bradatan13 Posted February 8, 2016 Posted February 8, 2016 As the title suggests, i cannot burn on a dvd+rw single sided. Log: I 15:43:29 ImgBurn Version 2.5.8.0 started!I 15:43:29 Microsoft Windows 7 Ultimate Edition (6.1, Build 7601 : Service Pack 1)I 15:43:29 Total Physical Memory: 3,046,592 KiB - Available: 1,851,892 KiBI 15:43:29 Initialising SPTI...I 15:43:29 Searching for SCSI / ATAPI devices...I 15:44:47 -> Drive 1 - Info: Slimtype DVD A DS8A2L-A 7H63 (F:) (SATA)I 15:44:47 Found 1 DVD±RW/RAM!W 15:55:56 User accepted disc space warning and is attempting to underburn!I 15:55:56 Operation Started!I 15:55:56 Source File: E:\Jocuri\New Super Mario Bros Wii NTSC [[scrubbed & Patched]]\New Super Mario Bros Wii NTSC [[scrubbed & Patched]].isoI 15:55:56 Source File Sectors: 2,294,912 (MODE1/2048)I 15:55:56 Source File Size: 4,699,979,776 bytesI 15:55:56 Source File Volume Identifier: New SUPER MARIO BROS. WiiI 15:55:56 Source File File System(s): SpecialI 15:55:56 Destination Device: [1:0:0] Slimtype DVD A DS8A2L-A 7H63 (F:) (SATA)I 15:55:56 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-R03-04)I 15:55:56 Destination Media Supported Write Speeds: 2x, 4xI 15:55:56 Destination Media Sectors: 16,384,000I 15:55:56 Destination Media L0 Data Zone Capacity: 16,580,608 (Changeable: No)I 15:55:56 Write Mode: DVDI 15:55:56 Write Type: DAOI 15:55:56 Write Speed: 2xI 15:55:56 DVD+R DL Reserve Track: NoI 15:55:56 Link Size: AutoI 15:55:56 Lock Volume: YesI 15:55:56 Test Mode: NoI 15:55:56 OPC: NoI 15:55:56 BURN-Proof: EnabledW 15:55:57 Write Speed Miscompare! - Wanted: 2,770 KB/s (2x), Got: 3,324 KB/s (2.4x)I 15:55:57 Book Type Setting: N/A (Reason: Invalid Field in CDB)I 15:55:57 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: YesW 15:55:58 Optimal layer break position is such that L0 < L1.W 15:55:58 Image Size: 2,294,912W 15:55:58 Optimal L0 Sectors: 16,580,608W 15:55:58 Calculated L1 Sectors: 4,280,681,600W 15:55:59 Optimal layer break position is such that all data will be written on L0.W 15:55:59 Image Size: 2,294,912W 15:55:59 Optimal L0 Sectors: 16,580,608I 15:55:59 Optimal L0 Data Zone Capacity: 16,580,608I 15:55:59 Optimal L0 Data Zone Method: Fixed LBAI 15:55:59 L0 Data Zone Capacity - Effective: 16,580,608I 15:56:01 Filling Buffer... (80 MiB)I 15:56:02 Writing LeadIn...I 15:56:31 Writing Session 1 of 1... (1 Track, LBA: 0 - 2294911)I 15:56:31 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 2294911)I 16:20:49 Synchronising Cache...I 16:21:09 Closing Track...I 16:21:11 Finalising Disc...W 16:22:22 Potential 'WaitImmediateIO' Deferred Error - (99%, 0/3) - Write ErrorW 16:22:22 Finalise Disc Failed! - Reason: Write ErrorW 16:22:22 Retrying (1 of 3)...W 16:23:33 Potential 'WaitImmediateIO' Deferred Error - (99%, 0/3) - Write ErrorW 16:23:33 Retry Failed - Reason: Write ErrorW 16:23:33 Retrying (2 of 3)...W 16:24:43 Potential 'WaitImmediateIO' Deferred Error - (99%, 0/3) - Write ErrorW 16:24:43 Retry Failed - Reason: Write ErrorW 16:24:43 Retrying (3 of 3)...W 16:26:05 Potential 'WaitImmediateIO' Deferred Error - (99%, 0/3) - Write ErrorW 16:26:05 Retry Failed - Reason: Write ErrorE 16:26:10 Finalise Disc Failed! - Reason: Write ErrorI 16:26:10 Finalising Disc (Last Attempt!)...E 16:27:21 Finalise Disc Failed! - Reason: Session Fixation Error Writing Lead OutE 16:27:21 Failed to Write Image!I 16:27:21 Exporting Graph Data...I 16:27:21 Graph Data File: E:\Users\Luca\AppData\Roaming\ImgBurn\Graph Data Files\Slimtype_DVD_A_DS8A2L-A_7H63_MONDAY-FEBRUARY-08-2016_3-55_PM_RICOHJPN-R03-04_2x.ibgI 16:27:21 Export Successfully Completed!E 16:27:21 Operation Failed! - Duration: 00:31:24I 16:27:21 Average Write Rate: 3,150 KiB/s (2.3x) - Maximum Write Rate: 3,283 KiB/s (2.4x) Anyone knows whats going on?
dbminter Posted February 8, 2016 Posted February 8, 2016 You're not burning a single sided DVD+RW. You're burning a dual layer DVD+R DL. I 15:55:56 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-R03-04) However, it does appear you're trying to burn an image with the size of a single layer DVD to it. I don't know why you're doing this as a single layer DVD-R/DVD+R is cheaper. As for why you're getting the error message, it's most likely down to some combination of your drive not liking RICOHJPN-R03-04. The only reliable DVD+R DL media is Verbatim DataLife Plus MKM discs. Nearly all the other kinds are junk. They tend to cause most of the problems people have with DVD+R DL. I, however, have come across TDK DVD+R DL that appeared to be good. I've learned Ritek DVD+R DL isn't, from experience. Ricoh and Ritek are essentially the same thing.
bradatan13 Posted February 8, 2016 Author Posted February 8, 2016 You're not burning a single sided DVD+RW. You're burning a dual layer DVD+R DL. I 15:55:56 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-R03-04) However, it does appear you're trying to burn an image with the size of a single layer DVD to it. I don't know why you're doing this as a single layer DVD-R/DVD+R is cheaper. As for why you're getting the error message, it's most likely down to some combination of your drive not liking RICOHJPN-R03-04. The only reliable DVD+R DL media is Verbatim DataLife Plus MKM discs. Nearly all the other kinds are junk. They tend to cause most of the problems people have with DVD+R DL. I, however, have come across TDK DVD+R DL that appeared to be good. I've learned Ritek DVD+R DL isn't, from experience. Ricoh and Ritek are essentially the same thing. Actually its single sided, but imgburn isnt reading it as it is. I could say EXACTLY what the cover says. K Classic DVD+R up to 16.0x Speed 4.7 GB Data 120 Min. Video Standard Play Single sided RW DVD+R I also quoted the caps. Exactly.
dbminter Posted February 8, 2016 Posted February 8, 2016 If ImgBurn is returning information counter to the cover text, then the problem is either the cover text is wrong, your drive is returning the incorrect parameters for that disc, or the disc was incorrectly manufactured with the wrong implementation ID's. Anyway, that's the problem. The disc is being detected as a DVD+R DL. RICOHJPN-R03-04 is DVD+R. I Googled it. First thing I'd try is updating the firmware of the drive, see if there's a new revision that might fix this. In Write mode, right click on the drive letter in the destination drop down and select the last option to check for new firmware. If you have a second DVD burner, try this same disc in that burner and in Write mode, check the data in the right window to see if the media type still says DVD+R DL. Now, it could be the burner in question. I notice it says it's a slim drive. Slim drives are notoriously error prone. Try a full size drive.
Recommended Posts