gaspdaddy Posted September 20, 2008 Share Posted September 20, 2008 This is my log from a recent attempt to burn DVD-R.... Solutions anyone? Thanks ; //****************************************\\ ; ImgBurn Version 2.4.1.0 - Log ; Saturday, 20 September 2008, 08:55:27 ; \\****************************************// ; ; I 07:25:31 ImgBurn Version 2.4.1.0 started! I 07:25:31 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3) I 07:25:31 Total Physical Memory: 1,506,032 KB - Available: 1,129,816 KB I 07:25:31 Initialising SPTI... I 07:25:31 Searching for SCSI / ATAPI devices... I 07:25:31 Found 1 DVD-ROM and 1 DVD Link to comment Share on other sites More sharing options...
mmalves Posted September 20, 2008 Share Posted September 20, 2008 I 07:25:31 ImgBurn Version 2.4.1.0 started! Upgrade to the latest ImgBurn I 07:32:51 Destination Device: [2:1:0] LITE-ON DVDRW SOHW-1693S KS09 (E:) (ATA)I 07:32:51 Destination Media Type: DVD-R (Disc ID: RITEKF1) (Speeds: 6x, 8x, 12x, 16x) I 07:32:51 Write Speed: MAX There's firmware KS0B available for your burner. Remove any disc from the drive and close the tray before updating the firmware. Reboot the computer after the update has finished. Also, the media you're using is crap. Try burning at 8x or 12x and it might work, but you'll have much better quality burns if you use Verbatim and Taiyo Yuden blanks. Link to comment Share on other sites More sharing options...
Recommended Posts