MBHockey Posted November 7, 2008 Posted November 7, 2008 I posted this over on cdfreaks before I realized ImgBurn had their own forum. But here goes: I am trying to burn a copy of Transformers with ImgBurn. I ripped it with DVD Fab and then burned it with ImgBurn to a Verbatim DVD+R DL. I followed the FAQ on these boards on how to create movie DVDs from VIDEO_TS folders. The burn went fine, it verified, and it played beautifully in a crappy $20 DVD standalone player but it refuses to play on my xbox 360 (it tells me it's an "unplayable disc" after a couple of minutes of trying to read it). My hardware is an external Samsung se-204s (flashed with TS02 firmware patched by Patch Utility). I believe the patch makes it so my burner (regardless of the program using it) sets the book-type to dvd-rom. I'm trying to figure out why I cannot burn DVD movies with ImgBurn that will play in my xbox 360. Any help would be greatly appreciated . Thanks! Here is the log: E 20:19:25 Failed to check for ImgBurn update! I 20:19:25 Found 1 DVD�RW/RAM! I 20:24:14 Operation Started! I 20:24:14 Building Image Tree... I 20:24:27 Checking Directory Depth... I 20:24:27 Calculating Totals... I 20:24:27 Preparing Image... I 20:24:49 Using Layer Break LBA: 1945195 -> 1978336 (VTS_05, PGC: 1, Chapter: 12, Cell: 19, Vob/Cell ID: 2/1, Time: 01:07:19, SPLIP: Yes -> No) I 20:24:49 Checking Path Length... I 20:24:49 Contents: 27 Files, 2 Folders I 20:24:49 Size: 8,034,740,224 bytes I 20:24:49 Sectors: 3,923,213 I 20:24:49 Image Size: 8,103,264,256 bytes I 20:24:49 Image Sectors: 3,956,672 I 20:24:52 Operation Successfully Completed! - Duration: 00:00:38 I 20:24:52 Operation Started! I 20:24:52 Source File: -==/\/[bUILD IMAGE]\/\==- I 20:24:52 Source File Sectors: 3,956,672 (MODE1/2048) I 20:24:52 Source File Size: 8,103,264,256 bytes I 20:24:52 Source File Volume Identifier: TRANSFORMER_VANILLA I 20:24:52 Source File Application Identifier: IMGBURN V2.4.2.0 - THE ULTIMATE IMAGE BURNER! I 20:24:52 Source File Implementation Identifier: ImgBurn I 20:24:52 Source File File System(s): ISO9660, UDF (1.02) I 20:24:52 Destination Device: [0:1:0] TSSTcorp CDDVDW SE-S204S TS02 (D:) (ATA) I 20:24:52 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x) I 20:24:52 Destination Media Sectors: 4,173,824 I 20:24:52 Write Mode: DVD I 20:24:52 Write Type: DAO I 20:24:52 Write Speed: 2.4x I 20:24:52 Link Size: Auto I 20:24:52 Test Mode: No I 20:24:52 OPC: No I 20:24:52 BURN-Proof: Enabled I 20:24:52 Book Type Setting: N/A I 20:24:52 Optimal L0 Data Zone Capacity: 1,978,336 I 20:24:52 Optimal L0 Data Zone Method: IFO Cell Boundary I 20:25:32 Filling Buffer... (20 MB) I 20:25:33 Writing LeadIn... I 20:25:35 Writing Session 1 of 1... (1 Track, LBA: 0 - 3956671) I 20:25:35 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3956671) I 20:25:35 Writing Layer 0... (LBA: 0 - 1978335) I 20:46:00 Writing Layer 1... (LBA: 1978336 - 3956671) I 21:06:23 Synchronising Cache... I 21:06:26 Closing Track... I 21:06:27 Finalising Disc... I 21:07:21 Exporting Graph Data... I 21:07:21 Graph Data File: C:\Documents and Settings\Mike\Application Data\ImgBurn\Graph Data Files\TSSTcorp_CDDVDW_SE-S204S_TS02_WEDNESDAY-NOVEMBER-05-2008_8-24_PM_MKM-001-00_2.4x.ibg I 21:07:21 Export Successfully Completed! I 21:07:21 Operation Successfully Completed! - Duration: 00:42:28 I 21:07:21 Average Write Rate: 3,233 KB/s (2.3x) - Maximum Write Rate: 3,702 KB/s (2.7x) I 21:07:21 Cycling Tray before Verify... W 21:07:28 Waiting for device to become ready... I 21:07:48 Device Ready! I 21:07:49 Operation Started! I 21:07:49 Source Device: [0:1:0] TSSTcorp CDDVDW SE-S204S TS02 (D:) (ATA) I 21:07:49 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x) I 21:07:49 Image File: -==/\/[bUILD IMAGE]\/\==- I 21:07:49 Image File Sectors: 3,956,672 (MODE1/2048) I 21:07:49 Image File Size: 8,103,264,256 bytes I 21:07:49 Image File Volume Identifier: TRANSFORMER_VANILLA I 21:07:49 Image File Application Identifier: IMGBURN V2.4.2.0 - THE ULTIMATE IMAGE BURNER! I 21:07:49 Image File Implementation Identifier: ImgBurn I 21:07:49 Image File File System(s): ISO9660, UDF (1.02) I 21:07:49 Read Speed (Data/Audio): MAX / MAX I 21:07:49 Verifying Session 1 of 1... (1 Track, LBA: 0 - 3956671) I 21:07:49 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 3956671) I 21:07:49 Verifying Layer 0... (LBA: 0 - 1978335) I 21:13:38 Verifying Layer 1... (LBA: 1978336 - 3956671) I 21:19:19 Exporting Graph Data... I 21:19:19 Graph Data File: C:\Documents and Settings\Mike\Application Data\ImgBurn\Graph Data Files\TSSTcorp_CDDVDW_SE-S204S_TS02_WEDNESDAY-NOVEMBER-05-2008_8-24_PM_MKM-001-00_2.4x.ibg I 21:19:19 Export Successfully Completed! I 21:19:19 Operation Successfully Completed! - Duration: 00:11:29 I 21:19:19 Average Verify Rate: 11,485 KB/s (8.3x) - Maximum Verify Rate: 16,731 KB/s (12.1x)
mmalves Posted November 7, 2008 Posted November 7, 2008 I 21:07:49 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x) The log tells us it's a successful burn, correctly booktyped too, so there's no reason it shouldn't play. Maybe your Xbox 360's drive doesn't like DVD+R DL media, or has worn out to the point that it can't properly read it. Does it play single-layer recordable discs properly? Try this disc on other Xbox 360s if you can.
MBHockey Posted November 7, 2008 Author Posted November 7, 2008 I 21:07:49 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x) The log tells us it's a successful burn, correctly booktyped too, so there's no reason it shouldn't play. Maybe your Xbox 360's drive doesn't like DVD+R DL media, or has worn out to the point that it can't properly read it. Does it play single-layer recordable discs properly? Try this disc on other Xbox 360s if you can. Thanks for the insight. It does play DVD+R DL media burned with the same burner with a different program (Toast) which is why I'm trying to figure out the issue with ImgBurn. Actually, I can't remember if I have tried that after flashing the drive. I will burn the same exact data with the same burner with Toast on the same media and see if that plays (since I have no other xbox 360s to test with). If it plays fine I guess there's a problem with ImgBurn and if it also doesn't play it's probably the burner, right?
mmalves Posted November 7, 2008 Posted November 7, 2008 When you burn with Toast do you also set the write speed to 2.4x like you do in ImgBurn? If I'm not mistaken it defaults to use the max speed, which in your case is 4x. Also, I'm not sure about your SE-S204S burner, but my SH-S203B (internal 20x SATA) does better quality burns at 4x on those Verbatim blanks.
MBHockey Posted November 7, 2008 Author Posted November 7, 2008 When you burn with Toast do you also set the write speed to 2.4x like you do in ImgBurn? If I'm not mistaken it defaults to use the max speed, which in your case is 4x. Also, I'm not sure about your SE-S204S burner, but my SH-S203B (internal 20x SATA) does better quality burns at 4x on those Verbatim blanks. I would set Toast to burn at 2.4x because I thought slower speeds were always more reliable (it does give you the option).
dontasciime Posted November 7, 2008 Posted November 7, 2008 When you burn with Toast do you also set the write speed to 2.4x like you do in ImgBurn? If I'm not mistaken it defaults to use the max speed, which in your case is 4x. Also, I'm not sure about your SE-S204S burner, but my SH-S203B (internal 20x SATA) does better quality burns at 4x on those Verbatim blanks. I would set Toast to burn at 2.4x because I thought slower speeds were always more reliable (it does give you the option). Not always true the Samsung 203b prefers to burn Verbatim MKM-001-00 @4x rather than the default 2.4x which is what Mmalves touched upon actually said in his couple of posts above. To OP try single layer as Mmalves suggested but use DVD-R for you movie to try on your 360 make sure it is DVD-R if you burn it in your Samsung especially.
MBHockey Posted November 7, 2008 Author Posted November 7, 2008 So I burned the same VIDEO_TS folder in Toast and verification failed at exactly 50% through (do you think this is where it put the layer break?) This disc also does not play in the xbox 360 but it does play in the aforementioned standalone DVD player. I'll try burning at 4x with ImgBurn and see if that works. I just hate wasting all these DL discs...but I guess once you find the optimal formula you can just stick with it right? Thanks for all your help everyone.
MBHockey Posted November 8, 2008 Author Posted November 8, 2008 Hey all, I took your advice and burned on 4x with this media and it worked (mostly). The important part is the resulting DVD played beautifully in the xbox 360, but I did have a couple of errors and I'm not sure what they mean (I've bolded them in the log below). Can anyone tell me what they mean? I'm more worried about that first one! When I first started the burn, I immediately got an error and then when it went to finalize the disc. Here's the log: I 20:03:02 ImgBurn Version 2.4.2.0 started!I 20:03:02 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3)I 20:03:02 Total Physical Memory: 1,048,116 KB - Available: 800,952 KBI 20:03:02 Initialising SPTI...I 20:03:02 Searching for SCSI / ATAPI devices...E 20:03:02 Failed to check for ImgBurn update!I 20:03:04 Found 1 DVD
Recommended Posts