Startropic1 Posted October 20, 2006 Share Posted October 20, 2006 I made an ISO/burned it with ImgBurn setting the book type to DVD-ROM. (for bitsetting) On verify ImgBurn gives me this error: I/O Error! Device: [1:1:0] SONY DVD RW DRU-710A BYX5 (H (ATA) ScsiStatus: 0x02 Interpretation: Check Condition CDB: 28 00 00 00 00 04 00 00 01 00 Interpretation: Read (10) - sector: 4 Sense Area: 70 00 03 00 00 00 00 0A 00 00 00 00 11 05 00 00 00 00 Interpretation: L-EC Uncorrectable Error The disc (which is another DVD+R) is readable on my burner drive, but not on my DVD-ROM drive. Link to comment Share on other sites More sharing options...
polopony Posted October 21, 2006 Share Posted October 21, 2006 usually when they dont verify its crap media. If you post a log then we can see what you're using .not the brand but the dye type .You can put a blank dvd in the burner and copy and paste the info in the box to your next post looks like this, these are Verbatim along with Taiyo Yuden they're the best all else is crap Physical Format Information (ADIP): Disc ID: MCC-004-00 Book Type: DVD+R Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 1 Link to comment Share on other sites More sharing options...
Startropic1 Posted October 21, 2006 Author Share Posted October 21, 2006 They're Memorex 8x DVD+Rs Here's the specs: Physical Format Information (ADIP): Disc ID: CMC MAG-E01-00 Book Type: DVD+R Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 1 Track Path: Parallel Track Path (PTP) Linear Density: 0.267 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 2,491,711 Last Physical Sector in Layer 0: 0 Link to comment Share on other sites More sharing options...
kevdriver Posted October 21, 2006 Share Posted October 21, 2006 Disc ID: CMC MAG-E01-00 As Polo was saying above, crap media. Get some Verbatim or Taio Yudens. Link to comment Share on other sites More sharing options...
polopony Posted October 21, 2006 Share Posted October 21, 2006 Disc ID: CMC MAG-E01-00 Like Kev says they're real junk ,I would bet that about 90% of the failures we see or other errors are due to people using CMC MAG based stuff . You can go to www.digitalfaq.com and do some reading on blank dvd quality Link to comment Share on other sites More sharing options...
Recommended Posts