I/O Error!

[PegM_4]

After using DVD Shrink, ImgBurn was creating a backup and seemed to have completed successfully the first 18% when I got the following msg. I have no idea what it means. This is my first experience in trying to backup a disk.

 

 

I/O Error!

 

Device: [5:0:0] PHILIPS DVD8801 GW02 (E:) (ATA)

 

ScsiStatus: 0x02

Interpretation: Check Condition

 

CBD: 2A 00 00 06 80 40 00 00 20 00

Interpretation: Write (10) - Sectors: 4260-48 - 426079

 

Sense Area: 71 00 03 00 00 00 00 12 00 00 00 00 0C 00 00 00 00 00 00 04 05 06 04 05

Interpretation: Write Error

 

Any suggestions as to what went wrong and how to avoid it in the future?

 

Thanks

Peg

[dontasciime]

what make of discs have you got, post the full log if your not sure.

[PegM_4]

what make of discs have you got, post the full log if your not sure.

 

They are just some cheap ones I picked up. DVD-R Khypermedia Hyperm Is that what you mean?

 

Does this make a difference?

[jimbo160]

what make of discs have you got, post the full log if your not sure.

 

They are just some cheap ones I picked up. DVD-R Khypermedia Hyperm Is that what you mean?

 

Does this make a difference?

i to am getting the same error....it is the disc that i am trying to copy.......mmmmmmm. could there be something else that gives this error?

[dontasciime]

if that media is crap, then it will make a big difference. If you get some decent media, taiyo yuden or verbatim try and post back to see if it does make a difference.

[lfcrule1972]

what make of discs have you got, post the full log if your not sure.

 

They are just some cheap ones I picked up. DVD-R Khypermedia Hyperm Is that what you mean?

 

Does this make a difference?

i to am getting the same error....it is the disc that i am trying to copy.......mmmmmmm. could there be something else that gives this error?

 

Depends - we can't help you copy discs that are Copyrighted....

[dontasciime]

from the Little of the log you posted , you were trying to write a disc, so should have nothing to do with the data you got from the read mode or whatever means you took data off the original etc.

[polopony]

what make of discs have you got, post the full log if your not sure.

 

They are just some cheap ones I picked up. DVD-R Khypermedia Hyperm Is that what you mean?

 

Does this make a difference?

 

the quality of the media makes a huge difference those are cheap as you say not very good at all, we only reccommend Verbatim + and - and also Taiyo Yuden, they are top of the line but well worth it . All the other media is hit and miss

 

FYI its nor the "brand " of disc thats important but who makes the dye that the discs are made with .You can find out who makes yours by putting a blank in the burner and IMGburn in write mode it'll look like this, these are Verbatim 16x - R discs , note the MCC code thats who makes the dye its the Mitsubishi Chemical Corp

 

Disc Information:

Status: Empty

Erasable: No

Free Sectors: 2,298,496

Free Space: 4,707,319,808 bytes

Free Time: 510:48:46 (MM:SS:FF)

Supported Write Speeds: 2x, 4x, 6x, 8x, 12x, 16x

 

Pre-recorded Information:

Manufacturer ID: MCC 03RG20

 

Physical Format Information (Last Recorded):

Disc ID: 0@P-!-00

Book Type: DVD-R

Part Version: 5

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 1

Track Path: Parallel Track Path (PTP)

Linear Density: 0.267 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 2,495,103

Last Physical Sector in Layer 0: 0