Harry Baules Posted April 28, 2008 Share Posted April 28, 2008 I Link to comment Share on other sites More sharing options...
LOCOENG Posted April 28, 2008 Share Posted April 28, 2008 Posting a log will give us a little more information about your setup, what kind of discs you are trying to use and what firmware you are currently using on your drive. http://www.videohelp.com/dvdwriters/hp-dvd740e/1336 As you can see your drive should be able to handle DVD+R DL media up to 8X. Link to comment Share on other sites More sharing options...
Harry Baules Posted April 28, 2008 Author Share Posted April 28, 2008 Thanks for the light-speed response. I will try to burn again and post the inevitable error log. Link to comment Share on other sites More sharing options...
LOCOENG Posted April 28, 2008 Share Posted April 28, 2008 Existing logs can be found at help->imgburn logs Link to comment Share on other sites More sharing options...
Cynthia Posted April 28, 2008 Share Posted April 28, 2008 What brand/media code are you going to use? It's not the best DL writer for non Verbatim discs. Link to comment Share on other sites More sharing options...
Harry Baules Posted April 28, 2008 Author Share Posted April 28, 2008 Well I've read plenty on here since I joined last night and I figured out that I need to use Verbatim, made in Singapore, 2.4x DL ONLY!!!!!!!!!!!!! Link to comment Share on other sites More sharing options...
blutach Posted April 28, 2008 Share Posted April 28, 2008 At least the message is gettig through! Regards Link to comment Share on other sites More sharing options...
Recommended Posts