Letty Posted June 22, 2007 Share Posted June 22, 2007 Hi guys! Here is a problem. I'm trying to record some personal stuff to DVD+R DL (memorex. Yeah, I know verbatium and +R is better, but it was a gift). It's not a movie, just bunch of files - .avi, .rar etc. So I'm using "build" mode - and it creates .iso and .mds (on HDD), but doesn't propose me to choose a LB point (that window doesn't appear at all). Well, ok, decided to try any way. Recorded. Verification failed on 50%. BUT! All files open and seem to work ok on the dvd-rom I used for recording (pioneer 212D) and on elder dvd-rom (pioneer dvr-108) as well. Disk is a "backup" (or "storage") for PC only, not for home dvd players. So here are my questions: 1) why no LB point? Should it be like that or what do I miss? 2) should I trust this disk and say it's readable? Why verification failed? ImgBurn 2.3.2.0. Thanks in advance! Link to comment Share on other sites More sharing options...
mmalves Posted June 22, 2007 Share Posted June 22, 2007 You only need to select a layer break if there's DVD-Video content to be burnt. For normal data, it's calculated automatically. Please post the log from that burn (Help/ImgBurn logs), as it has important information that we could use. By the way, you can burn directly to media with Build mode (no need to build an ISO image first) by choosing 'Device' in the 'Output' menu Link to comment Share on other sites More sharing options...
kevdriver Posted June 22, 2007 Share Posted June 22, 2007 Letty, If you pick the MDS file to burn with IMGburn then all will be well as the MDS file contains the layerbreak info for your DL disc. The reason for the failed verify is most likely because that Memorex blank is dye type CMC MAG........ utter crap. Honestly mate, buy a verbatim DL blank and do the burn again, you will verify this time, 99.99999% for sure. Your burner couldn't read back the info it just burn't to the blank disc hence the verify failed message. As for the burn being readable, maybe, but guaranteed in about 6 months, it won't be because of the degradation of the cheaper memorex disc. We always reccommend Verbatim dual layers to burn to, there're the only ones that work proper...... Link to comment Share on other sites More sharing options...
Letty Posted June 22, 2007 Author Share Posted June 22, 2007 Thank you guys! Not sure where that log starts, I played with images before and after burning, I guess here it is: I 12:07:49 Operation Started! I 12:07:49 Source File: C:\Documents and Settings\Me\Desktop\USSRMovies.mds I 12:07:49 Source File Sectors: 4,154,544 (MODE1/2048) I 12:07:49 Source File Size: 8,508,506,112 bytes I 12:07:49 Source File Volume Identifier: USSRMovies I 12:07:49 Source File Application Identifier: IMGBURN V2.3.2.0 - THE ULTIMATE IMAGE BURNER! I 12:07:49 Source File Implementation Identifier: ImgBurn I 12:07:49 Source File File System(s): ISO9660, UDF (1.02) I 12:07:49 Destination Device: [1:0:0] PIONEER DVD-RW DVR-212D 1.15 (E:) (ATA) I 12:07:49 Destination Media Type: DVD+R DL (Disc ID: RITEK-D01-01) (Speeds: 2.4x) I 12:07:49 Destination Media Sectors: 4,173,824 I 12:07:49 Write Mode: DVD I 12:07:49 Write Type: DAO I 12:07:49 Write Speed: 2.4x I 12:07:49 Link Size: Auto I 12:07:49 Test Mode: No I 12:07:49 BURN-Proof: Enabled I 12:07:50 Optimal L0 Data Zone Capacity: 2,077,280 I 12:07:50 Optimal L0 Data Zone Method: ECC Block Boundary I 12:08:14 Filling Buffer... (40 MB) I 12:08:14 Writing LeadIn... I 12:08:16 Writing Image... (LBA: 0 - 4154543) I 12:08:16 Writing Layer 0... (LBA: 0 - 2077279) I 12:30:04 Writing Layer 1... (LBA: 2077280 - 4154543) I 12:52:30 Synchronising Cache... I 12:52:31 Closing Track... I 12:52:32 Finalising Disc... I 12:53:39 Image MD5: 85698cc3014b51537e4534e88fb6a0b2 I 12:53:39 Operation Successfully Completed! - Duration: 00:45:50 I 12:53:39 Average Write Rate: 3,130 KB/s (2.3x) - Maximum Write Rate: 3,360 KB/s (2.4x) I 12:53:39 Cycling Tray before Verify... I 12:54:08 Device Ready! I 12:54:08 Operation Started! I 12:54:08 Source Device: [1:0:0] PIONEER DVD-RW DVR-212D 1.15 (E:) (ATA) I 12:54:08 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: RITEK-D01-01) (Speeds: 2.4x) I 12:54:08 Image File: C:\Documents and Settings\Me\Desktop\USSRMovies.mds I 12:54:08 Image File Sectors: 4,154,544 (MODE1/2048) I 12:54:08 Image File Size: 8,508,506,112 bytes I 12:54:08 Image File Volume Identifier: USSRMovies I 12:54:08 Image File Application Identifier: IMGBURN V2.3.2.0 - THE ULTIMATE IMAGE BURNER! I 12:54:08 Image File Implementation Identifier: ImgBurn I 12:54:08 Image File File System(s): ISO9660, UDF (1.02) I 12:54:08 Verifying Sectors... (LBA: 0 - 4154543) I 12:54:08 Verifying Layer 0... (LBA: 0 - 2077279) I 13:03:51 Verifying Layer 1... (LBA: 2077280 - 4154543) W 13:04:20 Failed to Read Sector 2077280 - L-EC Uncorrectable Error W 13:04:20 Sector 2077280 maps to File: Film3.avi E 13:04:30 Failed to Read Sector 2077281 - L-EC Uncorrectable Error E 13:04:30 Sector 2077281 maps to File: Film3.avi E 13:04:30 Failed to Verify Sectors! E 13:04:30 Operation Failed! - Duration: 00:10:22 I 13:04:30 Average Verify Rate: 6,679 KB/s (4.8x) - Maximum Verify Rate: 10,524 KB/s (7.6x) I 13:04:36 Close Request Acknowledged I 13:04:36 Closing Down... I 13:04:37 Shutting down SPTI... I 13:04:37 ImgBurn closed! PS: my, I still have 9 memorex DLs well, they go under my coffee cup I guess Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted June 22, 2007 Share Posted June 22, 2007 Try the 1.21 firmware update. After that, yeah, consider them to be coasters Link to comment Share on other sites More sharing options...
Recommended Posts