I/O Error!

[ReeceS]

Hey everyone, I'm having a bit of trouble burning the Windows 7 image to 1-16x DvD's

 

The error I got included the following.

 

 

I 18:44:40 Operation Started!

I 18:44:40 Source Device: [3:1:0] LITE-ON DVDRW LH-20A1L BL05 (F:) (ATA)

I 18:44:40 Source Media Type: DVD+R (Book Type: DVD-ROM) (Disc ID: CMC MAG-M01-00) (Speeds: 2.4x, 4x, 6x, 8x, 12x, 16x)

I 18:44:40 Image File: X:\7000.0.081212-1400_client_en-us_Ultimate-GB1CULXFRE_EN_DVD.iso

I 18:44:40 Image File Sectors: 1,653,813 (MODE1/2048)

I 18:44:40 Image File Size: 3,387,009,024 bytes

I 18:44:40 Image File Volume Identifier: GB1CULXFRE_EN_DVD

I 18:44:40 Image File Volume Set Identifier: 59727580MS UDFBridge

I 18:44:40 Image File Application Identifier: CDIMAGE 2.54 (01/01/2005 TM)

I 18:44:40 Image File Implementation Identifier: Microsoft CDIMAGE UDF

I 18:44:40 Image File File System(s): ISO9660 (Bootable), UDF (1.02)

I 18:44:40 Read Speed (Data/Audio): MAX / MAX

I 18:44:40 Verifying Session 1 of 1... (1 Track, LBA: 0 - 1653812)

I 18:44:40 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 1653812)

E 19:00:11 Failed to Read Sector 693785 - Reason: L-EC Uncorrectable Error

E 19:00:11 Sector 693785 maps to File: \sources\install.wim

E 19:00:11 Failed to Verify Sectors!

I 19:00:11 Exporting Graph Data...

I 19:00:11 Graph Data File: C:\Documents and Settings\Reece\Application Data\ImgBurn\Graph Data Files\LITE-ON_DVDRW_LH-20A1L_BL05_SATURDAY-JANUARY-10-2009_18-33_CMC_MAG-M01-00_4x.ibg

I 19:00:11 Export Successfully Completed!

E 19:00:11 Operation Failed! - Duration: 00:15:30

I 19:00:11 Average Verify Rate: 1,492 KB/s (1.1x) - Maximum Verify Rate: 14,624 KB/s (10.6x)

[mmalves]

I 18:44:40 Source Device: [3:1:0] LITE-ON DVDRW LH-20A1L BL05 (F:) (ATA)

I 18:44:40 Source Media Type: DVD+R (Book Type: DVD-ROM) (Disc ID: CMC MAG-M01-00) (Speeds: 2.4x, 4x, 6x, 8x, 12x, 16x)

I 19:00:11 Graph Data File: C:\Documents and Settings\Reece\Application Data\ImgBurn\Graph Data Files\LITE-ON_DVDRW_LH-20A1L_BL05_SATURDAY-JANUARY-10-2009_18-33_CMC_MAG-M01-00_4x.ibg

There's firmware BL06 available for your burner. Remove any disc and close the tray before flashing. Reboot after it has finished.

 

You may want to try burning at 8x or 12x to see if you get a better burn, but the real problem is the junk blanks you're using. Try with Verbatim or Taiyo Yuden blanks, or at least anything that doesn't use CMC MAG dye, and it should work