Jump to content

Recommended Posts

Posted
I 22:45:26 ImgBurn Version 2.3.2.0 started!

I 22:45:26 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)

I 22:45:26 Total Physical Memory: 1,571,568 KB - Available: 282,632 KB

I 22:45:26 Initialising SPTI...

I 22:45:26 Searching for SCSI / ATAPI devices...

I 22:45:26 Found 1 DVD-ROM and 1 DVD±RW!

 

Well.... there's definatley something wrong.

 

Alright. Now, I've read forum upon forum of help and FAQ's about this error message. The dreaded dreaded error message.

 

Device Not Ready (Incompatable Medium Installed)

 

Apparently there's nothing we can do for my poor little non-burning computer, but I beg to differ considering it was burning fine last week. Well, not on ImgBurn, but on DVDFab Premium. When that program started to fail me I decided to turn to ImgBurn but uh... it's failing me too. I'll assume the same problem that caused the problem in DVDFab is the same one in ImgBurn.

Does anyone have anyone have any suggestions for me?

Apparently there's some freeware out there that's supposed to scan for something or something?

Any help would be greatly appreciated :) I've wracked my brain for the past 6 hours and it's not doing me too good.

 

Thanks in advance, much appreicated.

Posted
===============================================

Filter Driver Load Order - ImgBurn v2.3.2.0

===============================================

 

Upper Device Filter: redbook

Upper Class Filter: GEARAspiWDM

Upper Class Filter: saicdrwup

Device: CD/DVD-ROM Device

Lower Class Filter: saicdr

Lower Class Filter: cdrbsdrv

Lower Class Filter: PxHelp20

Lower Device Filter: [None Found]

 

Filter Name: redbook

File Name: C:\WINDOWS\System32\DRIVERS\redbook.sys

File Version: 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)

File Description: Redbook Audio Filter Driver

Product Name: Microsoft® Windows® Operating System

Product Version: 5.1.2600.2180

Company Name: Microsoft Corporation

Copyright: © Microsoft Corporation. All rights reserved.

 

Filter Name: GEARAspiWDM

File Name: C:\WINDOWS\System32\Drivers\GEARAspiWDM.sys

File Version: 2.0.4.3

File Description: CDRom Class Filter Driver

Product Name: GEAR.wrks

Product Version: 7.xx [2.0.4.3]

Company Name: GEAR Software Inc.

Copyright: Copyright © GEAR Software Inc. 2005

 

Filter Name: saicdrwup

File Name: C:\WINDOWS\system32\Drivers\saicdrwup.sys

File Version: 3.05.16 [3.5.16.0]

File Description: upper cdrom filter driver for Windows XP

Product Name:

Product Version:

Company Name: Software Architects, Inc.

Copyright: © Software Architects, Inc. 1998-2003. All rights reserved.

 

Filter Name: saicdr

File Name: C:\WINDOWS\system32\Drivers\saicdr.sys

File Version: 3.07.09 [3.7.9.0]

File Description: dvd/cdr driver for Windows 2000/XP

Product Name:

Product Version: 5.0.5 [5.0.5.0]

Company Name: Software Architects, Inc.

Copyright: © Software Architects, Inc. 1998-2003. All rights reserved.

 

Filter Name: cdrbsdrv

File Name: C:\WINDOWS\system32\Drivers\cdrbsdrv.sys

File Version: 7. 0. 0. 5 [7.5.0.0]

File Description: CD-ROM Filter Driver for Windows2000/xp

Product Name: B's Recorder GOLD7

Product Version: 7. 5. 0. 0 [7.5.0.0]

Company Name: B.H.A Corporation

Copyright: Copyright © 2000-2004 B.H.A Corporation

 

Filter Name: PxHelp20

File Name: C:\WINDOWS\System32\Drivers\PxHelp20.sys

File Version: 3.00.56a [3.0.56.0]

File Description: Px Engine Device Driver for Windows 2000/XP

Product Name: PxHelp20

Product Version: [2.0.0.0]

Company Name: Sonic Solutions

Copyright: Copyright © Sonic Solutions

Posted

All those old filter drivers might be getting in the way. Really, you only need Redbook and imapi (and the Device of course).

 

Backup your registry and try to remove all those except redbook and the drive. Reboot and try again. If still no good, restore your registry.

 

Regards

Posted

depending on the medium you use, it could be that its low quality and youve found the "really" low quality ones in the spindle .

basically, your drive is saying it does not recognise your discs, meaning it cant read them ( would probably be the same effect for all programs you tried)

 

What make and type of blank discs are you using ?

 

try putting a good burned disc from the past in and choose write mode, then copy and paste the info from the right hand side window into here

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.