Jump to content

Cant burn xbox games...


DannyPt
 Share

Recommended Posts

whenever i try to burn xbox games with imgburn it have this log:

 

 

 

I 17:52:29 ImgBurn Version 2.5.7.0 started!

I 17:52:29 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1)

I 17:52:29 Total Physical Memory: 8.387.704 KB - Available: 4.942.320 KB

I 17:52:29 Initialising SPTI...

I 17:52:29 Searching for SCSI / ATAPI devices...

I 17:52:29 -> Drive 1 - Info: DTSOFT BDROM 1.05 (F:) (Virtual)

I 17:52:31 -> Drive 2 - Info: HL-DT-ST DVDRRW GSA-H30L S655-06 (E:) (ATA)

I 17:52:31 Found 1 DVD±RW/RAM and 1 BD-ROM!

W 18:02:44 User accepted disc space warning and is attempting to truncate!

I 18:02:44 Operation Started!

I 18:02:44 Source File: A:\Transferências\Xbox\FIFA.13.PAL.XBOX360-COMPLEX-[bTARENA.org]\FIFA.13.PAL.XBOX360-COMPLEX-[bTARENA.org].dvd

I 18:02:44 Source File Sectors: 4.267.015 (MODE1/2048)

I 18:02:44 Source File Size: 8.738.846.720 bytes

I 18:02:44 Source File Volume Identifier: DVD_ROM

I 18:02:44 Source File Volume Set Identifier: 3a03c000MS UDFBridge

I 18:02:44 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 18:02:44 Source File Implementation Identifier: Microsoft CDIMAGE UDF

I 18:02:44 Source File File System(s): ISO9660; UDF (1.50)

I 18:02:44 Destination Device: [3:0:0] HL-DT-ST DVDRRW GSA-H30L S655 (E:) (ATA)

I 18:02:44 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67)

I 18:02:44 Destination Media Supported Write Speeds: 4x; 6x; 8x

I 18:02:44 Destination Media Sectors: 4.173.824

I 18:02:44 Write Mode: DVD

I 18:02:44 Write Type: DAO

I 18:02:44 Write Speed: 2,4x

I 18:02:44 DVD+R DL Reserve Track: No

I 18:02:44 Link Size: Auto

I 18:02:44 Lock Volume: Yes

I 18:02:44 Test Mode: No

I 18:02:44 OPC: No

I 18:02:44 BURN-Proof: Disabled

W 18:02:44 Write Speed Miscompare! - Wanted: 3.324 KB/s (2,4x), Got: 5.540 KB/s (4x)

W 18:02:44 The drive only supports writing these discs at 4x; 6x; 8x.

I 18:02:44 Book Type Setting: N/A (Reason: Invalid Command Operation Code)

W 18:02:44 Optimal layer break position exceeds L0 capacity.

W 18:02:44 Optimal L0 Sectors: 2.133.520

W 18:02:44 Maximum L0 Sectors: 2.086.912

I 18:02:44 Optimal L0 Data Zone Capacity: 2.133.520

I 18:02:44 Optimal L0 Data Zone Method: Copied From Original Disc

W 18:02:44 Set L0 Data Zone Capacity Failed! - Reason: Invalid Field in CDB

I 18:02:47 Filling Buffer... (512 MB)

I 18:02:54 Writing LeadIn...

I 18:03:15 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014)

I 18:03:15 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014)

I 18:03:15 Writing Layer 0... (LBA: 0 - 2133519)

I 18:18:11 Writing Layer 1... (LBA: 2133520 - 4267014)

W 18:24:18 Failed to Write Sectors 2134160 - 2134191 - Reason: No Seek Complete

W 18:24:18 Retrying (1 of 20)...

W 18:24:18 Retry Failed - Reason: No Seek Complete

W 18:24:18 Retrying (2 of 20)...

I 18:24:18 Writing Sectors...

W 18:29:59 Failed to Write Sectors 2134832 - 2134863 - Reason: No Seek Complete

W 18:29:59 Retrying (1 of 20)...

W 18:29:59 Retry Failed - Reason: No Seek Complete

W 18:29:59 Retrying (2 of 20)...

I 18:29:59 Writing Sectors...

W 18:35:15 Failed to Write Sectors 2135504 - 2135535 - Reason: No Seek Complete

W 18:35:16 Retrying (1 of 20)...

W 18:35:16 Retry Failed - Reason: No Seek Complete

W 18:35:16 Retrying (2 of 20)...

I 18:35:16 Writing Sectors...

and it would pass throw there until it give the error of the 20 trys... with CloneCD it works fine...

Link to comment
Share on other sites

There isn't much I can say!

 

Your drive is erroring out as it tries to burn to the disc and I have no control over that, all I do is send it data to burn.

 

CloneCD always issues the command to perform OPC before it starts to send the commands to write the data, you could try enabling 'Perform OPC Before Write' in the settings (on the 'Write' tab) to see if that makes any difference.

 

Beyond that, this applies...

 

http://forum.imgburn.com/index.php?showtopic=8000

Link to comment
Share on other sites

FIFA 13 is an XGD3 game the tolal size is 8.13GB.. you need a maxburner drive to burn XGD3 games and when you Truncate you dont burn the secruity patched files, you must Overburn. Im asuming you have burned other Xbox games that were successfull and those were XGD2 games and those are 7.29 games

 

W 18:02:44 User accepted disc space warning and is attempting to truncate!

Link to comment
Share on other sites

you sayed to enablo OPC, but in same sites it says to disable it when trying to burning FIFA 13, wat is wat am trying to do, because of the "unauthorized disc" error

 

but if the OPC is enable at the beggining it will not allow to go to the write if it doesnt pass in it?

Link to comment
Share on other sites

FIFA 13 is an XGD3 game the tolal size is 8.13GB.. you need a maxburner drive to burn XGD3 games and when you Truncate you dont burn the secruity patched files, you must Overburn. Im asuming you have burned other Xbox games that were successfull and those were XGD2 games and those are 7.29 games

 

W 18:02:44 User accepted disc space warning and is attempting to truncate!

 

with XGD3 games i have the experience, that why with clonecd i choose the burn until the end of the disc... and i have a Lite-On with LT3.0

Link to comment
Share on other sites

Only enable OPC when you write at 4x apeed and disable it at the write speed at 2.4x write speed. (The 'Liteon iHAS 324 B' does not allow 2.4x write speed)

 

The Light Tought 3.0 (LT 3.0) is the firmware of the Xboxs DVD drive for reading copied/burned games.

 

When you use ClondCD and ' burn until the end of the disc' it only 'Truncates'

 

'Truncate' wont work when you play the game in the xbox

Edited by Adrianvdh
Link to comment
Share on other sites

 Share

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.