geno888 Posted November 21, 2008 Share Posted November 21, 2008 Hi LUK There is another thing I'd like to be implemented in new versions of ImgBurn After burning a disc in BUILD mode, it is possible to verify the just burned disc, but the verify starts immediately after the burn is completed. Is it possible that the user can define in options a certain amount of time before the verify start to let the drive (and the disc) to cool a bit? After burning a disc, of course, the drive becomes warmer and in summer this can be a rather annoying issue. But this can be a rather annoying issue even in winter, when burning many discs consecutively. Right now it is possible that the user wait some time before the verify, but only if the disc was burned from an image file (an ISO for example), but in BUILD mode the verify starts immediately after the end of cycling tray. TIA Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted November 21, 2008 Share Posted November 21, 2008 Use additional drives when burning lots of discs and then the ones not in use will have time to cool down. Link to comment Share on other sites More sharing options...
Recommended Posts