leftee Posted January 29, 2007 Share Posted January 29, 2007 I'm new to using Imageburn after having used burnatonce for a long time. I just tried to burn a DVD and at the verify stage it's giving me uncorrectable errors. I stopped after about the fifth one figuring. Im using a Plextor 408-A burner with Dynex DVD-R for a SL burn. I've attached the log file. Any suggestions thanks ImgBurn.log Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted January 29, 2007 Share Posted January 29, 2007 Your firmware is ancient! You're on 1.03, the latest is 1.12. http://www.plextor.be/technicalservices/do...e=DVD-Recorders Update and then try again. You might well find it still fails to burn that Ritek media properly... RitekF1 aren't what I'd call 'decent' discs. See if you can find some Verbatim (MCC dye) or Taiyo Yuden discs to use instead. Link to comment Share on other sites More sharing options...
leftee Posted January 29, 2007 Author Share Posted January 29, 2007 LIGHTNING UK thanks a bunch for the fix. The firmware did the trick. It worked even with the not so good Ritek media. I am going to invest in some verbatim media though. I have heard from other sources as well that its superior. Hard to find though in my area in brick and mortar shops. Anyway, thanks again. leftee Link to comment Share on other sites More sharing options...
lfcrule1972 Posted January 30, 2007 Share Posted January 30, 2007 Online stores are the best place to get Verbatims most times: In the UK/Europe you can get them from www.svp.co.uk In the US you can try www.meritline.com Link to comment Share on other sites More sharing options...
Recommended Posts