Jump to content

no device detected


VANMILKSHAKE

Recommended Posts

hi please help

 

I'm receiving an "error message no device detected" ?

 

I' rebooted OS sys after I' installed IMGBURN

 

UPDATED: ADAPTEC ASPI VER 4.7 for WINME

 

before updating of ASPI BARTS' utility "ASPI_YOU.EXE" would ID my ADAPTERS' after updating zilch didn't find any adapters?

 

device manager list device as:

PIONEER DVD-RW DVR-109

options checked in settings:

disconnect=true

DMA=true

current drive letter=D:

 

explorer can read DVD files *.vob,*.bup,*.ifo

doesn't read AUDIO files ?

 

DVD-RW is on SECONDARY IDE CONTROLLER as master using 80 pin cable

 

-------imgburn log-----------------------

I 21:48:51 ImgBurn Version 2.4.1.0 started!

I 21:48:51 Microsoft Windows Millennium Edition

I 21:48:51 Total Physical Memory: 195,852 KB - Available: 87,708 KB

W 21:48:51 Drive C:\ (FAT32) does not support single files > 4 GB in size.

I 21:48:51 Initialising ASPI...

I 21:48:51 WNASPI32.DLL - Adaptec's ASPI Layer - ASPI for Win32 (95/NT) DLL - Version 4.6.0.1021

I 21:48:51 Searching for SCSI / ATAPI devices...

W 21:48:51 No devices detected!

-------------------end log-------------------------------------

 

----------ASPICHK LOG ------------------

I' used the old version APSICHK for "WIN95" VER 1 because the save function was missing in the newer version.

*****************************************************************

LOG0144: Starting ASPICHK installer on Tue Jun 03 22:23:42 2008

ASPICHK0438: OS = Windows 95 wrong ??(4.90.3000) right !

UPGRADE1004: c:\windows\system\wnaspi32.dll dated 12/11/2001 00:32:56, 45056 bytes.

UPGRADE1062: c:\windows\system\wnaspi32.dll version 4.6.0.1021

UPGRADE1004: c:\windows\system\winaspi.dll dated 06/09/2000 00:00:00, 3536 bytes.

UPGRADE1062: c:\windows\system\winaspi.dll version 1.0.0.65

UPGRADE1004: c:\windows\system\iosubsys\apix.vxd dated 12/11/2001 00:28:58, 22603 bytes.

UPGRADE1062: c:\windows\system\iosubsys\apix.vxd version 4.6.0.1021

UPGRADE0965: File c:\windows\system\aspienum.vxd does not exist

UPGRADE0369: No existing file to compare, upgrade recommended

ASPICHK0522: Inconsistent version numbers among components

ASPICHK0592: ASPI installation has problems

LOG0218: Closing installer log on Tue Jun 03 22:23:42 2008

LOG0219: *****************************************************************

-------------end log------------------------------------------------------------------------------------------

 

 

I' tried to replace this file c:\windows\system\aspienum.vxd using msconfig restore file but WINME says this file does not exist ?

 

DVD BURNER:PIONEER DVD-RW-DRR-109

ImgBurn Version 2.4.1.0

Edited by VANMILKSHAKE
Link to comment
Share on other sites

I just dropped the latest wnaspi32 that I could find on nero ftp into Imgburn folder but I do have apix.vxd installed

 

I 11:12:16 ImgBurn Version 2.4.1.8 Beta started!
I 11:12:16 Microsoft Windows Millennium Edition
I 11:12:16 Total Physical Memory: 523,704 KB  -  Available: 266,236 KB
W 11:12:16 Drive C:\ (FAT32) does not support single files > 4 GB in size.
W 11:12:16 Drive D:\ (FAT32) does not support single files > 4 GB in size.
W 11:12:16 Drive E:\ (FAT32) does not support single files > 4 GB in size.
I 11:12:16 Initialising ASPI...
I 11:12:16 WNASPI32.DLL - Nero WnAspi32 - Win32 Nero Aspi Library - Version 2.0.1.74
I 11:12:16 Searching for SCSI / ATAPI devices...
I 11:12:17 Found 1 CD-RW, 1 DVD-ROM and 1 DVD-RW!

 

 

 

 

 

 

post-26-1212572253_thumb.png

 

extract the rar and place apix.vxd in

 

c:\WINDOWS\SYSTEM\IOSUBSYS\APIX.VXD

 

apix.rar

 

you should be then able to drop the wnaspi32 into ImgBurn folder and have it work.

 

 

NeroApix.rar

 

 

you may also be able to just drop NeroApix.vxd and wnaspi32 into ImgBurn folder

 

 

Or import the reg file in the FAQ as advised above

Link to comment
Share on other sites

thank you IMGBURN sees my burner now :rolleyes:

 

reinstalled the old version of ADAPTEC ASPI VER 4.6

 

I' checked to make sure all files were present

 

Windows ME:

 

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.