GVJeeper Posted January 19, 2007 Posted January 19, 2007 I'm so frustrated. I've used RipIt4Me, DVD Decrypter, FIX, Shrink and ImgBurn on TWO different computers with the same result. The ISOs are created fine but when I burn I get the same result when I go to play them: my laptop says the disk isn't formatted and my TV DVD says it can't read the disk. I've posted at another site with all the backup suggestions (http://forums.afterdawn.com/thread_view.cfm/453074#2739594) and have tried them all with the same end result. Someone thought the disk was not being finalized and that I may have something checked or not checked in ImgBurn (?)...here's one of my logs: I 09:55:52 ImgBurn Version 2.1.0.0 started! I 09:55:52 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2) W 09:55:52 Drive D:\ (FAT32) does not support single files > 4 GB I 09:55:52 Initialising SPTI... I 09:55:52 Searching for SCSI / ATAPI devices... I 09:55:52 Found 1 DVD-ROM and 1 DVD?RW! I 09:56:22 Operation Started! I 09:56:22 Source File: C:\BASIC_INSTINCT.ISO I 09:56:22 Source File Sectors: 2,285,861 (MODE1/2048) I 09:56:22 Source File Size: 4,681,443,328 bytes I 09:56:22 Source File Volume Identifier: BASIC_INSTINCT I 09:56:22 Source File Implementation Identifier: DVD Shrink I 09:56:22 Source File File System(s): ISO9660, UDF (1.02) I 09:56:22 Destination Device: [1:0:0] PLEXTOR DVDR PX-740A 1.01 (E:) (ATA) I 09:56:22 Destination Media Type: DVD-R (Disc ID: FUJIFILM03) (Speeds: 2.4x, 4x, 8x) I 09:56:22 Destination Media Sectors: 2,298,496 I 09:56:22 Write Mode: DVD I 09:56:22 Write Type: DAO I 09:56:22 Write Speed: 8x I 09:56:22 Link Size: Auto I 09:56:22 Test Mode: Yes I 09:56:22 BURN-Proof: Enabled I 09:56:23 Filling Buffer... I 09:56:24 Writing LeadIn... I 09:56:29 Writing Image... W 09:58:36 Waiting for buffers to recover... W 09:58:50 Waiting for hard disk activity to reach threshold level... I 09:58:51 Writing Image... W 09:59:03 Waiting for buffers to recover... W 09:59:09 Waiting for hard disk activity to reach threshold level... I 09:59:10 Writing Image... W 09:59:18 Waiting for buffers to recover... W 09:59:21 Waiting for hard disk activity to reach threshold level... I 09:59:22 Writing Image... I 10:04:24 Synchronising Cache... I 10:04:53 Cycling Tray after Test Write... I 10:04:58 Image MD5: afabc7938d2ef33b4f90f31324c654da I 10:04:58 Operation Successfully Completed! - Duration: 00:08:35 I 10:04:58 Average Write Rate: 9,624 KB/s (6.9x) - Maximum Write Rate: 11,106 KB/s (8.0x) I 15:24:21 Operation Started! I 15:24:21 Source File: C:\BASIC_INSTINCT.ISO I 15:24:21 Source File Sectors: 2,285,861 (MODE1/2048) I 15:24:21 Source File Size: 4,681,443,328 bytes I 15:24:21 Source File Volume Identifier: BASIC_INSTINCT I 15:24:21 Source File Implementation Identifier: DVD Shrink I 15:24:21 Source File File System(s): ISO9660, UDF (1.02) I 15:24:21 Destination Device: [1:0:0] PLEXTOR DVDR PX-740A 1.01 (E:) (ATA) I 15:24:21 Destination Media Type: DVD-R (Disc ID: FUJIFILM03) (Speeds: 2.4x, 4x, 8x) I 15:24:21 Destination Media Sectors: 2,298,496 I 15:24:21 Write Mode: DVD I 15:24:21 Write Type: DAO I 15:24:21 Write Speed: 8x I 15:24:21 Link Size: Auto I 15:24:21 Test Mode: Yes I 15:24:21 BURN-Proof: Enabled I 15:24:21 Filling Buffer... I 15:24:22 Writing LeadIn... I 15:24:27 Writing Image... W 15:26:34 Waiting for buffers to recover... W 15:26:48 Waiting for hard disk activity to reach threshold level... I 15:26:49 Writing Image... W 15:26:58 Waiting for buffers to recover... W 15:27:03 Waiting for hard disk activity to reach threshold level... I 15:27:05 Writing Image... W 15:27:13 Waiting for buffers to recover... W 15:27:16 Waiting for hard disk activity to reach threshold level... I 15:27:17 Writing Image... I 15:32:24 Synchronising Cache... I 15:32:53 Cycling Tray after Test Write... I 15:32:58 Image MD5: afabc7938d2ef33b4f90f31324c654da I 15:32:58 Operation Successfully Completed! - Duration: 00:08:37 I 15:32:58 Average Write Rate: 9,604 KB/s (6.9x) - Maximum Write Rate: 11,132 KB/s (8.0x) Any help is GREATLY APPRECIATE!! Thanks!!
cornholio7 Posted January 19, 2007 Posted January 19, 2007 try updating to the newest firmware here http://forum.rpc1.org/dl_firmware.php?download_id=2095 and turn verify on for the next burn
jack Posted January 19, 2007 Posted January 19, 2007 (edited) Maybe im being dense, but if you have test mode enabled is anything actually written to the disc? Edited January 19, 2007 by jack
Kenadjian Posted January 19, 2007 Posted January 19, 2007 I 09:56:22 Test Mode: Yes Lol, untick this option, you might get some data on the disc.
polopony Posted January 19, 2007 Posted January 19, 2007 Maybe im being dense, but if you have test mode enabled is anything actually written to the disc? test mode is a simulated burn and doesn't actually burn anything to a disc .I think without really knowing how this program works you've gone and messed with the settings so do this TOOLS ---> SETTINGS ---> DEFAULTS IMGburn works best with its default settings ,then burn your ISO and you'll be OK
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now