PegM_4 Posted March 23, 2007 Posted March 23, 2007 After using DVD Shrink, ImgBurn was creating a backup and seemed to have completed successfully the first 18% when I got the following msg. I have no idea what it means. This is my first experience in trying to backup a disk. I/O Error! Device: [5:0:0] PHILIPS DVD8801 GW02 (E:) (ATA) ScsiStatus: 0x02 Interpretation: Check Condition CBD: 2A 00 00 06 80 40 00 00 20 00 Interpretation: Write (10) - Sectors: 4260-48 - 426079 Sense Area: 71 00 03 00 00 00 00 12 00 00 00 00 0C 00 00 00 00 00 00 04 05 06 04 05 Interpretation: Write Error Any suggestions as to what went wrong and how to avoid it in the future? Thanks Peg
dontasciime Posted March 23, 2007 Posted March 23, 2007 what make of discs have you got, post the full log if your not sure.
PegM_4 Posted March 24, 2007 Author Posted March 24, 2007 what make of discs have you got, post the full log if your not sure. They are just some cheap ones I picked up. DVD-R Khypermedia Hyperm Is that what you mean? Does this make a difference?
jimbo160 Posted March 24, 2007 Posted March 24, 2007 what make of discs have you got, post the full log if your not sure. They are just some cheap ones I picked up. DVD-R Khypermedia Hyperm Is that what you mean? Does this make a difference? i to am getting the same error....it is the disc that i am trying to copy.......mmmmmmm. could there be something else that gives this error?
dontasciime Posted March 30, 2007 Posted March 30, 2007 if that media is crap, then it will make a big difference. If you get some decent media, taiyo yuden or verbatim try and post back to see if it does make a difference.
lfcrule1972 Posted March 30, 2007 Posted March 30, 2007 what make of discs have you got, post the full log if your not sure. They are just some cheap ones I picked up. DVD-R Khypermedia Hyperm Is that what you mean? Does this make a difference? i to am getting the same error....it is the disc that i am trying to copy.......mmmmmmm. could there be something else that gives this error? Depends - we can't help you copy discs that are Copyrighted....
dontasciime Posted March 30, 2007 Posted March 30, 2007 from the Little of the log you posted , you were trying to write a disc, so should have nothing to do with the data you got from the read mode or whatever means you took data off the original etc.
polopony Posted March 30, 2007 Posted March 30, 2007 what make of discs have you got, post the full log if your not sure. They are just some cheap ones I picked up. DVD-R Khypermedia Hyperm Is that what you mean? Does this make a difference? the quality of the media makes a huge difference those are cheap as you say not very good at all, we only reccommend Verbatim + and - and also Taiyo Yuden, they are top of the line but well worth it . All the other media is hit and miss FYI its nor the "brand " of disc thats important but who makes the dye that the discs are made with .You can find out who makes yours by putting a blank in the burner and IMGburn in write mode it'll look like this, these are Verbatim 16x - R discs , note the MCC code thats who makes the dye its the Mitsubishi Chemical Corp Disc Information: Status: Empty Erasable: No Free Sectors: 2,298,496 Free Space: 4,707,319,808 bytes Free Time: 510:48:46 (MM:SS:FF) Supported Write Speeds: 2x, 4x, 6x, 8x, 12x, 16x Pre-recorded Information: Manufacturer ID: MCC 03RG20 Physical Format Information (Last Recorded): Disc ID: 0@P-!-00 Book Type: DVD-R Part Version: 5 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 1 Track Path: Parallel Track Path (PTP) Linear Density: 0.267 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 2,495,103 Last Physical Sector in Layer 0: 0
Recommended Posts