PiLO Posted August 10, 2007 Share Posted August 10, 2007 Hi there, i have a Samsung SH-S183A (S-ATA Burner) plugged to Nvidia S-ATA Controller Port 3 on my Asus A8N Sli Deluxe. Port 1 & 2 of this Controller are used for Raid-0 of two identical drives. To my problem: Yesterday i got my first DL media (Verbatim DVD+R DL 2,4 / MKM-001-00 / Made in India). I burned the first disc with the latest DVD-Decrypter (3.5.4.0) at 2,4 (higher speed wasn't possible) and it worked without problems. Then i realised that ImgBurn is made by the same developer as the outdated DVD-Decrypter and i installed the latest version of this app. When i started it i got an error like "DeviceIOControl (IOCTL_STORAGE_MCN_CONTROL) failed!". I ignored that but i have to mention that i don't got this error in DVD-Decrypter before but after installing ImgBurn it was also present in DVD-Decrypter. Then i started to burn my second DL Disc and here is the log: I 17:41:12 ImgBurn Version 2.3.2.0 started! I 17:41:12 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 17:41:12 Total Physical Memory: 1.048.032 KB - Available: 703.116 KB I 17:41:12 Initialising SPTI... I 17:41:12 Searching for SCSI / ATAPI devices... I 17:41:12 Found 1 DVD-ROM and 1 DVD±RW/RAM! W 17:44:13 'Disable Media Change Notification' has been changed! W 17:44:30 'Disable Media Change Notification' has been changed! I 17:45:35 Operation Started! I 17:45:35 Source File: G:\amp-nik42.iso I 17:45:35 Source File Sectors: 3.943.408 (MODE1/2048) I 17:45:35 Source File Size: 8.076.099.584 bytes I 17:45:35 Source File Volume Identifier: Disc 2 I 17:45:35 Source File Application Identifier: TOAST ISO 9660 BUILDER COPYRIGHT (C) 1997-2005 SONIC SOLUTIONS - HAVE A NICE DAY I 17:45:35 Source File File System(s): ISO9660; Joliet I 17:45:35 Destination Device: [4:0:0] TSSTcorp CD/DVDW SH-S183A SB03 (F:) (ATA) I 17:45:35 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2,4x) I 17:45:35 Destination Media Sectors: 4.173.824 I 17:45:35 Write Mode: DVD I 17:45:35 Write Type: DAO I 17:45:35 Write Speed: 8x I 17:45:35 Link Size: Auto I 17:45:35 Test Mode: No I 17:45:35 BURN-Proof: Enabled W 17:45:35 DeviceIoControl(IOCTL_STORAGE_MCN_CONTROL) Failed! - Media change notification has NOT been disabled. I 17:45:35 Optimal L0 Data Zone Capacity: 1.971.712 I 17:45:35 Optimal L0 Data Zone Method: ECC Block Boundary I 17:46:13 Filling Buffer... (40 MB) I 17:46:14 Writing LeadIn... I 17:46:17 Writing Image... (LBA: 0 - 3943407) I 17:46:17 Writing Layer 0... (LBA: 0 - 1971711) W 17:47:44 Failed to Write Sectors 144224 - 144255 - Logical Unit Communication CRC Error (ULTRA-DMA/32) W 17:47:44 Retrying (1 of 20)... W 17:47:46 Retry Failed - Invalid Address For Write W 17:47:46 Retrying (2 of 20)... W 17:47:46 Retry Failed - Invalid Address For Write W 17:47:46 Retrying (3 of 20)... W 17:47:46 Retry Failed - Invalid Address For Write W 17:47:46 Retrying (4 of 20)... W 17:47:46 Retry Failed - Invalid Address For Write W 17:47:46 Retrying (5 of 20)... W 17:47:46 Retry Failed - Invalid Address For Write W 17:47:46 Retrying (6 of 20)... W 17:47:46 Retry Failed - Invalid Address For Write W 17:47:46 Retrying (7 of 20)... W 17:47:46 Retry Failed - Invalid Address For Write W 17:47:46 Retrying (8 of 20)... W 17:47:46 Retry Failed - Invalid Address For Write W 17:47:46 Retrying (9 of 20)... W 17:47:46 Retry Failed - Invalid Address For Write W 17:47:46 Retrying (10 of 20)... W 17:47:46 Retry Failed - Invalid Address For Write W 17:47:46 Retrying (11 of 20)... W 17:47:46 Retry Failed - Invalid Address For Write W 17:47:46 Retrying (12 of 20)... W 17:47:46 Retry Failed - Invalid Address For Write W 17:47:46 Retrying (13 of 20)... W 17:47:46 Retry Failed - Invalid Address For Write W 17:47:46 Retrying (14 of 20)... W 17:47:46 Retry Failed - Invalid Address For Write W 17:47:46 Retrying (15 of 20)... W 17:47:46 Retry Failed - Invalid Address For Write W 17:47:46 Retrying (16 of 20)... W 17:47:46 Retry Failed - Invalid Address For Write W 17:47:46 Retrying (17 of 20)... W 17:47:46 Retry Failed - Invalid Address For Write W 17:47:46 Retrying (18 of 20)... W 17:47:46 Retry Failed - Invalid Address For Write W 17:47:46 Retrying (19 of 20)... W 17:47:46 Retry Failed - Invalid Address For Write W 17:47:46 Retrying (20 of 20)... W 17:47:46 Retry Failed - Invalid Address For Write E 17:48:32 Failed to Write Sectors 144224 - 144255 - Logical Unit Communication CRC Error (ULTRA-DMA/32) I 17:48:32 Synchronising Cache... I 17:48:33 Closing Track... I 17:48:35 Finalising Disc... "Finalising Disc..." stops at 99% and i have to close ImgBurn by Taskmanager and the drive is locked (and still working) until i reset my pc. Then i tried another burn with DVD-Decrypter but there i now got the same problems. Burning of Single Layer Media works like before - no problems there. So is there any drivers or such things installed together with ImgBurn that may cause this? It can't be the wrong cable since it's S-ATA and to check if the cable is faulty i tried another one - but the problem remains ... Thanks in advance for any help!! greets PiLO Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted August 10, 2007 Share Posted August 10, 2007 Hmm that's an odd error for an SATA drive! It might well be driver related but only you can really test that - and I'm not sure you could if you're relying on the NVidia ones to get the RAID working. You'd have to try going back to the default MS ones, before then putting the latest NVidia ones back on again. You should also check your filter drivers via the 'Tools' menu. To help with the 'Media change notification' message I need to know what the exact error was. I can promise you that installing ImgBurn has not done anything to cause it to come up. ImgBurn is just an exe, if it's not running, NOTHING to do with ImgBurn is running and there's no way in the world it could break other programs. Link to comment Share on other sites More sharing options...
PiLO Posted August 10, 2007 Author Share Posted August 10, 2007 (edited) Thanks for your fast reply! I took a screenshot Filter Driver Load Order, since i don't know if it's ok or not .. Edited August 10, 2007 by PiLO Link to comment Share on other sites More sharing options...
blutach Posted August 10, 2007 Share Posted August 10, 2007 Yesterday i got my first DL media (Verbatim DVD+R DL 2,4 / MKM-001-00 / Made in India Sad to say, this might be an issue. I have read reports that the MII disks made by Moser Baer are inferior. Try getting ones Made in Singapore or even Taiwan. Regards Link to comment Share on other sites More sharing options...
dontasciime Posted August 10, 2007 Share Posted August 10, 2007 When you started ImgBurn did you still have 3.5.4.0 open ? and when you tried 3.5.4.0 again did you close ImgBurn ? Link to comment Share on other sites More sharing options...
PiLO Posted August 10, 2007 Author Share Posted August 10, 2007 When you started ImgBurn did you still have 3.5.4.0 open ? No. and when you tried 3.5.4.0 again did you close ImgBurn ? Yes. Sad to say, this might be an issue. I have read reports that the MII disks made by Moser Baer are inferior. Try getting ones Made in Singapore or even Taiwan. Cause this specific Error message came up (Logical Unit Communication CRC Error (ULTRA-DMA/32)) I thought it can't be a media problem, but i hope now it is I will soon try to get my hands on other media and try again. Thanks so far for your answers! btw: I googled this problem and read some posts, that some boards produce problems when connecting a s-ata burner. Can anybody confirm this? I couldn't find any information on how Asus' A8N Sli Deluxe and the SH-S183A work together .. i have the latest bios on the board, even installed a newer beta bios, but the error comes up again .. Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted August 10, 2007 Share Posted August 10, 2007 You don't need a screenshot of the filter drivers window, just click the 'clipboard' button and then 'paste' the text into your reply. Link to comment Share on other sites More sharing options...
PiLO Posted August 10, 2007 Author Share Posted August 10, 2007 (edited) Ok .. so here it is: ===============================================Filter Driver Load Order - ImgBurn v2.3.2.0 =============================================== Upper Device Filter: redbook Upper Class Filter: SiRemFil Device: CD/DVD-ROM Device Lower Class Filter: PxHelp20 Lower Device Filter: imapi Filter Name: redbook File Name: C:\WINDOWS\system32\DRIVERS\redbook.sys File Version: 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) File Description: Redbook-Audiofiltertreiber Product Name: Betriebssystem Microsoft® Windows® Product Version: 5.1.2600.2180 Company Name: Microsoft Corporation Copyright: © Microsoft Corporation. Alle Rechte vorbehalten. Filter Name: SiRemFil File Name: C:\WINDOWS\system32\DRIVERS\SiRemFil.sys File Version: 1, 1, 4, 0 [1.1.4.0] File Description: Filter driver for Silicon Image SATALink controllers. Product Name: Product Version: 1, 0, 0, 0 [1.0.0.0] Company Name: Silicon Image, Inc. Copyright: Copyright Edited August 10, 2007 by PiLO Link to comment Share on other sites More sharing options...
cornholio7 Posted August 10, 2007 Share Posted August 10, 2007 =============================================== Filter Driver Load Order - ImgBurn v2.3.2.7 =============================================== Upper Device Filter: [None Found] Upper Class Filter: SiRemFil Device: CD/DVD-ROM Device Lower Class Filter: [None Found] Lower Device Filter: [None Found] Filter Name: SiRemFil File Name: C:\Windows\system32\DRIVERS\SiRemFil.sys File Version: 1, 1, 7, 0 [1.1.7.0] File Description: Filter driver for Silicon Image SATALink controllers. Product Name: Product Version: 1, 0, 0, 0 [1.0.0.0] Company Name: Silicon Image, Inc. Copyright: Copyright © 2005-2007 Silicon Image, Inc. i have this and it doesn't cause any conflicts for me, i don't have any sata dvd drives Link to comment Share on other sites More sharing options...
PiLO Posted August 10, 2007 Author Share Posted August 10, 2007 I've changed some things and now it works!!! But i don't know which of the following changes helped me: I first updated my "Silicon Image SiI 3114 SoftRaid 5 Controller" and "Silicon Image's Pseudo Processor Device" with the latest drivers available on SI's site. Then i deleted the Upper Device Filter and Lower Device Filter Entries in the registry like explained in some threads of this forum: ===============================================Filter Driver Load Order - ImgBurn v2.3.2.0 =============================================== Upper Device Filter: redbook Upper Class Filter: [None Found] Device: CD/DVD-ROM Device Lower Class Filter: [None Found] Lower Device Filter: imapi Filter Name: redbook File Name: C:\WINDOWS\system32\DRIVERS\redbook.sys File Version: 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) File Description: Redbook-Audiofiltertreiber Product Name: Betriebssystem Microsoft® Windows® Product Version: 5.1.2600.2180 Company Name: Microsoft Corporation Copyright: © Microsoft Corporation. Alle Rechte vorbehalten. Filter Name: imapi File Name: C:\WINDOWS\system32\DRIVERS\imapi.sys File Version: 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) File Description: IMAPI Kernel Driver Product Name: Microsoft® Windows® Operating System Product Version: 5.1.2600.2180 Company Name: Microsoft Corporation Copyright: © Microsoft Corporation. All rights reserved. Then i tried to burn the same image again and it worked. Also the burn quality seems to be way better: - I checked the first (working) burn with kprobe and there were quite high PI and PIF errors (avg. PI above 300, max. PIF was 13 i think .. average 6) and also very much of them - the last burn is very good compared to the first one (avg. PI 21,38; max PIF 4 .. avg. PIF 0.14) I know the SH-S183A is not a serious quality verifying drive but i guess this huge difference in scanning results shows at least, that there is a quality difference. Thanks for all your help! Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted August 10, 2007 Share Posted August 10, 2007 I hope you didn't delete the two filters shown in your post?! Those two are fine and are supposed to be there. Link to comment Share on other sites More sharing options...
PiLO Posted August 10, 2007 Author Share Posted August 10, 2007 I hope you didn't delete the two filters shown in your post?! Those two are fine and are supposed to be there. Hehe .. no, the post above yours shows like it looks now. I deleted the "Upper Class Filter: SiRemFil" and the "Lower Class Filter: PxHelp20" .. hope this won't lead into other problems? But i made a backup, before i deleted them. Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted August 10, 2007 Share Posted August 10, 2007 The SiRemFil driver would be the cause of IOCTL_STORAGE_MCN_CONTROL not working (maybe the newer driver that corny has fixes the issue though?). It did that on my old machine too before I removed it. Anyway, I hope it's better for you now. Link to comment Share on other sites More sharing options...
Recommended Posts