SkyHawk Posted January 19, 2012 Share Posted January 19, 2012 Hi Lightning, Let me start by saying I've used this program for years. It might not be the most friendly thing for non-technical users, but as a power user who knows what I want and want it done right, your program is my go-to tool. I've got a two-drive Primera Composer Pro robot, that I've retrofitted with a Firewire-SATA bridgeboard and a pair of Pioneer 216 drives. The only software I can find that can use this setup is the supplied PrimoDVD, which I don't like much. The bridgeboard limits me to 4x operations if I don't want to underrun the buffer. I'd love to just connect to the drives via straight SATA, but then PrimoDVD refuses to work with the robot! Even if I can only use one drive at a time, I'd love to be able to use this robot with Imgburn! Based on this thread here, http://forum.imgburn.com/index.php?showtopic=17844 I think your existing "Generic Serial Robot" code can probably do the trick, just tweaked to use the commandset found here : http://hyperdiscs.pbworks.com/w/page/19778464/Command%20Sets%20--%20Primera%20Composer%20or%20Conductor Any chance? I'm more than willing to provide beta-testing if need be. I should also mention that PrimoDVD relies on a set of DLLs that look similar to the PTRobot dll files for the Bravo units. My PrimoDVD directory has ROBO.dll, PxRoboDP.dll, PxRoboDPPRO.dll, PxRoboMAX.dll, PxRoboXLPRO.dll (That's for my ComposerPro), and PXSDKPLS.DLL. I haven't been able to find any information or a published API about these. Link to comment Share on other sites More sharing options...
Recommended Posts