marsbarbabe Posted November 3, 2005 Posted November 3, 2005 Hello, Not used ImgBurn yet - but stumbled upon this site whilst looking for best and easiest way to burn a DL DVD-R. I understand lightening's nice app can only burn an iso (and I will in future rip DVDs as an iso). BUT for the time being I have my DVD9 film in VIDEO_TS and AUDIO_TS folders. After looking through the posts on this forum I have seen no less than THREE different apps mentioned to convert my 'folders' into a suitable .iso Which one of these three is recommended and is most likely to work with ImgBurn? I have a pioneer 110D drive and Verbatim DL DVD-Rs Oh and btw is ImgBurn likely to burn DVD folders in the future? Thanks. MBB PS - Glad to see your still 'out n about' helping the world Lightning UK!
cornholio7 Posted November 4, 2005 Posted November 4, 2005 if i compress a film with dvd shrink , i usually let it make the iso . if i use dvd rebuilder then i use imgtool by coujo to build the iso. i'm sure there will be other input
l8nights Posted November 4, 2005 Posted November 4, 2005 @ marsbarbabe using dl disk's your best bet I'd say would be the imgtools app by coujo
dontasciime Posted November 4, 2005 Posted November 4, 2005 (edited) folder 2 iso would not be suited to this task, as you wil only end up with a dvd rom iso that when burnt, would probably not play in your dvd player, unless your dvd player has a folder option and can play unauthored dvds, though technically they have been authored, but your dvd player would have to be able to play from folders as a couple of mine can. So your best bet would be to use either what cornholio7 or l8nights said Edited November 4, 2005 by dontasciime
marsbarbabe Posted November 4, 2005 Author Posted November 4, 2005 looks like imgtool is the best then. I'll have a proper look when everyone's in bed tonight. Thanks chaps btw is there a FAQ oro guide for imgtool - or is it really easy to use? cheers MBB
cornholio7 Posted November 4, 2005 Posted November 4, 2005 its very easy to use . but take a look here anyway http://www.coujo.de/ib2/index.php?act=modu...e=classic_usage
blutach Posted November 9, 2005 Posted November 9, 2005 PgcEdit uses the same engine (mkisofs) as ImgToolClassic - which IMHO has always been the best way to go. PgcEdit enables you to leave 32k gaps between small titlesets, which can be a benefit if the IFO gets damaged. Regards
Recommended Posts