ozdoug Posted November 7, 2018 Posted November 7, 2018 Hi Folks! I'm new to ImgBurn & so far have just been playing around to create simple music disks for the car. The issue I have is how to burn the tracks on to the CD in the order I have chosen? After I have loaded the files in to the 'Source' box I then expand it & move them aup/down for my chosen order. Example below: However when I burn them they still come out in alphabetical order. I have a good look through the various menus & options but cannot seem to find why this is happening....... Any help would be appreciated!
ItsTime2Split Posted November 7, 2018 Posted November 7, 2018 You are doing EVERYTHING the wrong way. You're just burning the raw MP3s to the CD, which won't work unless the CD player in your car supports MP3 out-of-the-box. What you actually have to do is go to Tools > Create CUE File, compile the playlist, burn it and voila. There is a forum topic about this, found here.
dbminter Posted November 7, 2018 Posted November 7, 2018 What you've created is just a data CD with MP3's on it. If your player supports playing MP3 files from the disc, it will play them, but they will be displayed in alphabetical order because that's how they're arranged on the disc. As the other poster said, you'll want to create a CUE file. That's the only way to create a standard audio CD that will play as a music CD. And that will create the tracks on the CD in the order you place them.
ozdoug Posted November 7, 2018 Author Posted November 7, 2018 Very many thanks dbminter & IT2S! I confess I have basically been using the default settings after I had installed ImgBurn but had managed to work out how to get the song titles on to the tracks. I like the software but find there are a LOT of options to have to wade through!! I will try to find the tutorial on CUE files & have another go! Again many thanks!!
ozdoug Posted November 8, 2018 Author Posted November 8, 2018 Tutorial: Read. Disk: Done!! Thanks again folks!!!
cholla Posted November 8, 2018 Posted November 8, 2018 I'm a little late for helping but thought I would include what I had worked on for this. It might help someone searching. For a data CD this part is the same. You need to setup the music files numerically to keep them in order. ( This is my test mix for ImgBurn . Of course leave out the .CUE file) If they were all .MP3 files you could put 7 or 8 complete CDs on a CD -R. Providing your player will play a data disc. If you want an Audio CD the numeric order is still the same but you need to create a .cue file. This is the one I created from the files above: Quote TITLE "Mix" PERFORMER "Multiple" FILE "01 - Uneasy Rider.aac" AAC REM FILE-DECODED-SIZE 05:20:61 TRACK 01 AUDIO TITLE "01 - Uneasy Rider" INDEX 01 00:00:00 FILE "02 - Long Haired Country Boy.flac" FLAC REM FILE-DECODED-SIZE 04:03:20 TRACK 02 AUDIO PREGAP 00:02:00 TITLE "02 - Long Haired Country Boy" INDEX 01 00:00:00 FILE "03 - The South's Gonna Do It.mp3" MP3 REM FILE-DECODED-SIZE 03:59:55 TRACK 03 AUDIO PREGAP 00:02:00 TITLE "03 - The South's Gonna Do It" INDEX 01 00:00:00 FILE "04 - The Devil Went Down To Georgia.ogg" OGG REM FILE-DECODED-SIZE 03:35:30 TRACK 04 AUDIO PREGAP 00:02:00 TITLE "04 - The Devil Went Down To Georgia" INDEX 01 00:00:00 FILE "05 - In America.ape" APE REM FILE-DECODED-SIZE 03:18:50 TRACK 05 AUDIO PREGAP 00:02:00 TITLE "05 - In America" INDEX 01 00:00:00 FILE "06 - Still In Saigon.wma" WMA REM FILE-DECODED-SIZE 03:52:60 TRACK 06 AUDIO PREGAP 00:02:00 TITLE "06 - Still In Saigon" INDEX 01 00:00:00 FILE "07 - Drinkin' My Baby Goodbye.flac" FLAC REM FILE-DECODED-SIZE 03:40:70 TRACK 07 AUDIO PREGAP 00:02:00 TITLE "07 - Drinkin' My Baby Goodbye" INDEX 01 00:00:00 FILE "08 - Uneasy Rider.m4a" M4A REM FILE-DECODED-SIZE 05:20:60 TRACK 08 AUDIO PREGAP 00:02:00 TITLE "08 - Uneasy Rider" INDEX 01 00:00:00 This is the burned Audio CD in WinAmp: As you can see the original order was kept.
dbminter Posted November 8, 2018 Posted November 8, 2018 (edited) BTW, if you wanted to make a data CD with the tracks in a particular order or an MP3 CD with another application, what you do is you add numbers to the start of each MP3's file name. For instance 01 - First File.MP3, 02 - Second File.MP3, etc. Oh, wait, I think Cholla just said that as part of that previous reply. Edited November 8, 2018 by dbminter
ozdoug Posted November 8, 2018 Author Posted November 8, 2018 dbminter, Yep that one I got at the start of my efforts, but I wanted to only have the song titles being displayed.....just trying to make it do what I wanted!! ....but all good now....Thanks again!!
Recommended Posts