Burning ISO hangs at 11% Erasing Disc - Drive activity light not flashing

[fbagnato]

Hello,

I have just setup a new desktop computer.

It is running Windows 11 Version 25H2 Build 26200.8246 and ImgBurn 2.5.8.0.

The drive has the latest version of the firmware installed.

I was trying to burn an ISO to a Ritek DVD+RW and ImBurn said the disc needed to be formatted first.

The Erasing Disc then starts and the light on the Blu-ray Combo drive starts flashing but after some seconds stops flashing.

The progress starts counting up from 0% and reaches 11% but then stops there.

I left it running for over 30 minutes but the progress remainedl at 11%.

All this time the light on the drive does not flash at all.

I tried running the burn several times and also tried running ImgBurn in compatibility mode for Windows 8.

I also tried another Ritek DVD+RW disc and a Philips DVD+RW but the same problem occurred.

However, I was successful burning with a erase burning the ISO with a Ritek DVD-RW disc so the problem seems to be isolated to DVD+RW discs.

I can successfully burn the ISO using AShampoo Burning Studio Free so the problem is confined to ImgBurn.

A Google search of the problem suggests to Disable ImgBurn setting "Perform OPC before write" but I checked it and it is not enabled.

The saved log is attached.

Regards,

fbagnato

ImgBurn.log