lunyk12 Posted January 10, 2011 Posted January 10, 2011 (edited) hi i got problem while trying to burn xbox games on dvd + r dl. Once the verification step arrives, it says '' layouts do not match ''. I just bought new TSSTcorp CDDVDW SE-S084C TS01 (USB) from samsung. 3 times i've succesfully copied games but since this problem appears, i am no more able to do it. TSSTcorp CDDVDW SE-S084C TS01 (USB) Current Profile: DVD+R DL Disc Information: Status: Empty State of Last Session: Empty Erasable: No Free Sectors: 4,173,824 Free Space: 8,547,991,552 bytes Free Time: 927:32:74 (MM:SS:FF) Next Writable Address: 0 Physical Format Information (ADIP - L0): Disc ID: MKM-001-00 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 16,580,607 Last Physical Sector in Layer 0: 2,283,519 Physical Format Information (ADIP - L1): Disc ID: MKM-001-00 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 16,580,607 Last Physical Sector in Layer 0: 2,283,519 Physical Format Information (Last Recorded - L0): Disc ID: MKM-001-00 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 16,580,607 Last Physical Sector in Layer 0: 2,283,519 Physical Format Information (Last Recorded - L1): Disc ID: MKM-001-00 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 16,580,607 Last Physical Sector in Layer 0: 2,283,519 thank you - Dont know if it matters or not, but i've used two different dvd +r dl, verbatim and memorex. Edited January 10, 2011 by lunyk12
LIGHTNING UK! Posted January 10, 2011 Posted January 10, 2011 Do you have the log too? (that was the disc info) Was that disc info from a new disc or the one you'd burnt? If it was the burnt disc, the drive is still reporting it as if it's blank. It's too late now I know, but avoid slimline drives wherever possible. They might look nice but they're rubbish at burning!
lunyk12 Posted January 10, 2011 Author Posted January 10, 2011 Do you have the log too? (that was the disc info) Was that disc info from a new disc or the one you'd burnt? If it was the burnt disc, the drive is still reporting it as if it's blank. It's too late now I know, but avoid slimline drives wherever possible. They might look nice but they're rubbish at burning! here is the log : I 11:02:51 ImgBurn Version 2.5.2.0 started! I 11:02:51 Microsoft Windows Vista Home Premium Edition (6.0, Build 6002 : Service Pack 2) I 11:02:51 Total Physical Memory: 2,880,592 KB - Available: 1,626,072 KB I 11:02:51 Initialising SPTI... I 11:02:51 Searching for SCSI / ATAPI devices... I 11:02:51 -> Drive 1 - Info: HL-DT-ST DVDRAM GSA-T50L SC04 (E:) (ATA) I 11:02:51 -> Drive 2 - Info: TSSTcorp CDDVDW SE-S084C TS02 (F:) (USB) I 11:02:51 Found 2 DVD±RW/RAMs! I 11:04:32 Operation Started! I 11:04:32 Source File: C:\Users\Jeff\Documents\Vuze Downloads\Star.Wars.The.Force.Unleashed.II.XBOX360-MARVEL\mvl-swtf\mvl-swtf.dvd I 11:04:32 Source File Sectors: 3,827,488 (MODE1/2048) I 11:04:32 Source File Size: 7,838,695,424 bytes I 11:04:32 Source File Volume Identifier: DVD_ROM I 11:04:32 Source File Volume Set Identifier: ec67c000MS UDFBridge I 11:04:32 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 11:04:32 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 11:04:32 Source File File System(s): ISO9660, UDF (1.50) I 11:04:32 Destination Device: [0:0:0] TSSTcorp CDDVDW SE-S084C TS02 (F:) (USB) I 11:04:32 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 3x, 4x, 6x) I 11:04:32 Destination Media Sectors: 4,173,824 I 11:04:32 Write Mode: DVD I 11:04:32 Write Type: DAO I 11:04:32 Write Speed: 2.4x I 11:04:32 Link Size: Auto I 11:04:32 Lock Volume: Yes I 11:04:32 Test Mode: No I 11:04:32 OPC: No I 11:04:32 BURN-Proof: Enabled W 11:04:32 Write Speed Miscompare! - Wanted: 3,324 KB/s (2.4x), Got: 4,155 KB/s (3x) I 11:04:32 Book Type Setting: DVD-ROM I 11:04:32 User Specified L0 Data Zone Capacity: 1,913,760 I 11:04:40 Set L0 Data Zone Capacity Succeeded! I 11:04:41 Filling Buffer... (40 MB) I 11:04:45 Writing LeadIn... I 11:04:47 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 11:04:47 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 11:04:47 Writing Layer 0... (LBA: 0 - 1913759) W 11:08:36 Waiting for buffers to recover... (LBA: 432832) W 11:08:49 Waiting for hard disk activity to reach threshold level... I 11:10:18 Writing Sectors... W 11:11:57 Waiting for buffers to recover... (LBA: 622464) W 11:12:01 Waiting for hard disk activity to reach threshold level... I 11:15:28 Writing Sectors... W 11:23:59 Waiting for buffers to recover... (LBA: 1653536) W 11:24:12 Waiting for hard disk activity to reach threshold level... I 11:38:28 Writing Sectors... I 11:40:38 Writing Layer 1... (LBA: 1913760 - 3827487) I 11:57:08 Synchronising Cache... I 11:57:11 Closing Track... I 11:57:12 Finalising Disc... I 11:57:58 Exporting Graph Data... I 11:57:58 Graph Data File: C:\Users\Jeff\AppData\Roaming\ImgBurn\Graph Data Files\TSSTcorp_CDDVDW_SE-S084C_TS02_JANUARY-10-11_11-04_AM_RITEK-S04-66_2.4x.ibg I 11:57:58 Export Successfully Completed! I 11:57:58 Operation Successfully Completed! - Duration: 00:53:26 I 11:57:58 Average Write Rate: 2,437 KB/s (1.8x) - Maximum Write Rate: 4,366 KB/s (3.2x) I 11:57:58 Cycling Tray before Verify... W 13:07:00 Waiting for device to become ready... I 13:07:31 Device Ready! E 13:07:31 Verify Failed! - Reason: Layouts do not match. and its the burnt disc info.. thanks
LIGHTNING UK! Posted January 10, 2011 Posted January 10, 2011 The disc info and the log don't match. Different discs, different firmware. ImgBurn is out of date. Based on your current log, read this: http://forum.imgburn.com/index.php?showtopic=8000
BobN Posted January 13, 2011 Posted January 13, 2011 If you still have this problem after installing an up-to-date copy of Imgburn and make sure you are using good discs (I use Philips DVDs) you might take a look at a question I asked about this same sort of thing - empty discs after an apparently good burn. Look at my reply to my own question at http://forum.imgburn.com/index.php?showtopic=16669 I'm not saying that it will fix your problem but it is a simple thing to try. By the way, the drive I was having trouble with is also a TSSTcorp drive - maybe just a coincident but you never know. Bob
Recommended Posts