Magesown Posted October 20, 2011 Posted October 20, 2011 (edited) Hello there, Was burning a copy of my self-owned game Fifa12, to play safetly and to hand to the kids to take away from home (It might get lost etc) In other words always handy to have a copy. When at the finalising stage an error occured that I don't know how to counter. I've checked for new firmware to my DVD burner (Optiarc) But there were no updates to find for the specfic one i've got. (Edit : I've recently updated my driver, but still waiting for a reponse since this might not be the specific faulter)!! Aswell as it's also stated that you should make these copies at 2x Speed to make them work properly, but I was declined the option, you can't counter this can you? And for the record of what i've attained in information by reading the forum, I'm using Verbatim DVD+R DL 8.5GB 8x Speed. Since they are to be most reliable, yet I havn't retained a single complete copy on this brand, only made copies with Fujifilm DVD's that work properly. (Though this was a while back.) Thanks for whatever answers you may have got, aswell as all the great forum help overall. I 16:55:25 -> Drive 1 - Info: Optiarc DVD RW AD-7240S 1.01 (D:) (ATA) I 16:55:25 -> Drive 2 - Info: NMFIXKH PY3K5Y7K 1.04 (E:) (SCSI) I 16:55:25 -> Drive 3 - Info: NMFIXKH PY3K5Y7K 1.04 (F:) (SCSI) I 16:55:25 Found 1 DVD±RW/RAM and 2 BD-ROMs! I 16:57:42 Operation Started! I 16:57:42 Source File: C:\Users\Wulff\Desktop\FIFA12XBOX360.dvd I 16:57:42 Source File Sectors: 3 827 488 (MODE1/2048) I 16:57:42 Source File Size: 7 838 695 424 bytes I 16:57:42 Source File Volume Identifier: 13599 I 16:57:42 Source File Volume Set Identifier: ceee8000MS UDFBridge I 16:57:42 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 16:57:42 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 16:57:42 Source File File System(s): ISO9660; UDF (1.50) I 16:57:42 Destination Device: [3:0:0] Optiarc DVD RW AD-7240S 1.01 (D:) (ATA) I 16:57:42 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) I 16:57:42 Destination Media Supported Write Speeds: 4x; 6x; 8x I 16:57:42 Destination Media Sectors: 4 173 824 I 16:57:42 Write Mode: DVD I 16:57:42 Write Type: DAO I 16:57:42 Write Speed: 2x I 16:57:42 Link Size: Auto I 16:57:42 Lock Volume: Yes I 16:57:42 Test Mode: No I 16:57:42 OPC: No I 16:57:42 BURN-Proof: Enabled W 16:57:42 Write Speed Miscompare! - Wanted: 2 770 KB/s (2x), Got: 5 540 KB/s (4x) W 16:57:42 The drive only supports writing these discs at 4x; 6x; 8x. I 16:57:42 Book Type Setting: DVD-ROM I 16:57:42 User Specified L0 Data Zone Capacity: 1 913 760 I 16:57:49 Set L0 Data Zone Capacity Succeeded! I 16:57:49 Filling Buffer... (40 MB) I 16:57:50 Writing LeadIn... I 16:57:54 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 16:57:54 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 16:57:54 Writing Layer 0... (LBA: 0 - 1913759) I 17:09:54 Writing Layer 1... (LBA: 1913760 - 3827487) I 17:22:03 Synchronising Cache... I 17:22:04 Closing Track... I 17:22:17 Finalising Disc... W 17:23:39 Potential 'WaitImmediateIO' Deferred Error - (99%, 0/3) - Power Calibration Area Error W 17:23:39 Finalise Disc Failed! - Reason: Power Calibration Area Error W 17:23:39 Retrying (1 of 3)... I 17:25:12 Exporting Graph Data... I 17:25:12 Graph Data File: C:\Users\Wulff\AppData\Roaming\ImgBurn\Graph Data Files\Optiarc_DVD_RW_AD-7240S_1.01_DEN-20-OKTOBER-2011_16-57_MKM-003-00_2x.ibg I 17:25:12 Export Successfully Completed! I 17:25:13 Operation Successfully Completed! - Duration: 00:27:25 I 17:25:13 Average Write Rate: 5 286 KB/s (3.8x) - Maximum Write Rate: 6 113 KB/s (4.4x) Edited October 20, 2011 by Magesown
mmalves Posted October 20, 2011 Posted October 20, 2011 Update your burner's firmware and try burning at 6x or 8x.
LIGHTNING UK! Posted October 20, 2011 Posted October 20, 2011 Where did you check for firmware updates in the first place?! Right click the drive drop down selection box and you'll see an option to check for firmware updates on there. (which will take you to where mmalves has already pointed you)
Magesown Posted October 21, 2011 Author Posted October 21, 2011 Where did you check for firmware updates in the first place?! Right click the drive drop down selection box and you'll see an option to check for firmware updates on there. (which will take you to where mmalves has already pointed you) Didn't even know you had that implemented in Imgburn, awesome. Fixed it now, you guys rock and sure got it all figured out. Thanks!
Recommended Posts