Timothy Posted December 11, 2010 Share Posted December 11, 2010 Hello! Great Program! I have been reading existing home movie DVDs and converting them to .iso files to an external HDD for use with a WD HDTV unit, so we can watch on the TV when the relative visit for the holidays. I had been using DVD Decrypter, but the WD TV unit did not read the files correctly to use all of the features. Anyways, I did not have a problem with the program ejecting DVDs after it was done reading the DVD. On the "Device" menu, I am checking 'eject after' and 'read'. I am assuming that should be the correct setting, since I am doing a build and reading from the DVD. I have also tried the other options, one by one with no result after the 'build' to the HDD. It is not a big problem, since I just Right Click the drive icon and eject via the device menu. Just curious for future reference. I am using Win 7 32-bit Ultimate on a HP DV-5 laptop. I am not sure of the make of the DVD drive, since it normally gets picked up by most software I run. Link to comment Share on other sites More sharing options...
ianymaty Posted December 11, 2010 Share Posted December 11, 2010 That setting: Eject Tray After... Read, affect only if you use "Read mode" aka "Create image file from disc", and has no effect on Explorer type read that is used in "Build mode" and that's the way it should be. Link to comment Share on other sites More sharing options...
Recommended Posts