eddu Posted October 20, 2008 Share Posted October 20, 2008 Hello everyone! I just installed imgburn and i also updated the firmware for my Disc burner. Its a LG HL-DT-ST DVDRAM GSA-4163B A106 (ATA). This is the log: I 07:01:00 ImgBurn Version 2.4.2.0 started! I 07:01:00 Microsoft Windows Vista Ultimate Edition (6.0, Build 6000) I 07:01:00 Total Physical Memory: 2.096.064 KB - Available: 1.362.044 KB I 07:01:00 Initialising SPTI... I 07:01:00 Searching for SCSI / ATAPI devices... I 07:01:00 Found 1 DVD-ROM and 1 DVD Link to comment Share on other sites More sharing options...
techman Posted October 20, 2008 Share Posted October 20, 2008 what does the filter driver load order show you can use the copy to clipboard and paste here Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted October 20, 2008 Share Posted October 20, 2008 The 'Medium Not Present' message is what your drive is telling ImgBurn. ImgBurn can see your drive just fine, it's your drive that can't see the media in it - you have put a disc in it yeah?! If there really is a disc in it, you might just have a disc that the drive doesn't support. It's an old drive so try finding some quality 'older' (slower speed rating) media. Link to comment Share on other sites More sharing options...
eddu Posted October 20, 2008 Author Share Posted October 20, 2008 I inserted a DVD-RW and on Current profile it says: DVD-RW and it says on the bottom Ready. This is what the filter shows: =============================================== Filter Driver Load Order - ImgBurn v2.4.2.0 =============================================== Upper Device Filter: [None Found] Upper Class Filter: [None Found] Device: CD/DVD-ROM Device Lower Class Filter: [None Found] Lower Device Filter: [None Found] In Version Information everything shows Unknown. Now, my question is: To change the book type for DVD+R DL do I have to insert a disc DVD+R DL? or should I be able to change the book type with out inserting a disc? If so, then i Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted October 20, 2008 Share Posted October 20, 2008 I hope you ordered Verbatim 2.4x DVD+R DL discs! If your drive supports the booktype commands, ImgBurn will automatically booktype DVD+R DL media to DVD-ROM. Link to comment Share on other sites More sharing options...
eddu Posted October 20, 2008 Author Share Posted October 20, 2008 Yeah I oredered Verbatim 2.4x DVD+R DL discs, i dont want to risk a bit. Questions: To burn 360 games, do I have to manually change the book type to DVD R+ DL Media to be able to burn the game? or does Imgburn automatically recognizes the DL disc and sets it up? Im sorry for this questions but i just started using Imgburn and im really a newbie on burning disc. Thanks alot Lighting UK!. Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted October 20, 2008 Share Posted October 20, 2008 Re-read my previous post. Link to comment Share on other sites More sharing options...
Recommended Posts