TY02

[the olde]

burnt at max, now trying the same file at 4x

Edited December 1, 2006 by the olde

[polopony]

theres posts all over the place showing that quality drops off after 12X but man thats off a cliff ,I think most of the beta testers are happy with 8X and the quality is excellent

[spinningwheel]

I agree w/Polo...8X gives good quality burns on Verbatim and Taiyo Yuden discs...

[the olde]

the scan using the same media, same iso etc etc.

 

latest firmware, newish drive.

 

burnt at 4x setting and not max like the previous burn.

 

checked a couple of other discs burnt with IMGburn max setting, get the same awful result as my first post?

 

any ideas?

Edited December 3, 2006 by the olde

[polopony]

are you saying that between the max burn and the 4X burn you updated the firmware if this is so and you want to experiment then try another at max or 8X. Since you haven't posted a log(it should be mandatory) I'm not really sure what the supported write speeds are with your media/drive

 

Quick look at the graph shows the red line (write speed ) maxing out at 8X.

look at the speed 8X cav so its not really burned at 4x

Again a log would confirm all this stuff like max write speed and average

[cornholio7]

the red line in the above graph is read speed polo, only in an ibg can you see the write speed

[polopony]

of course alog would have been nice

[cornholio7]

 

this any good?

[Martin H]

LMFAO

 

Good one cornholio7

[chewy]

BENQ DVD DD DW1650 BCIC (ATA)

Current Profile: DVD-R

 

Disc Information:

Status: Empty

Erasable: No

Free Sectors: 2,298,496

Free Space: 4,707,319,808 bytes

Free Time: 510:48:46 (MM:SS:FF)

Supported Write Speeds: 2.4x, 4x, 8x

 

Pre-recorded Information:

Manufacturer ID: TYG02

or

BENQ DVD DD DW1650 BCIC (ATA)

Current Profile: DVD-R

 

Disc Information:

Status: Empty

Erasable: No

Free Sectors: 2,298,496

Free Space: 4,707,319,808 bytes

Free Time: 510:48:46 (MM:SS:FF)

Supported Write Speeds: 4x, 8x, 12x, 16x

 

Pre-recorded Information:

Manufacturer ID: TYG02

 

would be nice

[lfcrule1972]

I can only burn the TYG02's at 8x as that is all my BenQ and NEC show them at. I have never seen a graph like the one at the start of this topic with TYG02's tho.

[chewy]

for the benq turn on overspeed and turn off wopc, burn at 16x and you might get a bad graph, looks like his disks are faulty towards the outer

part

 

you can get some good spikes at 12x with the nec's and L&D's

modded firmwares

Edited December 4, 2006 by chewy

[lfcrule1972]

Thanks for the anti-tips chewy !