burning bluray dual layer file

[goose21]

ok here is the problem and have searched and found nothing to solve it.

used any dvd ripper. this works great if file is under 25 G.

when burning a Dual layer disk (50 G) will not burn the file. will only one layer. Tired of making 14 dollar coasters.

Any suggestions would be greatly appreciated

[Cynthia]

Can you post a log from such a burn?

[goose21]

going to try another bluray dl disk tomorrow will send that log don't have anything handy. Sorry

[Cynthia]

Old logs.

 

http://forum.imgburn.com/index.php?showtopic=14632

[goose21]

Can you post a log from such a burn?

 

 

Cynthia here is the log file from when i tried to do a dual layer disk

Not to sound stupid but when i use the help files on how to burn a blu ray disk the directions to me seem to leave out a few things. I was under the assumption that the directions were from start to finish(Disk to file then back to disk) and not in the middle (File to disk). I can get the file to the hard drive. When i make a file it makes a iso file and the stuff described in the procedure to burn a blu ray don't even show up( no bdsm file or any of the files that were posted to the help file. so far the biggest problem is dual layer. I did a disk under 25 gig and it came out beautiful> tahnk you for your patience.

D

 

//****************************************\\

; ImgBurn Version 2.5.6.0 - Log

; Thursday, 20 October 2011, 18:04:16

; \\****************************************//

;

;

I 17:19:00 ImgBurn Version 2.5.6.0 started!

I 17:19:00 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3)

I 17:19:00 Total Physical Memory: 2,096,172 KB - Available: 1,300,448 KB

W 17:19:00 AnyDVD can interfere with ImgBurn's ability to verify accurately, please ensure it's disabled!

I 17:19:00 Initialising SPTI...

I 17:19:00 Searching for SCSI / ATAPI devices...

I 17:19:00 -> Drive 1 - Info: ATAPI iHBS212 2 5L03 (D:) (ATA)

I 17:19:00 Found 1 BD-RE!

I 17:19:20 Operation Started!

I 17:19:20 Source File: C:\Documents and Settings\Damian\My Documents\GULLIVERS_TRAVELS.dvd

I 17:19:20 Source File Sectors: 16,188,512 (MODE1/2048)

I 17:19:20 Source File Size: 33,154,072,576 bytes

I 17:19:20 Source File Volume Identifier: GULLIVERS_TRAVELS

I 17:19:20 Source File Volume Set Identifier: 8CD8E0EE8CB83F09_VOLUME_SET_ID

I 17:19:20 Source File Application Identifier: APPLICATION_ID

I 17:19:20 Source File Implementation Identifier: IMPLEMENTATION_ID

I 17:19:20 Source File File System(s): UDF (2.50)

I 17:19:20 Destination Device: [2:0:0] ATAPI iHBS212 2 5L03 (D:) (ATA)

I 17:19:20 Destination Media Type: BD-R (Disc ID: MEI-T02-001)

I 17:19:20 Destination Media Supported Write Speeds: 4x

I 17:19:20 Destination Media Sectors: 24,438,784

I 17:19:20 Write Mode: BD

I 17:19:20 Write Type: DAO

I 17:19:20 Write Speed: MAX

I 17:19:20 BD-R Verify Not Required: Yes

I 17:19:20 Link Size: Auto

I 17:19:20 Lock Volume: Yes

I 17:19:20 Test Mode: No

I 17:19:20 OPC: No

I 17:19:20 BURN-Proof: Enabled

I 17:19:22 Write Speed Successfully Set! - Effective: 17,980 KB/s (4x)

I 17:19:22 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes

I 17:20:23 Filling Buffer... (40 MB)

I 17:20:25 Writing LeadIn...

I 17:20:27 Writing Session 1 of 1... (1 Track, LBA: 0 - 16188511)

I 17:20:27 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 16188511)

I 17:20:27 Writing Layer 0... (LBA: 0 - 12219391)

W 17:37:52 Waiting for buffers to recover... (LBA: 9009984)

W 17:38:02 Waiting for hard disk activity to reach threshold level...

I 17:38:03 Writing Sectors...

I 17:44:19 Writing Layer 1... (LBA: 12219392 - 16188511)

I 17:51:56 Synchronising Cache...

I 17:52:00 Closing Track...

I 17:52:01 Finalising Disc...

I 17:52:19 Exporting Graph Data...

I 17:52:19 Graph Data File: C:\Documents and Settings\Damian\Application Data\ImgBurn\Graph Data Files\ATAPI_iHBS212_2_5L03_THURSDAY-OCTOBER-20-2011_5-19_PM_MEI-T02-001_MAX.ibg

I 17:52:19 Export Successfully Completed!

I 17:52:19 Operation Successfully Completed! - Duration: 00:32:58

I 17:52:19 Average Write Rate: 17,148 KB/s (3.8x) - Maximum Write Rate: 18,293 KB/s (4.1x)

I 17:52:19 Cycling Tray before Verify...

W 17:52:26 Waiting for device to become ready...

I 17:52:45 Device Ready!

I 17:52:49 Operation Started!

I 17:52:49 Source Device: [2:0:0] ATAPI iHBS212 2 5L03 (D:) (ATA)

I 17:52:49 Source Media Type: BD-R (Disc ID: MEI-T02-001)

I 17:52:49 Source Media Supported Write Speeds: 4x

I 17:52:49 Image File: C:\Documents and Settings\Damian\My Documents\GULLIVERS_TRAVELS.dvd

I 17:52:49 Image File Sectors: 16,188,512 (MODE1/2048)

I 17:52:49 Image File Size: 33,154,072,576 bytes

I 17:52:49 Image File Volume Identifier: GULLIVERS_TRAVELS

I 17:52:49 Image File Volume Set Identifier: 8CD8E0EE8CB83F09_VOLUME_SET_ID

I 17:52:49 Image File Application Identifier: APPLICATION_ID

I 17:52:49 Image File Implementation Identifier: IMPLEMENTATION_ID

I 17:52:49 Image File File System(s): UDF (2.50)

I 17:52:49 Read Speed (Data/Audio): MAX / MAX

I 17:52:50 Verifying Session 1 of 1... (1 Track, LBA: 0 - 16188511)

I 17:52:50 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 16188511)

I 17:52:50 Verifying Layer 0... (LBA: 0 - 12219391)

W 18:01:46 Failed to Read Sector 5287073 - Reason: L-EC Uncorrectable Error

W 18:01:46 Sector 5287073 maps to File: \BDMV\STREAM\00800.m2ts

W 18:02:02 Retrying (1)...

W 18:02:11 Miscompare at LBA: 5287072, Offset: 0, File: \BDMV\STREAM\00800.m2ts

W 18:02:11 Device: 0x30

W 18:02:11 Image File: 0x08

W 18:02:11 Total Errors in Sector: 2,034

I 18:02:11 Verifying Sectors...

W 18:02:18 Retry Failed - Reason: L-EC Uncorrectable Error

W 18:03:01 Failed to Read Sector 5287073 - Reason: L-EC Uncorrectable Error

W 18:03:01 Sector 5287073 maps to File: \BDMV\STREAM\00800.m2ts

W 18:03:07 Failed to Read Sector 5287074 - Reason: L-EC Uncorrectable Error

W 18:03:07 Sector 5287074 maps to File: \BDMV\STREAM\00800.m2ts

W 18:03:09 Failed to Read Sector 5287074 - Reason: L-EC Uncorrectable Error

W 18:03:09 Sector 5287074 maps to File: \BDMV\STREAM\00800.m2ts

W 18:03:16 Failed to Read Sector 5287075 - Reason: L-EC Uncorrectable Error

W 18:03:16 Sector 5287075 maps to File: \BDMV\STREAM\00800.m2ts

W 18:03:18 Failed to Read Sector 5287075 - Reason: L-EC Uncorrectable Error

W 18:03:18 Sector 5287075 maps to File: \BDMV\STREAM\00800.m2ts

W 18:03:24 Failed to Read Sector 5287076 - Reason: L-EC Uncorrectable Error

W 18:03:24 Sector 5287076 maps to File: \BDMV\STREAM\00800.m2ts

W 18:03:30 Failed to Read Sector 5287076 - Reason: L-EC Uncorrectable Error

W 18:03:30 Sector 5287076 maps to File: \BDMV\STREAM\00800.m2ts

W 18:03:37 Failed to Read Sector 5287077 - Reason: L-EC Uncorrectable Error

W 18:03:37 Sector 5287077 maps to File: \BDMV\STREAM\00800.m2ts

E 18:03:57 Failed to Read Sector 5287077 - Reason: L-EC Uncorrectable Error

E 18:03:57 Sector 5287077 maps to File: \BDMV\STREAM\00800.m2ts

E 18:03:57 Failed to Verify Sectors!

I 18:03:58 Exporting Graph Data...

I 18:03:58 Graph Data File: C:\Documents and Settings\Damian\Application Data\ImgBurn\Graph Data Files\ATAPI_iHBS212_2_5L03_THURSDAY-OCTOBER-20-2011_5-19_PM_MEI-T02-001_MAX.ibg

I 18:03:58 Export Successfully Completed!

E 18:03:58 Operation Failed! - Duration: 00:11:07

I 18:03:58 Average Verify Rate: 15,877 KB/s (3.5x) - Maximum Verify Rate: 26,676 KB/s (5.9x)

I 18:04:16 Close Request Acknowledged

I 18:04:16 Closing Down...

I 18:04:16 Shutting down SPTI...

I 18:04:16 ImgBurn closed!

;

[ianymaty]

There is a newer firmware for your drive, try with the latest installed. http://www.firmwarehq.com/Lite-On/iHBS212%2B2/files.html

[boredombulker]

I know this topic is really old but just in case anyone comes across this in the future. I had a similar drive (iHBS112 2) that was actually rebranded as an asus drive (BW-12B1ST). It would not burn DL discs with the one and only asus firmware available. I flashed it as the iHBS112 2 with the latest firmware at the time (PL06) and was able to burn a DL with imgburn but it fails verification. I tried again with Cyberlink Power2go 8 and it worked fine, no problems. I'm not sure where the problem lies but for some reason it wouldnt burn in imgburn.

[spinningwheel]

Cyberlink Power2go 8

Doesn't do the evaluation of the burned disc the same way the ImgBurn does, therefore will not show errors that you see in ImgBurn.