TC1968 Posted May 16, 2014 Share Posted May 16, 2014 I can't reply to the other Device Not Ready thread so please forgive me ahead of time for posting this one I have the same problem as the other poster did. I keep getting this message when I try and burn a disc I 21:55:28 ImgBurn Version 2.4.4.0 started! I 21:55:28 Microsoft Windows ??? Home Edition (6.2, Build 9200) I 21:55:28 Total Physical Memory: 4,070,676 KB - Available: 2,265,916 KB I 21:55:28 Initialising SPTI... I 21:55:28 Searching for SCSI / ATAPI devices... I 21:55:31 Found 2 DVD±RW/RAMs and 1 Unknown! W 22:21:38 Device Removal Detected! I 22:21:38 Searching for SCSI / ATAPI devices... I 22:21:38 Found 1 DVD±RW/RAM and 1 Unknown! W 22:21:59 Device Arrival Detected! I 22:21:59 Searching for SCSI / ATAPI devices... I 22:22:00 Found 2 DVD±RW/RAMs and 1 Unknown! This started three days ago and its driving me nuts. I have been using dvd flick/image burn for a few months and have had no problems of any kind. I'm using Sony DVD-RW 120 min/4.7 GB (the standard walmart stuff). I opened up another package to make sure that I didn't get a bad batch and had the same problem. I've tried uninstalling and reinstalling dvdflick and even ran a lens cleaner and the problem persists. Any ideas? Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted May 16, 2014 Share Posted May 16, 2014 Install the current release of ImgBurn and copy ImgBurn.exe over from its program folder (normally C:\Program Files\ImgBurn) to DVDFlick's program folder (replacing the outdated version in there). When you've done that, post a new log please. Can your drive see other discs you put in it? Original CDs (i.e. Audio CDs), original DVDs (i.e. DVD Video discs) Link to comment Share on other sites More sharing options...
Recommended Posts