1:0:0] HL-DT-ST DVD-RAM GH22NP20 2.00 (F:) (ATA) I 17:58:09 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 4x, 6x, 8x) I 17:58:09 Destination Media Sectors: 4,173,824 I 17:58:09 Write Mode: DVD I 17:58:09 Write Type: DAO I 17:58:09 Write Speed: 4x I 17:58:09 Link Size: Auto I 17:58:09 Lock Volume: Yes I 17:58:09 Test Mode: No I 17:58:09 OPC: Yes I 17:58:09 BURN-Proof: Enabled I 17:58:09 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x) I 17:58:09 Book Type Setting: DVD-ROM I 17:58:20 Optimal L0 Data Zone Capacity: 1,699,280 I 17:58:20 Optimal L0 Data Zone Method: Copied From Original Disc I 17:58:20 Set L0 Data Zone Capacity Succeeded! I 17:58:20 Filling Buffer... (30 MB) I 17:58:21 Writing LeadIn... I 17:58:47 Writing Session 1 of 1... (1 Track, LBA: 0 - 3354559) I 17:58:47 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3354559) I 17:58:47 Writing Layer 0... (LBA: 0 - 1699279) I 18:09:56 Writing Layer 1... (LBA: 1699280 - 3354559) I 18:20:16 Synchronising Cache... I 18:20:38 Closing Track... I 18:21:13 Finalising Disc... I 18:21:41 Operation Successfully Completed! - Duration: 00:23:32 I 18:21:41 Average Write Rate: 5,204 KB/s (3.8x) - Maximum Write Rate: 5,618 KB/s (4.1x) I 18:21:41 Cycling Tray before Verify... W 18:21:50 Waiting for device to become ready... I 18:22:07 Device Ready! I 18:22:10 Operation Started! I 18:22:10 Source Device: [1:0:0] HL-DT-ST DVD-RAM GH22NP20 2.00 (F:) (ATA) I 18:22:10 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: RITEK-S04-66) (Speeds: 4x, 6x, 8x) I 18:22:10 Image File: E:\Double Layer\Stripes\STRIPES.MDS I 18:22:10 Image File Sectors: 3,354,560 (MODE1/2048) I 18:22:10 Image File Size: 6,870,138,880 bytes I 18:22:10 Image File Volume Identifier: STRIPES I 18:22:10 Image File Volume Set Identifier: 3D2E496800332FB5 I 18:22:10 Image File Application Identifier: IMGBURN V2.5.1.0 - THE ULTIMATE IMAGE BURNER! I 18:22:10 Image File Implementation Identifier: ImgBurn I 18:22:10 Image File File System(s): ISO9660, UDF (1.02) I 18:22:10 Read Speed (Data/Audio): MAX / MAX I 18:22:10 Verifying Session 1 of 1... (1 Track, LBA: 0 - 3354559) I 18:22:10 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 3354559) I 18:22:10 Verifying Layer 0... (LBA: 0 - 1699279) I 18:27:27 Verifying Layer 1... (LBA: 1699280 - 3354559) I 18:32:28 File Successfully Deleted: E:\Double Layer\Stripes\STRIPES.ISO I 18:32:28 File Successfully Deleted: E:\Double Layer\Stripes\STRIPES.MDS Anyways though my set top dvd player doesn't like these discs. What I do find interesting is that the burner itself can read any DL disc I have burned just fine. I guess the pc dvd drives are just better than set top players somehow? Online is always the way to go, however now I am noticing that even the quality of Verbatims (through reviews) can on rare occasion be hit-or-miss. This due to the fact that where the discs were manufactured, usually India or Taiwan would be the issue. It is interesting also that for optical media for the most part Taiwan sucks, yet hardware such as burners(?) are actually decent? Why is that? Edited September 30, 2010 by Rincewind
spinningwheel Posted September 30, 2010 Posted September 30, 2010 Rincewind; I guess the pc dvd drives are just better than set top players somehow? Computer drives follow a strict set of 'computer logic' and don't care where the data comes from as long as it's readable; whereas the algorithm in the dvd players are written by manufacturers and have to conform to the dvd industry standards and not computer manufacturers standards. I t is interesting also that for optical media for the most part Taiwan sucks, yet hardware such as burners(?) are actually decent? Why is that? Different industries...why do apples and oranges taste different I guess.
Rincewind Posted September 30, 2010 Author Posted September 30, 2010 You got a point there. Praise BOB!
dbminter Posted October 1, 2010 Posted October 1, 2010 I, too, have used the TDK Ritek DVD+R DL discs with no problems reading and verifying. Haven't tested them in a player yet. Like you, I used them as an expedient means until I could get a hold of Verbatim. As far as Ritek goes, it's apparently a country specific thing. While not the best media, Ritek in America is apparently a far different beast as far as quality goes than Riteks in Europe.
Rincewind Posted October 1, 2010 Author Posted October 1, 2010 (edited) Well you might have better luck, depending upon if you have a REAL quality DVD player. I unfortunately have cheapo players, a Polaroid player, and a vcr/dvd combo player (Broksonik). Actually my Polaroid player handles *most* +R DLs ok. Verbatim and Memorex, but it doesn't like these ritek discs. The only 'saving grace' about my Polaroid player, is that I easily found the region unlock code, and it has an option to change from NTSC, PAL and PAL60, so whenever I run into a PAL formatted disc, I switch to PAL60, and I get a normal image, no black & white jumping around image. So which one is better Ritek Europe or USA variant? I also wanted to buy the Tayo-Yuden discs, since I heard those are very high up there in quality, but to my disappointment, they don't seem to produce any DLs, strictly SL only. -edit Well I'm eating my words now. There are some available, but only -R not +R , and very little media. http://www.meritline.com/jvc-dl-dvd-r-8x-dual-layer-dl-photo-grade-gold-lacquer-branded-vdr85hgs10---p-39443.aspx?source=fgmedia http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=330472824876&rvr_id=148176967087&crlp=1_263602_263622&UA=WXF%3F&GUID=7738926b12a0a0e204d19a21fdc1f4dc&itemid=330472824876&ff4=263602_263622 http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=390173142217&rvr_id=148220410027&crlp=1_263602_263622&UA=WXF%3F&GUID=7738926b12a0a0e204d19a21fdc1f4dc&itemid=390173142217&ff4=263602_263622 Edited October 1, 2010 by Rincewind
dbminter Posted October 1, 2010 Posted October 1, 2010 I only know of the European versions from what gets posted here on the forums. From that and my personal experience with the US version, the US version appears to be of better quality. But, I'd still get Verbatim +R DL's whenever possible.
spinningwheel Posted October 2, 2010 Posted October 2, 2010 Praise BOB! Pretty astute observation there Rincewind..
Rincewind Posted October 3, 2010 Author Posted October 3, 2010 Yep, I'm a subgenii and have listened to hours of the Subgenius Hour Of Slack podcasts which reminds me, I better get this weeks podcast and listen to it.
dbminter Posted October 3, 2010 Posted October 3, 2010 Actually, I had wondered what happened to the picture of Bob. I was checking on this thread the other day and there wasn't the expected picture of Bob, for some reason. I think I first encountered Bob and the Church in Robert Anton Wilson's fake screenplay book Reality Is What You Can Get Away With, one of my favorite books.
spinningwheel Posted October 4, 2010 Posted October 4, 2010 Deeb, I didn't delete the pic, so I don't know why "HE" wasn't there. Rince, Make sure you listen to the podcasts at least semi-annually, never can tell when an xist may decide to visit and test you....
Recommended Posts