Omega69 Posted May 28, 2008 Posted May 28, 2008 (edited) Hi everyone and thankyou for reading my topic. My problem is that when I'm trying to record my images, sometimes IMGBurn stop recording (at any point of the recording) and it keeps at 0.0x and it doens't go on. I have recorded on DVD+R (verbatim CMC), DVD+RL (Verbatim MKM001) and the same problem on both. Sometimes the recording is OK but other times it freezes and the recording fails. To add, the program don't say any message of error and don't save the log file (because I have to kill the process). I had Vista x64 and I thought the problem was that, so I installed XP SP3 but I have the same problem. I thouht too that the problem could be the recorder, so I chenge my piooner 109 and I installed a pioneer 112D (with lastest firmware) but the problem is still there. I have made some test with other programs (DVDDecrypter and CloneCD) and no errors with them (but they get worst PI/PIF/POF results on tests). I have installed AnyDVD and Daemon tools lite but I close them before recordings (and I stop AnyDVD before closing it), so I have no idea where is my problem. If somebody knows the reason of the fail I would be very greatful. I have only tested last version of IMGBurn (2.4.1.0). I will test now other versions. Thankyou very much in advance!! Edited May 28, 2008 by Omega69
dontasciime Posted May 28, 2008 Posted May 28, 2008 Well if your installing clean ops then keep it to no anydvd and other stuff and see if problem remains. In other words Chipset drivers (minus any storage/ ide) then install gfx card driver and thats it to test with. If your using nforce chipset drivers do not use the storage driver part. Get latest drivers for jmicron if that's what your ide is or see if windows will pick it up with standard ms drivers first and use them instead. Do not bother testing previous versions of the program as your wasting your time doing that.
Omega69 Posted May 28, 2008 Author Posted May 28, 2008 Hi and thankyou for your answer. I have changed the Sata mode to AHCI mode (and I have installed XP and I have a clear installation right now). I will test my computer now and I'll comment results! Thank you for your help!!!
dontasciime Posted May 29, 2008 Posted May 29, 2008 You should have set sata mode in bios to emulate IDE not AHCI [AHCI] is harder to get optical to work with and is known to cause issues.
Omega69 Posted May 30, 2008 Author Posted May 30, 2008 Thank you, I will test it. Anyway it seems that I don't have problems with IMGBurn. Thanks!
Recommended Posts