drbesty Posted March 8, 2007 Share Posted March 8, 2007 Up until a few weeks ago everything has been fine, however recently I've been having a few problems. I'm using the same media (Traxdata) as I always have, but the burn always stops at about 57%. I 23:39:05 ImgBurn Version 2.2.0.0 started! I 23:39:05 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 23:39:05 Total Physical Memory: 1,048,044 KB - Available: 659,096 KB I 23:39:05 Initialising ElbyCDIO... I 23:39:05 ELBYCDIO.DLL - Elaborate Bytes CDRTools - ElbyCDIO DLL - Version 6.0.5.1 I 23:39:05 Searching for SCSI / ATAPI devices... I 23:39:06 Found 1 DVD-ROM and 2 DVD?RWs! I 23:39:28 Operation Started! I 23:39:28 Source File: F:\msgid_2331608_Crackdown_(PAL)_(Xbox360)[1]\IMAGE.dvd I 23:39:28 Source File Sectors: 3,697,696 (MODE1/2048) I 23:39:28 Source File Size: 7,572,881,408 bytes I 23:39:28 Source File Volume Identifier: XBOX360 I 23:39:28 Source File Implementation Identifier: Daikin U.S. Comtec Lab I 23:39:28 Source File File System(s): ISO9660, UDF (1.02) I 23:39:28 Destination Device: [3:0:0] PIONEER DVD-RW DVR-111D 1.29 (K:) (ATA) I 23:39:28 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-01) (Speeds: 2.4x, 4x, 6x, 8x) I 23:39:28 Destination Media Sectors: 4,173,824 I 23:39:28 Write Mode: DVD I 23:39:28 Write Type: DAO I 23:39:28 Write Speed: 2.4x I 23:39:28 Link Size: Auto I 23:39:28 Test Mode: No I 23:39:28 BURN-Proof: Enabled I 23:39:28 Optimal L0 Data Zone Capacity: 1,913,760 I 23:39:28 Optimal L0 Data Zone Method: Copied From Original Disc I 23:39:54 Filling Buffer... (20 MB) I 23:39:54 Writing LeadIn... I 23:39:56 Writing Image... I 23:39:56 Writing Layer 0... (LBA: 0 - 1913759) I 00:00:01 Writing Layer 1... (LBA: 1913760 - 3697695) W 00:00:24 Failed to Write Sectors 1923280 - 1923295 - Write Error W 00:00:24 Retrying (1 of 20)... W 00:00:29 Retry Failed - Invalid Address For Write W 00:00:29 Retrying (2 of 20)... W 00:00:29 Retry Failed - Invalid Address For Write W 00:00:29 Retrying (3 of 20)... W 00:00:29 Retry Failed - Invalid Address For Write W 00:00:29 Retrying (4 of 20)... W 00:00:29 Retry Failed - Invalid Address For Write W 00:00:29 Retrying (5 of 20)... W 00:00:29 Retry Failed - Invalid Address For Write W 00:00:29 Retrying (6 of 20)... W 00:00:29 Retry Failed - Invalid Address For Write W 00:00:29 Retrying (7 of 20)... W 00:00:29 Retry Failed - Invalid Address For Write W 00:00:29 Retrying (8 of 20)... W 00:00:29 Retry Failed - Invalid Address For Write W 00:00:29 Retrying (9 of 20)... W 00:00:29 Retry Failed - Invalid Address For Write W 00:00:29 Retrying (10 of 20)... W 00:00:29 Retry Failed - Invalid Address For Write W 00:00:29 Retrying (11 of 20)... W 00:00:29 Retry Failed - Invalid Address For Write W 00:00:29 Retrying (12 of 20)... W 00:00:29 Retry Failed - Invalid Address For Write W 00:00:29 Retrying (13 of 20)... W 00:00:29 Retry Failed - Invalid Address For Write W 00:00:29 Retrying (14 of 20)... W 00:00:29 Retry Failed - Invalid Address For Write W 00:00:29 Retrying (15 of 20)... W 00:00:29 Retry Failed - Invalid Address For Write W 00:00:29 Retrying (16 of 20)... W 00:00:29 Retry Failed - Invalid Address For Write W 00:00:29 Retrying (17 of 20)... W 00:00:29 Retry Failed - Invalid Address For Write W 00:00:29 Retrying (18 of 20)... W 00:00:29 Retry Failed - Invalid Address For Write W 00:00:29 Retrying (19 of 20)... W 00:00:29 Retry Failed - Invalid Address For Write W 00:00:29 Retrying (20 of 20)... W 00:00:29 Retry Failed - Invalid Address For Write W 00:07:08 Retrying (21)... W 00:07:08 Retry Failed - Invalid Address For Write W 00:07:08 Retrying (22)... W 00:07:08 Retry Failed - Invalid Address For Write W 00:07:09 Retrying (23)... W 00:07:09 Retry Failed - Invalid Address For Write W 05:12:03 Retrying (24)... W 05:12:03 Retry Failed - Invalid Address For Write W 05:12:03 Retrying (25)... W 05:12:03 Retry Failed - Invalid Address For Write E 05:12:04 Failed to Write Sectors 1923280 - 1923295 - Write Error I 05:12:04 Synchronising Cache... I 05:12:05 Closing Track... W 05:12:23 Potential 'WaitImmediateIO' Deferred Error - (1/2) - Positioning Error Detected by Read of Medium W 05:12:36 Potential 'WaitImmediateIO' Deferred Error - (1/2) - Positioning Error Detected by Read of Medium E 05:12:38 Close Track Failed! - Reason: Positioning Error Detected by Read of Medium I 05:12:38 Closing Track (Last Attempt!)... I 05:12:42 Finalising Disc... W 05:13:39 Potential 'WaitImmediateIO' Deferred Error - (1/2) - Positioning Error Detected by Read of Medium E 08:46:59 Finalise Disc Failed! - Reason: Positioning Error Detected by Read of Medium I 08:46:59 Finalising Disc (Last Attempt!)... E 08:47:53 Finalise Disc Failed! - Reason: Positioning Error Detected by Read of Medium E 08:47:53 Failed to Write Image! E 08:47:53 Operation Failed! - Duration: 09:08:24 I 08:47:53 Average Write Rate: 193 KB/s (0.1x) - Maximum Write Rate: 3,426 KB/s (2.5x) I've even tried Philips media with the same result, even a different drive, I get the same result, any ideas? Link to comment Share on other sites More sharing options...
dontasciime Posted March 8, 2007 Share Posted March 8, 2007 Use better disc's. Verb. What kind of speeds are you getting burning to single layer, if they are low then uninstall your ide controller as per FAQ . 1ST get some verbatim + dual layers if it still does it then your problem is with drive or drivers, DMA etc Link to comment Share on other sites More sharing options...
lfcrule1972 Posted March 8, 2007 Share Posted March 8, 2007 I would definitely get Verbatim DVD+R DL's - I know you have been using this media ok up until now but this kind of failure is something we see in the forum with lower quality media. In many ways you are lucky to have had any run of successful burns Link to comment Share on other sites More sharing options...
drbesty Posted March 9, 2007 Author Share Posted March 9, 2007 Thing is I've burned more than 30 Traxdata disks without any problem, I only encountered problems after I installed the IMGBurn update. I've reset my drivers, still no luck, I've even tried a different DVD Writer. Link to comment Share on other sites More sharing options...
lfcrule1972 Posted March 9, 2007 Share Posted March 9, 2007 You don't have to believe us but I would bet a fair bit of money on it being the discs. We see all sorts of problems with DL burns when they are not Verbatims, look through the forum and you will see that most go away when using the Verbs. Link to comment Share on other sites More sharing options...
drbesty Posted March 9, 2007 Author Share Posted March 9, 2007 It's not that I don't believe you mate, just that I've had alot of successful burns with various media. I've uninstalled 2.2, re-installed 2.1 and it worked perfectly, twice, no errors, so I'll stick to what I know works, cheers for your help. Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted March 9, 2007 Share Posted March 9, 2007 Arrrrrrrrrrrrrrrrrrrrrrrrrrrrggggggggggggggggggggggggggggggggghhhhhhhhhhhhhhhhhh hhhhhhhhhhhhhhhhhhhh Link to comment Share on other sites More sharing options...
dontasciime Posted March 9, 2007 Share Posted March 9, 2007 Arrrrrrrrrrrrrrrrrrrrrrrrrrrrggggggggggggggggggggggggggggggggghhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh I can translate that FFS another one. It had nothing to do with going back to previous version of ImgBurn (it's still same code) unless very slim chance here that if say you used system restore and whatever was the real reason for your errors was elimated by system restore. But the main reason was (is) the inconsistency of the media your using. Link to comment Share on other sites More sharing options...
spinningwheel Posted March 9, 2007 Share Posted March 9, 2007 Take it from us....change your media to Verbatim DataLifePlus or Taiyo Yuden brands, if that still fails then we can go further. Because you acheived a few good burns on bad media is great, if the media doesn't loose the burn in a few months. We test all brands f MID and burners and only recommend what works. Link to comment Share on other sites More sharing options...
Recommended Posts