remus Posted February 1, 2010 Share Posted February 1, 2010 Hi there, can u help me, im getting frustrated with this image file as i try to burn it on verbatim dvd+r dl media my dvd drive is HL-DT-ST DVDRAM GSA-T50N with firmware RC04, my media is verbatim dvd+r dl MKM-003 i had a dvd9 video ISO id like to burn, the iso is not copyright protected (this is i'm sure). and i failed to burn it. i managed to search this forum and find topic : http://forum.imgburn.com/index.php?showtopic=11161 and find that the problem has solved by all means upgrading firmware...but id like u to take a look at my case, and i really appreciate ur opinion. this is my 1st log : ; //****************************************\\ ; ImgBurn Version 2.5.0.0 - Log ; Selasa, 19 Januari 2010, 21:57:07 ; \\****************************************// ; ; I 21:45:02 ImgBurn Version 2.5.0.0 started! I 21:45:02 Microsoft Windows Vista Ultimate Edition (6.0, Build 6001 : Service Pack 1) I 21:45:02 Total Physical Memory: 3.107.036 KB - Available: 2.110.848 KB W 21:45:02 Drive F:\ (FAT32) does not support single files > 4 GB in size. W 21:45:02 SPTD can have a detrimental effect on drive performance. I 21:45:03 Initialising SPTI... I 21:45:03 Searching for SCSI / ATAPI devices... I 21:45:03 Found 1 DVD-ROM and 1 DVD±RW/RAM! I 21:49:23 Operation Started! I 21:49:23 Source File: E:\Movies\T2\Transformers2.mds I 21:49:23 Source File Sectors: 4.173.632 (MODE1/2048) I 21:49:23 Source File Size: 8.547.598.336 bytes I 21:49:23 Source File Volume Identifier: T2 I 21:49:23 Source File Volume Set Identifier: 4ABF83A100000000 I 21:49:23 Source File Application Identifier: MKISOFS ISO 9660/HFS FILESYSTEM BUILDER & CDRECORD CD-R/DVD CREATOR © 1993 E.YOUNGDALE © 1997 J.PEARSON/J.SCHILLING I 21:49:23 Source File Implementation Identifier: mkisofs I 21:49:23 Source File File System(s): ISO9660; UDF (1.02) I 21:49:23 Destination Device: [2:0:0] HL-DT-ST DVDRAM GSA-T50N RC04 (G:) (ATA) I 21:49:23 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2,4x; 4x; 6x) I 21:49:23 Destination Media Sectors: 4.173.824 I 21:49:23 Write Mode: DVD I 21:49:23 Write Type: DAO I 21:49:23 Write Speed: 2,4x I 21:49:23 Link Size: Auto I 21:49:23 Lock Volume: Yes I 21:49:23 Test Mode: No I 21:49:23 OPC: No I 21:49:23 BURN-Proof: Enabled I 21:49:23 Book Type Setting: N/A I 21:49:23 Optimal L0 Data Zone Capacity: 2.086.816 I 21:49:23 Optimal L0 Data Zone Method: Copied From Original Disc E 21:50:07 Set L0 Data Zone Capacity Failed! - Reason: Write Error --> failed here E 21:50:07 Operation Failed! - Duration: 00:00:44 I 21:50:07 Average Write Rate: N/A - Maximum Write Rate: N/A I 21:50:31 Operation Started! I 21:50:31 Source File: E:\Movies\T2\Transformers2.mds I 21:50:31 Source File Sectors: 4.173.632 (MODE1/2048) I 21:50:31 Source File Size: 8.547.598.336 bytes I 21:50:31 Source File Volume Identifier: T2 I 21:50:31 Source File Volume Set Identifier: 4ABF83A100000000 I 21:50:31 Source File Application Identifier: MKISOFS ISO 9660/HFS FILESYSTEM BUILDER & CDRECORD CD-R/DVD CREATOR © 1993 E.YOUNGDALE © 1997 J.PEARSON/J.SCHILLING I 21:50:31 Source File Implementation Identifier: mkisofs I 21:50:31 Source File File System(s): ISO9660; UDF (1.02) I 21:50:31 Destination Device: [2:0:0] HL-DT-ST DVDRAM GSA-T50N RC04 (G:) (ATA) I 21:50:31 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2,4x; 4x; 6x) I 21:50:31 Destination Media Sectors: 4.173.632 I 21:50:31 Write Mode: DVD I 21:50:31 Write Type: DAO I 21:50:31 Write Speed: 2,4x I 21:50:31 Link Size: Auto I 21:50:31 Lock Volume: Yes I 21:50:31 Test Mode: No I 21:50:31 OPC: No I 21:50:31 BURN-Proof: Enabled I 21:50:31 Book Type Setting: N/A I 21:50:31 Optimal L0 Data Zone Capacity: 2.086.816 I 21:50:31 Optimal L0 Data Zone Method: Copied From Original Disc I 21:50:31 Set L0 Data Zone Capacity Succeeded! --> then succeed here...? how can that be? I 21:50:31 Filling Buffer... (40 MB) I 21:50:32 Writing LeadIn... W 21:50:55 Failed to Write Sectors 544 - 575 - Reason: Write Error --> getting worse W 21:50:55 Retrying (1 of 20)... W 21:50:55 Retry Failed - Reason: Write Error W 21:50:55 Retrying (2 of 20)... W 21:50:55 Retry Failed - Reason: Invalid Address For Write W 21:50:55 Retrying (3 of 20)... W 21:50:55 Retry Failed - Reason: Invalid Address For Write W 21:50:55 Retrying (4 of 20)... W 21:50:55 Retry Failed - Reason: Invalid Address For Write W 21:50:55 Retrying (5 of 20)... W 21:50:55 Retry Failed - Reason: Invalid Address For Write W 21:50:55 Retrying (6 of 20)... W 21:50:55 Retry Failed - Reason: Invalid Address For Write W 21:50:55 Retrying (7 of 20)... W 21:50:55 Retry Failed - Reason: Invalid Address For Write W 21:50:55 Retrying (8 of 20)... W 21:50:55 Retry Failed - Reason: Invalid Address For Write W 21:50:55 Retrying (9 of 20)... W 21:50:55 Retry Failed - Reason: Invalid Address For Write W 21:50:55 Retrying (10 of 20)... W 21:50:55 Retry Failed - Reason: Invalid Address For Write W 21:50:55 Retrying (11 of 20)... W 21:50:55 Retry Failed - Reason: Invalid Address For Write W 21:50:55 Retrying (12 of 20)... W 21:50:55 Retry Failed - Reason: Invalid Address For Write W 21:50:55 Retrying (13 of 20)... W 21:50:55 Retry Failed - Reason: Invalid Address For Write W 21:50:55 Retrying (14 of 20)... W 21:50:55 Retry Failed - Reason: Invalid Address For Write W 21:50:55 Retrying (15 of 20)... W 21:50:55 Retry Failed - Reason: Invalid Address For Write W 21:50:55 Retrying (16 of 20)... W 21:50:55 Retry Failed - Reason: Invalid Address For Write W 21:50:55 Retrying (17 of 20)... W 21:50:55 Retry Failed - Reason: Invalid Address For Write W 21:50:55 Retrying (18 of 20)... W 21:50:55 Retry Failed - Reason: Invalid Address For Write W 21:50:55 Retrying (19 of 20)... W 21:50:55 Retry Failed - Reason: Invalid Address For Write W 21:50:55 Retrying (20 of 20)... W 21:50:55 Retry Failed - Reason: Invalid Address For Write E 21:51:07 Failed to Write Sectors 544 - 575 - Reason: Write Error E 21:51:07 Next Writable Address: 0 I 21:51:07 Synchronising Cache... W 21:51:08 Potential 'WaitImmediateIO' Deferred Error - (0/3) - Write Error W 21:51:08 Synchronise Cache Failed! - Reason: Write Error W 21:51:08 Retrying (1 of 3)... W 21:51:09 Potential 'WaitImmediateIO' Deferred Error - (0/3) - Write Error W 21:51:09 Retry Failed - Reason: Write Error W 21:51:09 Retrying (2 of 3)... W 21:51:10 Potential 'WaitImmediateIO' Deferred Error - (0/3) - Write Error W 21:51:10 Retry Failed - Reason: Write Error W 21:51:10 Retrying (3 of 3)... W 21:51:11 Potential 'WaitImmediateIO' Deferred Error - (0/3) - Write Error W 21:51:11 Retry Failed - Reason: Write Error E 21:51:13 Synchronise Cache Failed! - Reason: Write Error I 21:51:13 Synchronising Cache (Last Attempt!)... E 21:51:13 Synchronise Cache Failed! - Reason: Unknown (ASC: 0xA0, ASCQ: 0x80) W 21:51:20 User opted to skip the 'Close Track/Session/Disc' functions. E 21:51:20 Failed to Write Image! E 21:51:20 Operation Failed! - Duration: 00:00:49 I 21:51:20 Average Write Rate: 0 KB/s (0.0x) - Maximum Write Rate: 0 KB/s (0.0x) I 21:55:04 Operation Started! I 21:55:04 Source File: E:\Movies\T2\Transformers2.mds I 21:55:04 Source File Sectors: 4.173.632 (MODE1/2048) I 21:55:04 Source File Size: 8.547.598.336 bytes I 21:55:04 Source File Volume Identifier: T2 I 21:55:04 Source File Volume Set Identifier: 4ABF83A100000000 I 21:55:04 Source File Application Identifier: MKISOFS ISO 9660/HFS FILESYSTEM BUILDER & CDRECORD CD-R/DVD CREATOR © 1993 E.YOUNGDALE © 1997 J.PEARSON/J.SCHILLING I 21:55:04 Source File Implementation Identifier: mkisofs I 21:55:04 Source File File System(s): ISO9660; UDF (1.02) I 21:55:04 Destination Device: [2:0:0] HL-DT-ST DVDRAM GSA-T50N RC04 (G:) (ATA) I 21:55:04 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2,4x; 4x; 6x) I 21:55:04 Destination Media Sectors: 4.173.824 I 21:55:04 Write Mode: DVD I 21:55:04 Write Type: DAO I 21:55:04 Write Speed: 2,4x I 21:55:04 Link Size: Auto I 21:55:04 Lock Volume: Yes I 21:55:04 Test Mode: No I 21:55:04 OPC: No I 21:55:04 BURN-Proof: Enabled I 21:55:05 Book Type Setting: N/A I 21:55:05 Optimal L0 Data Zone Capacity: 2.086.816 I 21:55:05 Optimal L0 Data Zone Method: Copied From Original Disc I 21:56:30 Abort Request Acknowledged I 21:56:40 Set L0 Data Zone Capacity Succeeded! --> try again here, succeed E 21:56:44 Operation Aborted! - Duration: 00:01:35 --> then aborted I 21:56:44 Average Write Rate: N/A - Maximum Write Rate: N/A I 21:57:07 Close Request Acknowledged I 21:57:07 Closing Down... I 21:57:07 Shutting down SPTI... I 21:57:07 ImgBurn closed! then i just try to re-burn it using the very same disc after checking the disc is still empty, and got 2nd log here : ; //****************************************\\ ; ImgBurn Version 2.5.0.0 - Log ; Selasa, 19 Januari 2010, 21:58:43 ; \\****************************************// ; ; I 21:57:12 ImgBurn Version 2.5.0.0 started! I 21:57:12 Microsoft Windows Vista Ultimate Edition (6.0, Build 6001 : Service Pack 1) I 21:57:12 Total Physical Memory: 3.107.036 KB - Available: 2.092.940 KB W 21:57:12 Drive F:\ (FAT32) does not support single files > 4 GB in size. W 21:57:12 SPTD can have a detrimental effect on drive performance. I 21:57:12 Initialising SPTI... I 21:57:12 Searching for SCSI / ATAPI devices... I 21:57:12 Found 1 DVD-ROM and 1 DVD±RW/RAM! I 21:57:31 Operation Started! I 21:57:31 Source File: E:\Movies\T2\Transformers2.mds I 21:57:31 Source File Sectors: 4.173.632 (MODE1/2048) I 21:57:31 Source File Size: 8.547.598.336 bytes I 21:57:31 Source File Volume Identifier: T2 I 21:57:31 Source File Volume Set Identifier: 4ABF83A100000000 I 21:57:31 Source File Application Identifier: MKISOFS ISO 9660/HFS FILESYSTEM BUILDER & CDRECORD CD-R/DVD CREATOR © 1993 E.YOUNGDALE © 1997 J.PEARSON/J.SCHILLING I 21:57:31 Source File Implementation Identifier: mkisofs I 21:57:31 Source File File System(s): ISO9660; UDF (1.02) I 21:57:31 Destination Device: [2:0:0] HL-DT-ST DVDRAM GSA-T50N RC04 (G:) (ATA) I 21:57:31 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2,4x; 4x; 6x) I 21:57:31 Destination Media Sectors: 4.173.632 I 21:57:31 Write Mode: DVD I 21:57:31 Write Type: DAO I 21:57:31 Write Speed: 2,4x I 21:57:31 Link Size: Auto I 21:57:31 Lock Volume: Yes I 21:57:31 Test Mode: No I 21:57:31 OPC: No I 21:57:31 BURN-Proof: Enabled I 21:57:31 Book Type Setting: N/A I 21:57:31 Optimal L0 Data Zone Capacity: 2.086.816 I 21:57:31 Optimal L0 Data Zone Method: Copied From Original Disc I 21:57:31 Set L0 Data Zone Capacity Succeeded! --> succedd again I 21:57:31 Filling Buffer... (40 MB) I 21:57:32 Writing LeadIn... I 21:57:34 Writing Session 1 of 1... (1 Track, LBA: 0 - 4173631) I 21:57:34 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4173631) I 21:57:34 Writing Layer 0... (LBA: 0 - 2086815) W 21:57:39 Failed to Write Sectors 5408 - 5439 - Reason: Focus Servo Error --> and then failed here W 21:57:39 Retrying (1 of 20)... W 21:57:39 Retry Failed - Reason: Invalid Address For Write W 21:57:39 Retrying (2 of 20)... W 21:57:39 Retry Failed - Reason: Invalid Address For Write W 21:57:39 Retrying (3 of 20)... W 21:57:39 Retry Failed - Reason: Invalid Address For Write W 21:57:39 Retrying (4 of 20)... W 21:57:39 Retry Failed - Reason: Invalid Address For Write W 21:57:39 Retrying (5 of 20)... W 21:57:39 Retry Failed - Reason: Invalid Address For Write W 21:57:39 Retrying (6 of 20)... W 21:57:39 Retry Failed - Reason: Invalid Address For Write W 21:57:39 Retrying (7 of 20)... W 21:57:39 Retry Failed - Reason: Invalid Address For Write W 21:57:39 Retrying (8 of 20)... W 21:57:39 Retry Failed - Reason: Invalid Address For Write W 21:57:39 Retrying (9 of 20)... W 21:57:39 Retry Failed - Reason: Invalid Address For Write W 21:57:39 Retrying (10 of 20)... W 21:57:39 Retry Failed - Reason: Invalid Address For Write W 21:57:39 Retrying (11 of 20)... W 21:57:39 Retry Failed - Reason: Invalid Address For Write W 21:57:39 Retrying (12 of 20)... W 21:57:39 Retry Failed - Reason: Invalid Address For Write W 21:57:39 Retrying (13 of 20)... W 21:57:39 Retry Failed - Reason: Invalid Address For Write W 21:57:39 Retrying (14 of 20)... W 21:57:39 Retry Failed - Reason: Invalid Address For Write W 21:57:39 Retrying (15 of 20)... W 21:57:39 Retry Failed - Reason: Invalid Address For Write W 21:57:39 Retrying (16 of 20)... W 21:57:39 Retry Failed - Reason: Invalid Address For Write W 21:57:39 Retrying (17 of 20)... W 21:57:39 Retry Failed - Reason: Invalid Address For Write W 21:57:39 Retrying (18 of 20)... W 21:57:39 Retry Failed - Reason: Invalid Address For Write W 21:57:39 Retrying (19 of 20)... W 21:57:39 Retry Failed - Reason: Invalid Address For Write W 21:57:39 Retrying (20 of 20)... W 21:57:39 Retry Failed - Reason: Invalid Address For Write E 21:57:45 Failed to Write Sectors 5408 - 5439 - Reason: Focus Servo Error E 21:57:45 Next Writable Address: 4880 I 21:57:45 Synchronising Cache... W 21:57:48 User opted to skip the 'Close Track/Session/Disc' functions. E 21:57:48 Failed to Write Image! I 21:57:48 Exporting Graph Data... I 21:57:48 Graph Data File: C:\Users\jj\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_DVDRAM_GSA-T50N_RC04_19-JANUARI-2010_21-57_MKM-003-00_2,4x.ibg I 21:57:48 Export Successfully Completed! E 21:57:48 Operation Failed! - Duration: 00:00:17 I 21:57:48 Average Write Rate: 983 KB/s (0.7x) - Maximum Write Rate: 3.313 KB/s (2.4x) I 21:58:43 Close Request Acknowledged I 21:58:43 Closing Down... I 21:58:43 Shutting down SPTI... I 21:58:43 ImgBurn closed! My big question is... does my dvd writer really need to upgrade from RC04 to RY05(i find it on firmwarehq) or do i have to find verbatim MKM-001? i already trashed 4 verbatim dvd+r dl MKM-003, and that's expensive here. i dont want to lose another one. i really need your confirmation. oooh, and i attach the graph data too. thank you in advance and imgburn is really great apps, remus HL-DT-ST_DVDRAM_GSA-T50N_RC04_19-JANUARI-2010_21-57_MKM-003-00_2,4x.ibg Link to comment Share on other sites More sharing options...
mmalves Posted February 1, 2010 Share Posted February 1, 2010 Try burning at 4x or 6x since those blanks are rated for 8x burning after all. You could also clean your burner using a lens cleaning disc, or even manually if you know how to do it. Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted February 1, 2010 Share Posted February 1, 2010 Burn faster. Clean the drive. Try some discs from a different spindle. You know the rest... try MKM-001 or get a new drive. Edit: Pipped at the post Link to comment Share on other sites More sharing options...
remus Posted February 2, 2010 Author Share Posted February 2, 2010 (edited) Burn faster. Clean the drive. Try some discs from a different spindle. You know the rest... try MKM-001 or get a new drive. Edit: Pipped at the post thanks for your opinions... but the reason i didn't burn faster than 2,4x is that i really wanted a quality result (descent burn quality)...that can survive for maybe another ten years? back in the old days when all i have is a cd writers with 48x write capability, all my disc burnt on 48x is now vanishing, means i can't read them with all cd and dvd drive i currently own. for cleaning the drive, well, just before and after that imgburn failed, i burnt my .avi collection using nero 9 to mistubishi dvd+r (single layer) and they succeeded. even just yesterday i burnt an iso to mitsubishi dvd+r single layer using imgburn and it suceeded. is that proved enough that my lens is clear? i always clean my notebook once a week, my working environment is indoor IT office which is very2 clean cause everyday office caretaker do clean my desk from dust. i never work and eat at the same time. so i guess it's not my lens. but i will clean my lens anyway, manually using cutton buds and alcohol? and for trying some disc from another spindle, i will, but since it's expensive here (about 3US$ each, already lost 12$ though), therefore i really need confirmation, is my drive firmware really need that upgrade? and how will i know that a media i want to buy has MKM-001 dye since the only way to know is putting the disc into dvd drive and use imgburn to read the info about the media? a new drive is not an opt. thanks remus Edited February 2, 2010 by remus Link to comment Share on other sites More sharing options...
mmalves Posted February 2, 2010 Share Posted February 2, 2010 Burning at the slowest speed doesn't necessarily result in a better quality burn, especially when using media rated for up to 8x write speed. If your drive can't produce a good burn at the other available speeds your only options are trying to find the Verbatim 2.4x DVD+R DL blanks or getting a new burner that likes the 8x Verbatim blanks you have. Link to comment Share on other sites More sharing options...
Recommended Posts