DVD+R Burn Fails

[Startropic1]

I made an ISO/burned it with ImgBurn setting the book type to DVD-ROM. (for bitsetting)

 

On verify ImgBurn gives me this error:

I/O Error!

 

Device: [1:1:0] SONY DVD RW DRU-710A BYX5 (H (ATA)

ScsiStatus: 0x02

Interpretation: Check Condition

CDB: 28 00 00 00 00 04 00 00 01 00

Interpretation: Read (10) - sector: 4

Sense Area: 70 00 03 00 00 00 00 0A 00 00 00 00 11 05 00 00 00 00

Interpretation: L-EC Uncorrectable Error

 

The disc (which is another DVD+R) is readable on my burner drive, but not on my DVD-ROM drive.

[polopony]

usually when they dont verify its crap media. If you post a log then we can see what you're using .not the brand but the dye type .You can put a blank dvd in the burner and copy and paste the info in the box to your next post looks like this, these are Verbatim along with Taiyo Yuden they're the best all else is crap

 

Physical Format Information (ADIP):

Disc ID: MCC-004-00

Book Type: DVD+R

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 1

[Startropic1]

They're Memorex 8x DVD+Rs

Here's the specs:

Physical Format Information (ADIP):

Disc ID: CMC MAG-E01-00

Book Type: DVD+R

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 1

Track Path: Parallel Track Path (PTP)

Linear Density: 0.267 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 2,491,711

Last Physical Sector in Layer 0: 0

[kevdriver]

Disc ID: CMC MAG-E01-00 As Polo was saying above, crap media. Get some Verbatim or Taio Yudens.

[polopony]

Disc ID: CMC MAG-E01-00

 

Like Kev says they're real junk ,I would bet that about 90% of the failures we see or other errors are due to people using CMC MAG based stuff . You can go to www.digitalfaq.com and do some reading on blank dvd quality