JasonFriday13 Posted January 16, 2008 Share Posted January 16, 2008 I am looking at buying an LG writer in the next few months. Something a little more up to date and as a reserve drive in case my current one goes pop. I was looking at a H10N or similar (Black, to match my case). Any cheap suggestions (money wise)? Link to comment Share on other sites More sharing options...
mmalves Posted January 16, 2008 Share Posted January 16, 2008 Get the latest model available for the interface you want to use (e.g. GSA-H50N/H55N for IDE or GSA-H62N for SATA). By the way, you may want to read the LG DVD Writer FAQ Link to comment Share on other sites More sharing options...
LOCOENG Posted January 17, 2008 Share Posted January 17, 2008 I would go for a Lite-On or Pioneer, but Blu may try and convice you otherwise. Link to comment Share on other sites More sharing options...
JasonFriday13 Posted January 17, 2008 Author Share Posted January 17, 2008 Thanks mmalves, my drive turns out to be a BK OEM, when I purchased it all I got was the drive and the plastic bag that protects it. Get the latest model available for the interface you want to use (e.g. GSA-H50N/H55N for IDE or GSA-H62N for SATA). The icing on the cake is that I currently use IDE for my drives, but I also have four SATA connecters on my motherboard. So I can make use of those in the future. Oh, and blu doesn't have to convince me, LG writers all the way! Just having a look on the net while writing this reply and I think I am moving towards the GSA-H55N K (black faceplate) with the readspeed patch. Link to comment Share on other sites More sharing options...
dontasciime Posted January 17, 2008 Share Posted January 17, 2008 Ive got a few Lg drives, they are ok, but are a little slow for my liking. However there are a lot more burners out there worse than the LG brand. And LG have got a good drive with the Br-Hd-dvd rom combo. Link to comment Share on other sites More sharing options...
JasonFriday13 Posted January 18, 2008 Author Share Posted January 18, 2008 My next challenge is finding a store in Taranaki that sells them. The store I bought my current one from closed down about a year and a half ago . Link to comment Share on other sites More sharing options...
LOCOENG Posted January 18, 2008 Share Posted January 18, 2008 Can't you order one online? Link to comment Share on other sites More sharing options...
JasonFriday13 Posted January 18, 2008 Author Share Posted January 18, 2008 I don't have the ability to shop online yet. Link to comment Share on other sites More sharing options...
LOCOENG Posted January 18, 2008 Share Posted January 18, 2008 bummer Link to comment Share on other sites More sharing options...
dontasciime Posted January 18, 2008 Share Posted January 18, 2008 paypal and bank account Link to comment Share on other sites More sharing options...
JasonFriday13 Posted January 24, 2008 Author Share Posted January 24, 2008 I found an online store in New Zealand that sells the drive I am after. The site is PlayTech. They accept online bank deposits and branch deposits . Next question: for NZD $5, is it worth buying the LightScribe drive instead of the standard one? Mostly all I do after I write a disc is label it with a label describing the contents, eg Backup, *_movie (rarely used). Link to comment Share on other sites More sharing options...
LOCOENG Posted January 24, 2008 Share Posted January 24, 2008 I bought the BenQ 1655 for the LS feature as I'm a sucka for gimmicks....I've used it maybe 4-5 times. The printable discs are much better IMHO and that is what I use primarily. But some seem the like the LS discs. $5 isn't a big difference for the feature, so try it out....you don't have to use it and you aren't out a whole lot of dough. Link to comment Share on other sites More sharing options...
spinningwheel Posted January 24, 2008 Share Posted January 24, 2008 Next question: for NZD $5, is it worth buying the LightScribe drive instead of the standard one? Mostly all I do after I write a disc is label it with a label describing the contents, eg Backup, *_movie (rarely used). Jason; I run the BenQ 1655 lightscribe and it isn't worth the time or the 5 dollar difference. The discs are slightly more expensive, the drive is slightly more expensive and the time investment, while waiting for the disc to be labeled, is freekin' nuts. It does a nice job, but a little patience with a magic marker accomplishes the same objective...and you save the time and costs involved. spinner Link to comment Share on other sites More sharing options...
LOCOENG Posted January 24, 2008 Share Posted January 24, 2008 It does a nice job, but a little patience with a magic marker accomplishes the same objective I never have been able to draw pictures on a disc with a sharpie that looked worth a damn.... I also forgot to mention the time factor, it is rediculous. Link to comment Share on other sites More sharing options...
JasonFriday13 Posted January 24, 2008 Author Share Posted January 24, 2008 So can you still use a vivid to label those lightscribe discs (if choose not to lightscribe them)? If I start making stencils for my discs, then I would be better off getting the lightscribe drive. It would be better to have the option and not use it, than to not get it and need it later. The prices for both drives are below NZD $60, so I think I will buy the lightscribe drive, just in case I want to use it later. This will be the cheapest writer I have ever bought. My 4167b cost me $150 in January of 2006. Link to comment Share on other sites More sharing options...
JasonFriday13 Posted January 25, 2008 Author Share Posted January 25, 2008 Well, just ordered the lightscribe drive over the internet (LG GSA H55L), after it has been delivered, firmware update time. 1.05 was added to rpc1 just a few days ago. NZD $65.81 including gst and delivery. I can't wait! I got my sister to pay for it online, then I paid her. It should be here about Wednesday next week (5 days). Link to comment Share on other sites More sharing options...
spinningwheel Posted January 25, 2008 Share Posted January 25, 2008 LOCO; I never have been able to draw pictures on a disc with a sharpie that looked worth a damn ...neither have I, but just for labeling purposes all I use is the name of the data I put on the disc anyway, so no need for pix. I used to use a stomper and put labels on everything...then the manufacturers advised not to do that to a dvd so I had to clean them all off...what an experience that was.... Jason; I think I will buy the lightscribe drive Enjoy it, they are decent drives, let me know how you did after you burn and label your first one... Link to comment Share on other sites More sharing options...
blutach Posted January 26, 2008 Share Posted January 26, 2008 I'm a black sharpie man myself. It's a backup, after all and you can't see the pretty disk while it's in the cover/spindle or playing. Regards Link to comment Share on other sites More sharing options...
JasonFriday13 Posted January 26, 2008 Author Share Posted January 26, 2008 (edited) Just a side note, all my dvd+r cases are actually clear cd cases with no inserts, so a pretty picture on the disc is viewable 95% of the time . [edit] Another question: Any good lightscribe compatible programs out there? Nero is the easy way out but I prefer not to use it.[/edit] Edited January 26, 2008 by JasonFriday13 Link to comment Share on other sites More sharing options...
mmalves Posted January 26, 2008 Share Posted January 26, 2008 http://en.wikipedia.org/wiki/LightScribe http://www.cdrinfo.com/Sections/Reviews/Sp...ArticleId=13449 http://www.lightscribe.com/downloadSection...dex.aspx?id=810 Link to comment Share on other sites More sharing options...
spinningwheel Posted January 26, 2008 Share Posted January 26, 2008 I use the one that mmalves pointed to in his post, from Lightscribe itself. Make sure to get the accellerator if it's offered. Maybe they incorporated it into the original program by now, but for mine it was a plugin that you needed to install on its' own. Link to comment Share on other sites More sharing options...
JasonFriday13 Posted January 29, 2008 Author Share Posted January 29, 2008 Just got the confirmation email from PlayTech, paid in full and should arrive within 48 hours (deadline 5pm Thursday). Next up, media to buy. Link to comment Share on other sites More sharing options...
JasonFriday13 Posted January 30, 2008 Author Share Posted January 30, 2008 (edited) My new writer arrived this afternoon . Front of box: And my first LightScribed disc: The disc is actually darker than the photo shows. I scribed it three times just to see the contrast changes. I have already updated the firmware and increased the readspeed. Now its 1.05. Very happy with this drive. The DMA shows as UDMA 4. My harddrive shows as UDMA 2 (still, it's quick enough). [edit]I used Nero cover designer to create the labels (very easy to create and manipulate images).[/edit] Another disc I did with a template from lightscribe.com (scribed once using enhanced and best modes): Edited January 30, 2008 by JasonFriday13 Link to comment Share on other sites More sharing options...
dontasciime Posted January 30, 2008 Share Posted January 30, 2008 what kind of hard drive you got in thats showing udma2, Is it one of those older 78rpm ones Link to comment Share on other sites More sharing options...
blutach Posted January 30, 2008 Share Posted January 30, 2008 Is it one of those older 78rpm ones =)) Link to comment Share on other sites More sharing options...
Recommended Posts